zoukankan      html  css  js  c++  java
  • Friendship POJ

    In modern society, each person has his own friends. Since all the people are very busy, they communicate with each other only by phone. You can assume that people A can keep in touch with people B, only if 
    1. A knows B’s phone number, or 
    2. A knows people C’s phone number and C can keep in touch with B. 
    It’s assured that if people A knows people B’s number, B will also know A’s number.

    Sometimes, someone may meet something bad which makes him lose touch with all the others. For example, he may lose his phone number book and change his phone number at the same time.

    In this problem, you will know the relations between every two among N people. To make it easy, we number these N people by 1,2,…,N. Given two special people with the number S and T, when some people meet bad things, S may lose touch with T. Your job is to compute the minimal number of people that can make this situation happen. It is supposed that bad thing will never happen on S or T. 
    Input 
    The first line of the input contains three integers N (2<=N<=200), S and T ( 1 <= S, T <= N , and S is not equal to T).Each of the following N lines contains N integers. If i knows j’s number, then the j-th number in the (i+1)-th line will be 1, otherwise the number will be 0.

    You can assume that the number of 1s will not exceed 5000 in the input. 
    Output 
    If there is no way to make A lose touch with B, print “NO ANSWER!” in a single line. Otherwise, the first line contains a single number t, which is the minimal number you have got, and if t is not zero, the second line is needed, which contains t integers in ascending order that indicate the number of people who meet bad things. The integers are separated by a single space.

    If there is more than one solution, we give every solution a score, and output the solution with the minimal score. We can compute the score of a solution in the following way: assume a solution is A1, A2, …, At (1 <= A1 < A2 <…< At <=N ), the score will be (A1-1)*N^t+(A2-1)*N^(t-1)+…+(At-1)*N. The input will assure that there won’t be two solutions with the minimal score.

    题目大意:目标人物T和S只要能间接联络到对方就算可以联络,如果T通过A和S联系,如果A换号码了,就切断了与T和S的联系,T和S就无法联系了,现在让我们找出最小要几个人(T和S不能发生事故)发生事故可以使S和T切断联系。

    简单来说就是切断网络流导致源点到汇点的流量为0就行,不过这题要切断的是点,所以需要把一个点拆成两个点,分别为x和x+n,x到x+n间连一条容量为1的边,然后所有入边连到x,出边从x+n发出,这样一来只要切断x到x+n间的那条边,这个点就不会有任何流量流过。初次求最大流的最大流量就是有几条通路可以使S和T保持联络,我们依次枚举所有点i拆成的i和i+n之间的边,将其容量修改为0,然后重新计算最大流(要清除边的flow),如果最大流减小了,则这个点切断会影响联络。

     以上内容来自   https://blog.csdn.net/hsj970319/article/details/62416798  

    #include <cstdio>
    #include <cstring>
    #include <queue>
    #include <cmath>
    #include <algorithm>
    #include <set>
    #include <iostream>
    #include <map>
    #include <stack>
    #include <string>
    #include <vector>
    #define pi acos(-1.0)
    #define eps 1e-6
    #define fi first
    #define se second
    #define lson l,m,rt<<1
    #define rson m+1,r,rt<<1|1
    #define bug         printf("******")
    #define mem(a,b)    memset(a,b,sizeof(a))
    #define fuck(x)     cout<<"["<<x<<"]"<<endl
    #define f(a)        a*a
    #define sf(n)       scanf("%d", &n)
    #define sff(a,b)    scanf("%d %d", &a, &b)
    #define sfff(a,b,c) scanf("%d %d %d", &a, &b, &c)
    #define pf          printf
    #define FRE(i,a,b)  for(i = a; i <= b; i++)
    #define FREE(i,a,b) for(i = a; i >= b; i--)
    #define FRL(i,a,b)  for(i = a; i < b; i++)
    #define FRLL(i,a,b) for(i = a; i > b; i--)
    #define FIN freopen("in.txt","r",stdin)
    #define lowbit(x)   x&-x
    #pragma comment (linker,"/STACK:102400000,102400000")
    using namespace std;
    const int maxn = 200004;
    typedef long long LL;
    const int MX = 10005;
    const int MXE = 4 * MX * MX;
    const LL INFLL = 0x3f3f3f3f3f3f3f3fLL;
    const int INF = 0x3f3f3f;
    int tot, num, s, t;
    int head[MX];
    struct Edge {
        int v, nxt;
        LL w;
    } edge[200010];
    
    void init() {
        memset (head, -1, sizeof (head) );
        tot = 0;
    }
    
    void add (int u, int v, LL w) {
        edge[tot].v = v;
        edge[tot].w = w;
        edge[tot].nxt = head[u];
        head[u] = tot++;
        edge[tot].v = u;
        edge[tot].w = 0;
        edge[tot].nxt = head[v];
        head[v] = tot++;
    }
    
    int  d[MX], vis[MX], gap[MX];
    void bfs() {
        memset (d, 0, sizeof (d) );
        memset (gap, 0, sizeof (gap) );
        memset (vis, 0, sizeof (vis) );
        queue<int>q;
        q.push (t);
        vis[t] = 1;
        while (!q.empty() ) {
            int u = q.front();
            q.pop();
            for (int i = head[u]; ~i; i = edge[i].nxt) {
                int v = edge[i].v;
                if (!vis[v]) {
                    d[v] = d[u] + 1;
                    gap[d[v]]++;
                    q.push (v);
                    vis[v] = 1;
                }
            }
        }
    }
    
    int last[MX];
    LL dfs (int u, LL f) {
        if (u == t) return f;
        LL sap = 0;
        for (int i = last[u]; ~i; i = edge[i].nxt) {
            int v = edge[i].v;
            if (edge[i].w > 0 && d[u] == d[v] + 1) {
                last[u] = i;
                LL tmp = dfs (v, min (f - sap, edge[i].w) );
                edge[i].w -= tmp;
                edge[i ^ 1].w += tmp;
                sap += tmp;
                if (sap == f) return sap;
            }
        }
        if (d[s] >= num) return sap;
        if (! (--gap[d[u]]) ) d[s] = num;
        ++gap[++d[u]];
        last[u] = head[u];
        return sap;
    }
    
    LL solve (int st, int ed, int n) {
        LL flow = 0;
        num = n;
        s = st;
        t = ed;
        bfs();
        memcpy (last, head, sizeof (head) );
        while (d[s] < num) flow += dfs (s, INFLL);
        return flow;
    }
    int n, sp, tp, x, cnt[505], mp[505][505];
    void build() {
        init();
        for (int i = 1 ; i <= n ; i++) {
            if (!cnt[i]) add(i, i + n, 1);
            for (int j = 1 ; j <= n ; j++) {
                if (mp[i][j] && i != j ) add(i + n, j, INF);
            }
        }
    }
    int main() {
        while(~scanf("%d%d%d", &n, &sp, &tp)) {
            int flag = 0;
            memset(cnt, 0, sizeof(cnt));
            for (int i = 1 ; i <= n ; i++) add(i, i + n, 1);
            for (int i = 1 ; i <= n ; i++) {
                for (int j = 1 ; j <= n ; j++) {
                    scanf("%d", &mp[i][j]);
                    if (mp[i][j] && ((i == sp && j == tp) || (i == tp && j == sp)))flag = 1;
                }
            }
            if (flag) {
                printf("NO ANSWER!
    ");
                continue;
            }
            build();
            int temp = (int)(solve(sp + n, tp, 3* n));
            printf("%d
    ", temp);
            vector<int>path;
            path.clear();
            for (int i = 1 ; i <= n ; i++) {
                if (i == sp || i == tp ) continue;
                cnt[i] = 1;
                build();
                if (temp > (int)(solve(sp + n, tp, 2 * n))) temp--, path.push_back(i);
                else cnt[i] = 0;
                if (temp <= 0) break;
            }
            for (int i = 0 ; i < path.size() ; i++)
                printf("%d%c", path[i], i == path.size() - 1 ? '
    ' : ' ');
        }
        return 0;
    }
  • 相关阅读:
    WebApi接口返回值不困惑:返回值类型详解
    Autofac 依赖注入框架 使用
    ASP.NET Core:使用Dapper和SwaggerUI来丰富你的系统框架
    ASP .Net Core 使用 Dapper 轻型ORM框架
    基于AspNet Core2.0 开发框架,包含简单的个人博客Demo
    Asp.Net MVC及Web API框架配置会碰到的几个问题及解决方案 (精髓)
    精简版自定义 jquery
    vs code 前端如何以服务器模式打开 [安装服务器] server insteall
    RestSharp用法小结
    翻译:WebApi 认证--用户认证Oauth解析
  • 原文地址:https://www.cnblogs.com/qldabiaoge/p/9415824.html
Copyright © 2011-2022 走看看