detect data races The cost of race detection varies by program, but for a typical program, memory usage may increase by 5-10x and execution time by 2-20x.

小结：

1、

conflicting access

2、性能危害 优化 

The cost of race detection varies by program, but for a typical program, memory usage may increase by 5-10x and execution time by 2-20x.

 3、典型案例与修复

Accidentally shared variable

// ParallelWrite writes data to file1 and file2, returns the errors.
func ParallelWrite(data []byte) chan error {
	res := make(chan error, 2)
	f1, err := os.Create("file1")
	if err != nil {
		res <- err
	} else {
		go func() {
			// This err is shared with the main goroutine,
			// so the write races with the write below.
			_, err = f1.Write(data)
			res <- err
			f1.Close()
		}()
	}
	f2, err := os.Create("file2") // The second conflicting write to err.
	if err != nil {
		res <- err
	} else {
		go func() {
			_, err = f2.Write(data)
			res <- err
			f2.Close()
		}()
	}
	return res
}

The fix is to introduce new variables in the goroutines (note the use of :=):

			...
			_, err := f1.Write(data)
			...
			_, err := f2.Write(data)
			...

Primitive unprotected variable ¶

Data races can happen on variables of primitive types as well (bool, int, int64, etc.), as in this example:

type Watchdog struct{ last int64 }

func (w *Watchdog) KeepAlive() {
	w.last = time.Now().UnixNano() // First conflicting access.
}

func (w *Watchdog) Start() {
	go func() {
		for {
			time.Sleep(time.Second)
			// Second conflicting access.
			if w.last < time.Now().Add(-10*time.Second).UnixNano() {
				fmt.Println("No keepalives for 10 seconds. Dying.")
				os.Exit(1)
			}
		}
	}()
}

Even such "innocent" data races can lead to hard-to-debug problems caused by non-atomicity of the memory accesses, interference with compiler optimizations, or reordering issues accessing processor memory .

A typical fix for this race is to use a channel or a mutex. To preserve the lock-free behavior, one can also use the sync/atomic package.

type Watchdog struct{ last int64 }

func (w *Watchdog) KeepAlive() {
	atomic.StoreInt64(&w.last, time.Now().UnixNano())
}

func (w *Watchdog) Start() {
	go func() {
		for {
			time.Sleep(time.Second)
			if atomic.LoadInt64(&w.last) < time.Now().Add(-10*time.Second).UnixNano() {
				fmt.Println("No keepalives for 10 seconds. Dying.")
				os.Exit(1)
			}
		}
	}()
}

Unsynchronized send and close operations

As this example demonstrates, unsynchronized send and close operations on the same channel can also be a race condition:

c := make(chan struct{}) // or buffered channel

// The race detector cannot derive the happens before relation
// for the following send and close operations. These two operations
// are unsynchronized and happen concurrently.
go func() { c <- struct{}{} }()
close(c)

According to the Go memory model, a send on a channel happens before the corresponding receive from that channel completes. To synchronize send and close operations, use a receive operation that guarantees the send is done before the close:

c := make(chan struct{}) // or buffered channel

go func() { c <- struct{}{} }()
<-c
close(c)

 4、

数据竞争产生场景：
1、循环计数
Race on loop counter
2、意外地共享变量
Accidentally shared variable
3、没有被保护的全局变量
Unprotected global variable
4、没有被保护的基本类型
Primitive unprotected variable
5、没有同步地在同样的chan上收发操作
Unsynchronized send and close operations

How to detect data races · YourBasic Go https://yourbasic.org/golang/detect-data-races/

Data races can happen easily and are hard to debug. Luckily, the Go runtime is often able to help.

Use -race to enable the built-in data race detector.

$ go test -race [packages]
$ go run -race [packages]

Example

Here’s a program with a data race:

package main
import "fmt"

func main() {
    i := 0
    go func() {
        i++ // write
    }()
    fmt.Println(i) // concurrent read
}

Running this program with the -race options tells us that there’s a race between the write at line 7 and the read at line 9:

$ go run -race main.go
0
==================
WARNING: DATA RACE
Write by goroutine 6:
  main.main.func1()
      /tmp/main.go:7 +0x44

Previous read by main goroutine:
  main.main()
      /tmp/main.go:9 +0x7e

Goroutine 6 (running) created at:
  main.main()
      /tmp/main.go:8 +0x70
==================
Found 1 data race(s)
exit status 66

Details

The data race detector does not perform any static analysis. It checks the memory access in runtime and only for the code paths that are actually executed.

It runs on darwin/amd64, freebsd/amd64, linux/amd64 and windows/amd64.

The overhead varies, but typically there’s a 5-10x increase in memory usage, and 2-20x increase in execution time.

Data Race Detector

Introduction Usage Report Format Options Excluding Tests How To Use Typical Data Races Race on loop counter

Accidentally shared variable Unprotected global variable Primitive unprotected variable Unsynchronized send and close operations Supported Systems Runtime Overhead

Introduction

Data races are among the most common and hardest to debug types of bugs in concurrent systems. A data race occurs when two goroutines access the same variable concurrently and at least one of the accesses is a write. See the The Go Memory Model for details.

Here is an example of a data race that can lead to crashes and memory corruption:

func main() {
	c := make(chan bool)
	m := make(map[string]string)
	go func() {
		m["1"] = "a" // First conflicting access.
		c <- true
	}()
	m["2"] = "b" // Second conflicting access.
	<-c
	for k, v := range m {
		fmt.Println(k, v)
	}
}

Usage

To help diagnose such bugs, Go includes a built-in data race detector. To use it, add the -race flag to the go command:

$ go test -race mypkg    // to test the package
$ go run -race mysrc.go  // to run the source file
$ go build -race mycmd   // to build the command
$ go install -race mypkg // to install the package

Report Format

When the race detector finds a data race in the program, it prints a report. The report contains stack traces for conflicting accesses, as well as stacks where the involved goroutines were created. Here is an example:

WARNING: DATA RACE
Read by goroutine 185:
  net.(*pollServer).AddFD()
      src/net/fd_unix.go:89 +0x398
  net.(*pollServer).WaitWrite()
      src/net/fd_unix.go:247 +0x45
  net.(*netFD).Write()
      src/net/fd_unix.go:540 +0x4d4
  net.(*conn).Write()
      src/net/net.go:129 +0x101
  net.func·060()
      src/net/timeout_test.go:603 +0xaf

Previous write by goroutine 184:
  net.setWriteDeadline()
      src/net/sockopt_posix.go:135 +0xdf
  net.setDeadline()
      src/net/sockopt_posix.go:144 +0x9c
  net.(*conn).SetDeadline()
      src/net/net.go:161 +0xe3
  net.func·061()
      src/net/timeout_test.go:616 +0x3ed

Goroutine 185 (running) created at:
  net.func·061()
      src/net/timeout_test.go:609 +0x288

Goroutine 184 (running) created at:
  net.TestProlongTimeout()
      src/net/timeout_test.go:618 +0x298
  testing.tRunner()
      src/testing/testing.go:301 +0xe8

Options

The GORACE environment variable sets race detector options. The format is:

GORACE="option1=val1 option2=val2"

The options are:

• log_path (default stderr): The race detector writes its report to a file named log_path.pid. The special names stdout and stderr cause reports to be written to standard output and standard error, respectively.
• exitcode (default 66): The exit status to use when exiting after a detected race.
• strip_path_prefix (default ""): Strip this prefix from all reported file paths, to make reports more concise.
• history_size (default 1): The per-goroutine memory access history is 32K * 2**history_size elements. Increasing this value can avoid a "failed to restore the stack" error in reports, at the cost of increased memory usage.
• halt_on_error (default 0): Controls whether the program exits after reporting first data race.
• atexit_sleep_ms (default 1000): Amount of milliseconds to sleep in the main goroutine before exiting.

Example:

$ GORACE="log_path=/tmp/race/report strip_path_prefix=/my/go/sources/" go test -race

Excluding Tests

When you build with -race flag, the go command defines additional build tag race. You can use the tag to exclude some code and tests when running the race detector. Some examples:

// +build !race

package foo

// The test contains a data race. See issue 123.
func TestFoo(t *testing.T) {
	// ...
}

// The test fails under the race detector due to timeouts.
func TestBar(t *testing.T) {
	// ...
}

// The test takes too long under the race detector.
func TestBaz(t *testing.T) {
	// ...
}

How To Use

To start, run your tests using the race detector (go test -race). The race detector only finds races that happen at runtime, so it can't find races in code paths that are not executed. If your tests have incomplete coverage, you may find more races by running a binary built with -race under a realistic workload.

Typical Data Races

Here are some typical data races. All of them can be detected with the race detector.

Race on loop counter

func main() {
	var wg sync.WaitGroup
	wg.Add(5)
	for i := 0; i < 5; i++ {
		go func() {
			fmt.Println(i) // Not the 'i' you are looking for.
			wg.Done()
		}()
	}
	wg.Wait()
}

The variable i in the function literal is the same variable used by the loop, so the read in the goroutine races with the loop increment. (This program typically prints 55555, not 01234.) The program can be fixed by making a copy of the variable:

func main() {
	var wg sync.WaitGroup
	wg.Add(5)
	for i := 0; i < 5; i++ {
		go func(j int) {
			fmt.Println(j) // Good. Read local copy of the loop counter.
			wg.Done()
		}(i)
	}
	wg.Wait()
}

Accidentally shared variable

// ParallelWrite writes data to file1 and file2, returns the errors.
func ParallelWrite(data []byte) chan error {
	res := make(chan error, 2)
	f1, err := os.Create("file1")
	if err != nil {
		res <- err
	} else {
		go func() {
			// This err is shared with the main goroutine,
			// so the write races with the write below.
			_, err = f1.Write(data)
			res <- err
			f1.Close()
		}()
	}
	f2, err := os.Create("file2") // The second conflicting write to err.
	if err != nil {
		res <- err
	} else {
		go func() {
			_, err = f2.Write(data)
			res <- err
			f2.Close()
		}()
	}
	return res
}

The fix is to introduce new variables in the goroutines (note the use of :=):

			...
			_, err := f1.Write(data)
			...
			_, err := f2.Write(data)
			...

Unprotected global variable

If the following code is called from several goroutines, it leads to races on the service map. Concurrent reads and writes of the same map are not safe:

var service map[string]net.Addr

func RegisterService(name string, addr net.Addr) {
	service[name] = addr
}

func LookupService(name string) net.Addr {
	return service[name]
}

To make the code safe, protect the accesses with a mutex:

var (
	service   map[string]net.Addr
	serviceMu sync.Mutex
)

func RegisterService(name string, addr net.Addr) {
	serviceMu.Lock()
	defer serviceMu.Unlock()
	service[name] = addr
}

func LookupService(name string) net.Addr {
	serviceMu.Lock()
	defer serviceMu.Unlock()
	return service[name]
}

Primitive unprotected variable

Data races can happen on variables of primitive types as well (bool, int, int64, etc.), as in this example:

type Watchdog struct{ last int64 }

func (w *Watchdog) KeepAlive() {
	w.last = time.Now().UnixNano() // First conflicting access.
}

func (w *Watchdog) Start() {
	go func() {
		for {
			time.Sleep(time.Second)
			// Second conflicting access.
			if w.last < time.Now().Add(-10*time.Second).UnixNano() {
				fmt.Println("No keepalives for 10 seconds. Dying.")
				os.Exit(1)
			}
		}
	}()
}

Even such "innocent" data races can lead to hard-to-debug problems caused by non-atomicity of the memory accesses, interference with compiler optimizations, or reordering issues accessing processor memory .

A typical fix for this race is to use a channel or a mutex. To preserve the lock-free behavior, one can also use the sync/atomic package.

type Watchdog struct{ last int64 }

func (w *Watchdog) KeepAlive() {
	atomic.StoreInt64(&w.last, time.Now().UnixNano())
}

func (w *Watchdog) Start() {
	go func() {
		for {
			time.Sleep(time.Second)
			if atomic.LoadInt64(&w.last) < time.Now().Add(-10*time.Second).UnixNano() {
				fmt.Println("No keepalives for 10 seconds. Dying.")
				os.Exit(1)
			}
		}
	}()
}

Unsynchronized send and close operations

As this example demonstrates, unsynchronized send and close operations on the same channel can also be a race condition:

c := make(chan struct{}) // or buffered channel

// The race detector cannot derive the happens before relation
// for the following send and close operations. These two operations
// are unsynchronized and happen concurrently.
go func() { c <- struct{}{} }()
close(c)

According to the Go memory model, a send on a channel happens before the corresponding receive from that channel completes. To synchronize send and close operations, use a receive operation that guarantees the send is done before the close:

c := make(chan struct{}) // or buffered channel

go func() { c <- struct{}{} }()
<-c
close(c)

Supported Systems

The race detector runs on linux/amd64, linux/ppc64le, linux/arm64, freebsd/amd64, netbsd/amd64, darwin/amd64, and windows/amd64.

Runtime Overhead

The cost of race detection varies by program, but for a typical program, memory usage may increase by 5-10x and execution time by 2-20x.

The race detector currently allocates an extra 8 bytes per defer and recover statement. Those extra allocations are not recovered until the goroutine exits. This means that if you have a long-running goroutine that is periodically issuing defer and recover calls, the program memory usage may grow without bound. These memory allocations will not show up in the output of runtime.ReadMemStats or runtime/pprof.