Docker网络

一、Docker网络命名空间

1、利用busybox启动两个容器

• 启动test1容器

[root@localhost ~]# docker run -d --name test1 busybox /bin/sh -c "while true; do sleep 3600; done "  #启动test1容器

• 启动test2容器

[root@localhost ~]# docker run -d --name test2 busybox /bin/sh -c "while true; do sleep 3600; done "

2、进入容器中查看网络

• 进入test1容器查看网络

[root@localhost ~]# docker exec -it 90964ccfc53d  /bin/sh
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
12: eth0@if13: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue 
    link/ether 02:42:ac:11:00:03 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.3/16 brd 172.17.255.255 scope global eth0
       valid_lft forever preferred_lft forever
/ # 

• 进入test2容器查看网络

[root@localhost ~]# docker exec -it 08d4fa600414 /bin/sh
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
6: eth0@if7: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue 
    link/ether 02:42:ac:11:00:02 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.2/16 brd 172.17.255.255 scope global eth0
       valid_lft forever preferred_lft forever

可以看到两个容器产生的ip不一样，也就是说每一个容器有自己的网络，那么它们之间是否可以通信呢？

我们可以在test2容器中尝试ping第一个容器：

[root@localhost ~]# docker exec -it 90964ccfc53d  /bin/sh
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
12: eth0@if13: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue 
    link/ether 02:42:ac:11:00:03 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.3/16 brd 172.17.255.255 scope global eth0
       valid_lft forever preferred_lft forever
/ # ping 172.17.0.2
PING 172.17.0.2 (172.17.0.2): 56 data bytes
64 bytes from 172.17.0.2: seq=0 ttl=64 time=0.194 ms
64 bytes from 172.17.0.2: seq=1 ttl=64 time=0.068 ms
64 bytes from 172.17.0.2: seq=2 ttl=64 time=0.088 ms
64 bytes from 172.17.0.2: seq=3 ttl=64 time=0.070 ms
64 bytes from 172.17.0.2: seq=4 ttl=64 time=0.100 ms

可以看到是可以进行通信的，所以每一个容器都有自己的网络命名空间，并且容器之间是可以进行通信的。

二、Docker网络

我们可以先看看Docker中的网络情况：

[root@localhost ~]# docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
4657ce390049        bridge              bridge              local
2582de0db573        host                host                local
d81e2ab77dcf        none                null                local

可以看到有bridge、host、以及none三种情况。

（一） bridge

1、bridge网络详情

通过docker network inspect + id查看具体网络情况：

[root@localhost ~]# docker network inspect 4657ce390049
[
    {
        "Name": "bridge",
        "Id": "4657ce390049c246dfb67dad34ad8e456958b2875d71fb2214269aa71642eda2",
        "Created": "2020-01-31T10:04:59.74388944+08:00",
        "Scope": "local",
        "Driver": "bridge",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": [
                {
                    "Subnet": "172.17.0.0/16",
                    "Gateway": "172.17.0.1"
                }
            ]
        },
        "Internal": false,
        "Attachable": false,
        "Ingress": false,
        "ConfigFrom": {
            "Network": ""
        },
        "ConfigOnly": false,
        "Containers": {
            "08d4fa6004147b171820d7f81903e7af7ccff38498082365383ca4855e9d6482": {
                "Name": "test2",
                "EndpointID": "c2d18508f072d899f55302e2277976c43895163b0b58b95fbabc08041d9dd55a",
                "MacAddress": "02:42:ac:11:00:02",
                "IPv4Address": "172.17.0.2/16",
                "IPv6Address": ""
            },
            "90964ccfc53d5a8c4a35a0e53f2f022205df39294daacbd6175703a704688cd4": {
                "Name": "test3",
                "EndpointID": "7f08319a7959f34be312ea03d21353edeb21b12ed4dac619b83b4c9c86065625",
                "MacAddress": "02:42:ac:11:00:03",
                "IPv4Address": "172.17.0.3/16",
                "IPv6Address": ""
            }
        },
        "Options": {
            "com.docker.network.bridge.default_bridge": "true",
            "com.docker.network.bridge.enable_icc": "true",
            "com.docker.network.bridge.enable_ip_masquerade": "true",
            "com.docker.network.bridge.host_binding_ipv4": "0.0.0.0",
            "com.docker.network.bridge.name": "docker0",
            "com.docker.network.driver.mtu": "1500"
        },
        "Labels": {}
    }
]

 可以看到这是Bridge网络的详情，其中container中有test2这个容器使用的就是这个网络。

2、容器之间的通信

容器之间是如何进行通信的呢？

• 一个容器的网络

我们先看看主机上的网络：

[root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:f4:16:7e brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.109/24 brd 192.168.0.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::84a4:73f5:46d2:79d3/64 scope link 
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:de:c3:4c brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:de:c3:4c brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 02:42:a2:8a:59:a5 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:a2ff:fe8a:59a5/64 scope link 
       valid_lft forever preferred_lft forever
7: veth309f7b4@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP 
    link/ether be:d5:f3:b1:0b:0b brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet6 fe80::bcd5:f3ff:feb1:b0b/64 scope link 
       valid_lft forever preferred_lft forever

可以看到上面的网络有很多，但是注意docker0这个网络，目前运行的容器有一个：

[root@localhost ~]# docker ps
CONTAINER ID        IMAGE               COMMAND                  CREATED             STATUS              PORTS               NAMES
08d4fa600414        busybox             "/bin/sh -c 'while t…"   About an hour ago   Up About an hour                        test2

那么上面第7个网络veth309f7b4其实连接的就是docker0这个网络，我们可以通过以下命令查看：

[root@localhost ~]# brctl show
bridge name    bridge id        STP enabled    interfaces
docker0        8000.0242a28a59a5    no        veth309f7b4

可以看到interfaces中值和第7个是一样的。

• 两个容器的网路

我们再运行一个容器：

[root@localhost ~]# docker run -d --name test3 busybox /bin/sh -c "while true; do sleep 3600; done "
74859a31d0bf3d0d8a2664a3de7a95a54576350b79bb764b9f5085d66d258b1a
[root@localhost ~]# docker ps
CONTAINER ID        IMAGE               COMMAND                  CREATED             STATUS              PORTS               NAMES
74859a31d0bf        busybox             "/bin/sh -c 'while t…"   10 seconds ago      Up 4 seconds                            test3
08d4fa600414        busybox             "/bin/sh -c 'while t…"   About an hour ago   Up About an hour                        test2

目前有两个容器，再看看网络情况，首先主机网络情况：

[root@localhost ~]# ip a
...
...
5: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 02:42:a2:8a:59:a5 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:a2ff:fe8a:59a5/64 scope link 
       valid_lft forever preferred_lft forever
7: veth309f7b4@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP 
    link/ether be:d5:f3:b1:0b:0b brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet6 fe80::bcd5:f3ff:feb1:b0b/64 scope link 
       valid_lft forever preferred_lft forever
15: veth48166c0@if14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP 
    link/ether 5a:f2:df:c2:7f:80 brd ff:ff:ff:ff:ff:ff link-netnsid 1
    inet6 fe80::58f2:dfff:fec2:7f80/64 scope link 
       valid_lft forever preferred_lft forever

我们观察多了一个15的网络，那么它连接的是谁呢？

[root@localhost ~]# brctl show
bridge name    bridge id        STP enabled    interfaces
docker0        8000.0242a28a59a5    no        veth309f7b4
                                              veth48166c0

可以看到它连接的还是docker0这个Bridge网络。另外可以看到test3容器的网络情况：

[root@localhost ~]# docker exec -it 74859a31d0bf ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue 
    link/ether 02:42:ac:11:00:03 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.3/16 brd 172.17.255.255 scope global eth0
       valid_lft forever preferred_lft forever

• 总结

 可以看到每一个容器与docker0之间的相连都是通过一对接口进行连接，这样通过docker0间接的达到容器之间的通信。

•  容器之间的link

　　上面我们可以看出来，容器之间ping通是需要通过ip地址进行通信的，那么link的好处就是在启动容器时，通过link参数直接指定容器的名称，这样就可以直接通过容器名称通信而不需要ip地址：

创建容器test1：

[root@localhost ~]# docker run -d --name test1 busybox /bin/sh -c "while true; do sleep 3600; done "
b5ab3edf65f7687cc95cd23d01c5dd04bbc15c291f231a38a684ade889908ecd

创建容器test2，并且通过link参数指定test1：

[root@localhost ~]# docker run -d --name test2 --link test1 busybox /bin/sh -c "while true; do sleep 3600; done " 
cd8e333b7c96388318c9a5d9436997fea8a722343ca745dcbe60d5e256cf4433

这样，我们可以进入到test2中，然后去尝试通过名称连接test1:

[root@localhost ~]# docker exec -it test2 /bin/sh
/ # ping test1
PING test1 (172.17.0.2): 56 data bytes
64 bytes from 172.17.0.2: seq=0 ttl=64 time=0.235 ms
64 bytes from 172.17.0.2: seq=1 ttl=64 time=0.087 ms
64 bytes from 172.17.0.2: seq=2 ttl=64 time=0.090 ms

　　显然，这样是可行的，但是如果我们进入到test1，然后通过name去连接test2的话是会失败的，因为link是有指向性的。这个是默认的bridge所限制的，但是如果是自己搭建的网络bridge就不是这种情况了。

3、自创建bridge网络

在此之前，先再看一看主机上的网络情况：

[root@localhost ~]# docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
3198a081bd7f        bridge              bridge              local
2582de0db573        host                host                local
d81e2ab77dcf        none                null                local

• 创建bridge网络

[root@localhost ~]# docker network create -d bridge my-bridge
2d6d1e198a6c2e3f98c1b6afcac19a4a7cd106d1da1029d41a73c00a0729fd5f
[root@localhost ~]# docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
3198a081bd7f        bridge              bridge              local
2582de0db573        host                host                local
2d6d1e198a6c        my-bridge           bridge              local
d81e2ab77dcf        none                null                local

目前还没有容器来连接它：

[root@localhost ~]# brctl show
bridge name    bridge id        STP enabled    interfaces
br-2d6d1e198a6c        8000.0242ae7aebe7    no        
docker0        8000.024287a39934    no        vethbc08bb5
                                              vethf24eba9

• 创建容器test3来连接my-bridge网络

[root@localhost ~]# docker run -d --name test3 --network my-bridge busybox /bin/sh -c "while true; do sleep 3600; done "
e87b1468c7df57080177500135f6dd0e935894c447cfda47bae395affe5f58d0

此时再看，已经有一个接口了：

[root@localhost ~]# brctl show
bridge name    bridge id        STP      enabled       interfaces
br-2d6d1e198a6c        8000.0242ae7aebe7    no         vethb722bba
docker0        8000.024287a39934            no         vethbc08bb5
                                                       vethf24eba9

• 让容器test2的网络由bridge变成my-bridge

[root@localhost ~]# docker network connect my-bridge test2
[root@localhost ~]# brctl show
bridge name    bridge id        STP enabled           interfaces
br-2d6d1e198a6c        8000.0242ae7aebe7    no        vethb722bba
                                                      vethd2f00a0
docker0        8000.024287a39934    no                vethbc08bb5
                                                      vethf24eba9

可以看到my-bridge上已经有两个接口了，此时我们进入到其中的一个容器然后通过name去通信。

• my-bridge上的容器互相通信

[root@localhost ~]# docker exec -it test2 /bin/sh   #进入test2
/ # ping test3
PING test3 (172.18.0.2): 56 data bytes
64 bytes from 172.18.0.2: seq=0 ttl=64 time=1.972 ms
64 bytes from 172.18.0.2: seq=1 ttl=64 time=0.096 ms
64 bytes from 172.18.0.2: seq=2 ttl=64 time=0.081 ms


[root@localhost ~]# docker exec -it test3 /bin/sh #进入test3
/ # ping test2
PING test2 (172.18.0.3): 56 data bytes
64 bytes from 172.18.0.3: seq=0 ttl=64 time=0.141 ms
64 bytes from 172.18.0.3: seq=1 ttl=64 time=0.076 ms
64 bytes from 172.18.0.3: seq=2 ttl=64 time=0.078 ms

• 总结

如果是自建的bridge网络，不需要通过link参数，而是本身自己在连接my-bridge已经ip和name进行了映射，我们通过名字就可以了，类似于DNS。

（二）host、none 

1、host

• 创建host网络的容器

[root@localhost ~]# docker run -d --name test1 --network host busybox /bin/sh -c "while true; do sleep 3600; done "
cdedc9c7525bdfad4642c95d1d0c2dfc1b018b4a28672e1547f2b55391c9dbdf

• 查看host网络

[root@localhost ~]# docker network inspect host
[
    {
        "Name": "host",
        "Id": "2582de0db573f47b1cf71cb691f5f2d72e0626b0f2574c5a861f582b981388a3",
        "Created": "2019-07-02T22:55:28.657713062+08:00",
        "Scope": "local",
        "Driver": "host",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": []
        },
        "Internal": false,
        "Attachable": false,
        "Ingress": false,
        "ConfigFrom": {
            "Network": ""
        },
        "ConfigOnly": false,
        "Containers": {
            "cdedc9c7525bdfad4642c95d1d0c2dfc1b018b4a28672e1547f2b55391c9dbdf": {
                "Name": "test1",
                "EndpointID": "6b36692de2f89381a53978427ee57066dd35238a326ceccd05bd7ab3fcfb9678",
                "MacAddress": "",
                "IPv4Address": "",
                "IPv6Address": ""
            }
        },
        "Options": {},
        "Labels": {}
    }
]

　　可以看到host网络中目前只有一个容器正在使用，就是我们刚刚创建的，但是注意它的MacAddress、IPv4Address、IPv6Address都是空的。此时我们再进入test1容器中查看容器网络情况。

• 容器网络情况

[root@localhost ~]# docker exec -it test1 /bin/sh
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:0c:29:f4:16:7e brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.109/24 brd 192.168.0.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::84a4:73f5:46d2:79d3/64 scope link 
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue qlen 1000
    link/ether 52:54:00:de:c3:4c brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 qlen 1000
    link/ether 52:54:00:de:c3:4c brd ff:ff:ff:ff:ff:ff
5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue 
    link/ether 02:42:87:a3:99:34 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:87ff:fea3:9934/64 scope link 
       valid_lft forever preferred_lft forever
10: br-2d6d1e198a6c: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue 
    link/ether 02:42:ae:7a:eb:e7 brd ff:ff:ff:ff:ff:ff
    inet 172.18.0.1/16 brd 172.18.255.255 scope global br-2d6d1e198a6c
       valid_lft forever preferred_lft forever
    inet6 fe80::42:aeff:fe7a:ebe7/64 scope link 
       valid_lft forever preferred_lft forever
16: veth84e019c@if15: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master br-2d6d1e198a6c 
    link/ether ce:24:54:b5:2e:5c brd ff:ff:ff:ff:ff:ff
    inet6 fe80::cc24:54ff:feb5:2e5c/64 scope link 
       valid_lft forever preferred_lft forever

容器内的网络很全面，实际上与主机网络做比较后，我们发现它的网络与主机共享同一套网络：

[root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:f4:16:7e brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.109/24 brd 192.168.0.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::84a4:73f5:46d2:79d3/64 scope link 
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:de:c3:4c brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:de:c3:4c brd ff:ff:ff:ff:ff:ff
5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN 
    link/ether 02:42:87:a3:99:34 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:87ff:fea3:9934/64 scope link 
       valid_lft forever preferred_lft forever
10: br-2d6d1e198a6c: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 02:42:ae:7a:eb:e7 brd ff:ff:ff:ff:ff:ff
    inet 172.18.0.1/16 brd 172.18.255.255 scope global br-2d6d1e198a6c
       valid_lft forever preferred_lft forever
    inet6 fe80::42:aeff:fe7a:ebe7/64 scope link 
       valid_lft forever preferred_lft forever
16: veth84e019c@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-2d6d1e198a6c state UP 
    link/ether ce:24:54:b5:2e:5c brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet6 fe80::cc24:54ff:feb5:2e5c/64 scope link 
       valid_lft forever preferred_lft forever

这样，host网络与主机共享同一套网络空间命名，这样出现的问题就是端口冲突。

2、none

• 创建none网络容器

[root@localhost ~]# docker run -d --name test1 --network none busybox /bin/sh -c "while true; do sleep 3600; done "
a49418c5e24b5019b0931345bf9ade0caaddde2e615f595008f2d91c0eb62958

• 查看none网络

[root@localhost ~]# docker network inspect none
[
    {
        "Name": "none",
        "Id": "d81e2ab77dcf63710f745b2c14d5bee4f46d252abc411bbc42a82d0820fe34d5",
        "Created": "2019-07-02T22:55:28.453452746+08:00",
        "Scope": "local",
        "Driver": "null",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": []
        },
        "Internal": false,
        "Attachable": false,
        "Ingress": false,
        "ConfigFrom": {
            "Network": ""
        },
        "ConfigOnly": false,
        "Containers": {
            "a49418c5e24b5019b0931345bf9ade0caaddde2e615f595008f2d91c0eb62958": {
                "Name": "test1",
                "EndpointID": "881efcbab7ae4f37772a3732183228321d5202d3bd121e71a8bcab02a90f9f72",
                "MacAddress": "",
                "IPv4Address": "",
                "IPv6Address": ""
            }
        },
        "Options": {},
        "Labels": {}
    }
]

可以看到none网络中刚刚创建的容器也是没有MacAddress、IPv4Address、IPv6Address信息。

• 容器内部网络

[root@localhost ~]# docker exec -it test1 ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
failed to resize tty, using default size

可以看到没有多余的网路，这样也就造成了无法通信。

3、总结

目前普遍用bridge网络的情况较多，而host和none网络的情况较少。