zoukankan      html  css  js  c++  java
  • linux 压缩文件的命令总结

    Linux压缩文件的读取

    • *.Z       compress 程序压缩的档案;
    • *.bz2     bzip2 程序压缩的档案;
    • *.gz      gzip 程序压缩的档案;
    • *.tar     tar 程序打包的数据,并没有压缩过;
    • *.tar.gz  tar 程序打包的档案,其中并且经过 gzip 的压缩!
    • *.zip     zip 程序压缩文件
    • *.rar     rar 程序压缩文件

    Compress压缩文件

    [root@test /root]# cp /etc/man.config /root 
    [root@test /root]# compress man.config //压缩man.config这个文件

    [root@test /root]# compress -d man.config.Z  //-d 解压缩这个文件
    [root@test /root]# uncompress man.config.Z  //解压缩这个文件

    当你以 compress 压缩之后,如果没有下达其它的参数,那么原本的档案就会被后来的 *.Z 所取代!

    Gzip压缩文件和zcat

    [root@test /root]# gzip [-d#] filename <==压缩与解压缩 
    [root@test /root]# zcat filename.gz     <==读取压缩档内容 
    参数说明:  
    -d  :解压缩的参数! 

    -r  :递归处理,将指定目录下的所有文件及子目录一并处理
    -#  :压缩等级, 1 最不好, 9 最好, 6 是默认值!

    [root@test /root]# gzip man.config   //会产生 man.config.gz 这个档案 

    [root@test /root]# zcat man.config.gz //会读取出 man.config 的内容

    [root@test /root]# gzip -d man.config.gz  
    [root@test /root]# gunzip man.config.gz 
    解压缩,产生 man.config 这个档案

    [root@test /root]# gzip -9 man.config  //以最大压缩比压缩 testing 这个档案!

    [root@test /root]# gzip -r filename.gz file1 file2 file3 /usr/work/school 
    //file1file2 file3、以及 /usr/work/school 目录的内容(假设这个目录存在)压缩起来,然后放入 filename.bz2 文件中

    Bzip2压缩文件和bzcat

    [root@test /root]# bzip2 [-dz] filename <==压缩解压缩指令 
    [root@test /root]# bzcat filename.bz2   <==读取压缩文件内容指令 
    参数说明: 
    -d  :解压缩的意思!
     
    -z  :压缩的意思! 

    范例: 
    同样的,我们以刚刚拷贝过来的 /root/man.config 这个档案为例
     
    [root@test /root]# bzip2 –z man.config 
    [root@test /root]# bzcat man.config.bz2 
    [root@test /root]# bzip2 –d man.config.bz2 
    [root@test /root]# bunzip2 man.config.bz2

    [root@test /root]# bzip2 filename.bz2 file1 file2 file3 /usr/work/school  

    //file1file2 file3、以及 /usr/work/school 目录的内容(假设这个目录存在)压缩起来,然后放入 filename.bz2 文件中

    Tar压缩文件

    [root@test /root]# tar [-zxcvfpP] filename  
    [root@test /root]# 
    tar -N 'yyyy/mm/dd' /path -zcvf target.tar.gz source  
    参数说明:  
    -z  :是否同时具有 gzip 的属性?
      
    -x  :解开一个压缩档案的参数指令!
      
    -t  :查看 tarfile 里面的档案!
     
    -c  :建立一个压缩档案的参数指令
      
    -v  :压缩的过程中显示档案!
      
    -f  :使用档名,请留意,在 f 之后要立即接档名喔!不要再加参数!
     
       例如使用『 tar -zcvfP tfile sfile』就是错误的写法,要写成
     
       『 tar -zcvPf tfile sfile』才对喔!
     
    -p  :使用原档案的原来属性(属性不会依据使用者而变)
      
    -P  :可以使用绝对路径
      
    -N  :比后面接的日期(yyyy/mm/dd)还要新的才会被打包进新建的档案中!
      
    --exclude FILE:在压缩的过程中,不要将 FILE 打包!  

    范例:  
    [root@test /root]# tar -cvf directory.tar directory 

    //只将目录整合打包成一个档案 

    [root@test /root]# tar -zcvf directory.tar.gz directory  
    除了将目录打包外,同时以 gzip 压缩 

    [root@test /root]# tar -zcvf filename.tar.gz  /home/test/*  
    将 /home/test/ 这个目录下的档案全部打包并压缩成为一个 filename.tar.gz 的档案

    [root@test /root]# tar -jcvf /tmp/etc.tar.bz2 /etc <==打包后,以 bzip2 压缩

    [root@test /root]# tar -xvf  directory.tar  
    解 tar 的封包,请注意,由于没有 gzip (.tar 而非 .tar.gz) 的作用,所以只要使用 –xvf 即可!不需要加上 z ,否则会显示有问题!

    [root@test /root]# tar -zxvf directory.tar.gz  
    这个就是有加上 gzip 的压缩的结果!所以需要加上 –z 哦!

    [root@test /root]# tar –ztvf directory.tar.gz 
    这个 t 可以用来查看 tar 里面的档案信息呢!而不需要将他解开!

    [root@test /root]# tar -zcvPf home.tar.gz /home  
    则建立起来的压缩档内档案为绝对路径  
    请注意,使用这个 P 的参数时,不要将 P 加在 f 后面,因为
     
    f 之后要立即接档名才行喔!

    [root@test /root]# tar -N '2002/06/25' -zcvf home.tar.gz /home  
    上面是说 在 /home 这个目录中,比 2002/06/25 日还要新的档案才会被打包进入 home.tar.gz这个档案中! 

    [root@test /root]# tar -zcvf host.tar.gz / --exclude /mnt --exclude /proc  
    上面是说,将根目录的所有数据都打包进 host.tar.gz 这个档案中,但是 /mnt 及 /proc 则不打包! 

    [root@test /root]# tar -cvf - /home | tar -xvf - 
    上面的意思是『将 /home 打包之后,直接解压缩在 /root 底下!』嘿嘿!不需要再建立一次中间档案!不过,使用上面的语法最好使用『绝对路径』,比较不会有问题!这个方式适合不想要建立中间档案时!

    Zip和unzip压缩文件

    [root@test /root]# zip -r myfile.zip ./*  //将当前目录下的所有文件和文件夹全部压缩成myfile.zip文件,-r表示递归压缩子目录下所有文件.

    [root@test /root]# zip -d myfile.zip smart.txt  //删除压缩文件中smart.txt文件

    [root@test /root]# zip -m myfile.zip ./rpm_info.txt //向压缩文件中myfile.zip中添加rpm_info.txt文件

    [root@test /root]# unzip -o -d /home/sunny myfile.zip //把myfile.zip文件解压到/home/sunny/

    Rar压缩文件

    现在网上多数压缩包是rar格式的,所以需要一个rar工具。

    首先在http://www.rarlab.com/download.htm下载RAR 3.60 beta 6 for Linux

    我解压到/opt下,会自动建立rar目录。这个工具无需编译可以直接使用。

    在$HOME目录下建立bin目录。

    在bin目录中建立一个链接。ln -s /opt/rar/rar rar。

    就可以用rar工具压缩和解压.rar文件了。不过此工具是命令方式的,和在DOS下的RAR操作是一样的。

  • 相关阅读:
    How to Create a site at the specified URL and new database (CommandLine Operation)
    Using Wppackager to Package and Deploy Web Parts for Microsoft SharePoint Products and Technologies
    SQL Server Monitor v0.5 [Free tool]
    How to build Web Part
    Deploy web part in a virtual server by developing a Web Part Package file(.cab)
    How to recreate "sites" link if you delete it accidentally
    SharePoint Portal Server管理匿名访问设置
    Monitor sql connection from .Net SqlClient Data Provider
    Brief installation instruction of Sharepoint Portal Server
    How to Use SharePoint Alternate URL Access
  • 原文地址:https://www.cnblogs.com/shudonghe/p/3191182.html
Copyright © 2011-2022 走看看