3台虚拟机都是20G磁盘，用着用着发现不够了，先扩容了一台，各种百度...各种坑，每个人的情况不一样，发现不一样的地方最后立即百度查看。一台扩容成功后，打算再扩容一台，目的是留一个记录。（我是用xshell超级用户链接的的虚拟机）
扩容大致分为3步：1.外部设置；2.设置分区；3.重启；4挂载；（挂载过程中解决了物理卷、卷组、逻辑卷、格式化问题，如果挂载失败，则可以一次解决排除这些问题）
1.关闭虚拟机（不是挂起），点击“虚拟机/设置”，选择“硬盘”，扩容至40G
2.启动虚拟机，root用户进入linux系统，添加新的分区
2.1查看当前分区状况
[root@slave1 /root]$ fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000381a8
Device Boot Start End Blocks Id System
/dev/sda1 * 1 39 307200 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 39 2358 18631680 83 Linux
/dev/sda3 2358 2611 2031616 82 Linux swap / Solaris
当前最大分区为sda3，新创建的分区为sda4。（请留意加重部分）
2.2输入以下命令
[root@slave1 /root]$ fdisk /dev/sda
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m #2.3命令行提示下输入【m】
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n #输入命令【n】添加新分区
Command action
e extended
p primary partition (1-4)
p #输入命令【p】创建主分区。
Selected partition 4
First cylinder (2611-5221, default 2611): #回车
Using default value 2611
Last cylinder, +cylinders or +size{K,M,G} (2611-5221, default 5221): #回车
Using default value 5221
Command (m for help): w #输入【w】保存
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@slave1 /]$ mkdir disk4 [root@slave1 /]$ mount /dev/sda4 /disk4 mount: you must specify the filesystem type
挂载的时候发生了报错，看红色字体，原因可能是没有物理卷、卷组、逻辑卷、格式化引起的（4.1，4.2，4.3主要用于解决这3个问题）
4.1查看物理卷：
[root@slave1 /]$ pvs
没有输出！！！说明没有物理卷，创建的分区是sda4，这里为这个分区创建物理卷。
[root@slave1 /]$ pvcreate /dev/sda4 Physical volume "/dev/sda4" successfully created
此时再查看物理卷，ok
[root@slave1 /]$ pvs PV VG Fmt Attr PSize PFree /dev/sda4 lvm2 a-- 19.99g 19.99g
4.2查看卷组
[root@slave1 /]$ vgs
No volume groups found
报错，没有，先创建卷组vgdata
[root@slave1 /]$ vgcreate vgdata /dev/sda4 Volume group "vgdata" successfully created
再次查看卷组，OK！！！
[root@slave1 /]$ vgs VG #PV #LV #SN Attr VSize VFree vgdata 1 1 0 wz--n- 19.99g 15.09g [root@slave1 /]$ vgdisplay --- Volume group --- VG Name vgdata System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 19.99 GiB PE Size 4.00 MiB Total PE 5118 Alloc PE / Size 1255 / 4.90 GiB Free PE / Size 3863 / 15.09 GiB VG UUID f8keeP-x5yH-qdfd-9roM-hbAt-ALEI-yYG4wB
4.3查看逻辑卷
[root@slave1 /]$ lvdisplay No volume groups found
报错，没有，创建逻辑卷
[root@slave1 /]$ lvcreate -L4.9G vgdata -n lvolhome /dev/sda4 Rounding up size to full physical extent 4.90 GiB Logical volume "lvolhome" created
查看创建结果，OK!!!
[root@slave1 /]$ lvdisplay --- Logical volume --- LV Path /dev/vgdata/lvolhome LV Name lvolhome VG Name vgdata LV UUID dI2lMQ-sayc-XGlG-xa9I-USfC-97kt-0Kbt6k LV Write Access read/write LV Creation host, time slave1, 2018-04-27 23:23:00 -0700 LV Status available # open 0 LV Size 4.90 GiB Current LE 1255 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0
4.4格式化磁盘
[root@slave1 /]$ mkfs.ext4 /dev/sda4 mke2fs 1.41.12 (17-May-2010) /dev/sda4 is apparently in use by the system; will not make a filesystem here!
报错、手动移除DM管理
[root@slave1 /]$ dmsetup status vgdata-lvolhome: 0 10280960 linear [root@slave1 /]$ dmsetup remove_all [root@slave1 /]$ dmsetup status No devices found
重新格式化，OK！！！
[root@slave1 /]$ mkfs.ext4 /dev/sda4 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 1310720 inodes, 5241540 blocks 262077 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 160 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 30 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
重新挂载，没有报错，mount成功，磁盘扩容成功
[root@slave1 /]$ mount /dev/sda4 /disk4
挂载前：
[root@slave1 /root]$ df -lh Filesystem Size Used Avail Use% Mounted on /dev/sda2 18G 3.0G 14G 18% / tmpfs 491M 72K 491M 1% /dev/shm /dev/sda1 291M 34M 242M 13% /boot
挂载后：
Filesystem Size Used Avail Use% Mounted on /dev/sda2 18G 3.1G 14G 19% / tmpfs 491M 72K 491M 1% /dev/shm /dev/sda1 291M 34M 242M 13% /boot /dev/sda4 20G 172M 19G 1% /disk4