mysql层的内存分配

参考 http://www.cnblogs.com/justfortaste/p/3198406.html

http://m.blog.csdn.net/blog/IT_PCode/17007833

http://blog.chinaunix.net/uid-28364803-id-3419777.html

http://blog.chinaunix.net/uid-26896862-id-3412033.html

mysql数据库分mysql层和存储引擎层,每个层都有各自的分配内存方法

mysql层分配内存方法比较简单

当一个请求过来后,使用一个线程为其服务,mysql层为它分配内存

mysql层mem_root

typedef struct st_used_mem
{                   /* struct for once_alloc (block) */
  struct st_used_mem *next;       /* Next block in use */
  unsigned int    left;           /* memory left in block  */
  unsigned int    size;           /* size of block */
} USED_MEM;

typedef struct st_mem_root
{
  USED_MEM *free;                  /* blocks with free memory in it */
  USED_MEM *used;                  /* blocks almost without free memory */
  USED_MEM *pre_alloc;             /* preallocated block */
  /* if block have less memory it will be put in 'used' list */
  size_t min_malloc;
  size_t block_size;               /* initial block size */
  unsigned int block_num;          /* allocated blocks counter */
  /* 
     first free block in queue test counter (if it exceed 
     MAX_BLOCK_USAGE_BEFORE_DROP block will be dropped in 'used' list)
  */
  unsigned int first_block_usage;

  void (*error_handler)(void);
} MEM_ROOT;

mysql内存池
mysql内部使用的内存管理程序，可以实现多次申请内存块, 中途任何时刻失败, 或者下次使用前释放内存, 无需再关心每次申请和释放了哪些内存.
工作原理：
初始化定义每次分配的最小内存块大小M，如果申请一次内存, 大小为X, X大于M, 就分配一块X的内存, 加入到管理链表中.如果小于的话, 看之前剩余的还够不够, 如果足够的话, 返回之前多余的内存地址.如果不够,则申请这么大的内存, 也计入链表中。
释放是一次性的，也可以不释放内存，而是标记已经使用的内存为“未使用”，下次同样的应用可以继续使用。
创建内存池
/*
 Initialize memory root

 SYNOPSIS
 init_alloc_root()
 mem_root       - memory root to initialize
 block_size     - size of chunks (blocks) used for memory allocation
 (It is external size of chunk i.e. it should include
 memory required for internal structures, thus it
 should be no less than ALLOC_ROOT_MIN_BLOCK_SIZE)
 pre_alloc_size - if non-0, then size of block that should be
 pre-allocated during memory root initialization.

 DESCRIPTION
 This function prepares memory root for further use, sets initial size of
 chunk for memory allocation and pre-allocates first block if specified.
 Altough error can happen during execution of this function if
 pre_alloc_size is non-0 it won't be reported. Instead it will be
 reported as error in first alloc_root() on this memory root.
 */

void init_alloc_root(MEM_ROOT *mem_root, uint block_size,
        uint pre_alloc_size __attribute__((unused))) {
    DBUG_ENTER("init_alloc_root");
    mem_root->free = mem_root->used = mem_root->pre_alloc = 0;
    mem_root->min_malloc = 32;
    mem_root->block_size = block_size - ALLOC_ROOT_MIN_BLOCK_SIZE;
    mem_root->error_handler = 0;
    mem_root->block_num = 4; /* We shift this with >>2 */
    mem_root->first_block_usage = 0;

    if (pre_alloc_size) {
        if ((mem_root->free = mem_root->pre_alloc = (USED_MEM*) my_malloc(
                pre_alloc_size + ALIGN_SIZE(sizeof(USED_MEM)),
                MYF(0))))
                {
                    mem_root->free->size= pre_alloc_size+ALIGN_SIZE(sizeof(USED_MEM));
      mem_root->free->left= pre_alloc_size;
      mem_root->free->next= 0;
    }
    }

    DBUG_VOID_RETURN;
}
申请内存
gptr alloc_root(MEM_ROOT *mem_root, unsigned int Size) {
    uint get_size, block_size;
    gptr point;
    reg1 USED_MEM *next = 0;
    reg2 USED_MEM **prev;
    DBUG_ENTER("alloc_root");DBUG_ASSERT(alloc_root_inited(mem_root));

    Size = ALIGN_SIZE(Size);
    if ((*(prev = &mem_root->free)) != NULL)
    {
        if ((*prev)->left < Size
                && mem_root->first_block_usage++
                        >= ALLOC_MAX_BLOCK_USAGE_BEFORE_DROP
                && (*prev)->left < ALLOC_MAX_BLOCK_TO_DROP)
                {
            next = *prev;
            *prev = next->next; /* Remove block from list */
            next->next = mem_root->used;
            mem_root->used = next;
            mem_root->first_block_usage = 0;
        }
        for (next = *prev; next && next->left < Size; next = next->next)
            prev = &next->next;
    }
    if (!next) { /* Time to alloc new block */
        block_size = mem_root->block_size * (mem_root->block_num >> 2);
        get_size = Size + ALIGN_SIZE(sizeof(USED_MEM));
        get_size = max(get_size, block_size);

        if (!(next = (USED_MEM*) my_malloc(get_size, MYF(MY_WME)))) {
            if (mem_root->error_handler)
                (*mem_root->error_handler)();
            return ((gptr) 0); /* purecov: inspected */
        }
        mem_root->block_num++;
        next->next = *prev;
        next->size = get_size;
        next->left = get_size - ALIGN_SIZE(sizeof(USED_MEM));
        *prev = next;
    }

    point = (gptr) ((char*) next + (next->size - next->left));
    /*TODO: next part may be unneded due to mem_root->first_block_usage counter*/
    if ((next->left -= Size) < mem_root->min_malloc) { /* Full block */
        *prev = next->next; /* Remove block from list */
        next->next = mem_root->used;
        mem_root->used = next;
        mem_root->first_block_usage = 0;
    }DBUG_RETURN(point);
}
释放内存
/*
 Deallocate everything used by alloc_root or just move
 used blocks to free list if called with MY_USED_TO_FREE

 SYNOPSIS
 free_root()
 root        Memory root
 MyFlags        Flags for what should be freed:

 MY_MARK_BLOCKS_FREED    Don't free blocks, just mark them free
 MY_KEEP_PREALLOC    If this is not set, then free also the
 preallocated block

 NOTES
 One can call this function either with root block initialised with
 init_alloc_root() or with a bzero()-ed block.
 It's also safe to call this multiple times with the same mem_root.
 */

void free_root(MEM_ROOT *root, myf MyFlags) {
    reg1 USED_MEM *next, *old;
    DBUG_ENTER("free_root");

    if (!root) /* QQ: Should be deleted */
        DBUG_VOID_RETURN; /* purecov: inspected */
    if (MyFlags & MY_MARK_BLOCKS_FREE)
    {
        mark_blocks_free(root);
        DBUG_VOID_RETURN;
    }
    if (!(MyFlags & MY_KEEP_PREALLOC))
        root->pre_alloc = 0;

    for (next = root->used; next;) {
        old = next;
        next = next->next;
        if (old != root->pre_alloc)
            my_free((gptr) old, MYF(0));
    }
    for (next = root->free; next;) {
        old = next;
        next = next->next;
        if (old != root->pre_alloc)
            my_free((gptr) old, MYF(0));
    }
    root->used = root->free = 0;
    if (root->pre_alloc) {
        root->free = root->pre_alloc;
        root->free->left = root->pre_alloc->size - ALIGN_SIZE(sizeof(USED_MEM));
        TRASH_MEM(root->pre_alloc);
        root->free->next = 0;
    }
    root->block_num = 4;
    root->first_block_usage = 0;
    DBUG_VOID_RETURN;
}
内存池使用实例
void test_myalloc() {
    MEM_ROOT root;
    char *str;
    init_alloc_root(&root, 1 << 12, 1 << 10);
    str = (char *) alloc_root(&root, 1024 * sizeof(double));
    if (NULL == str)
        printf("cannot get memory for alloc root for str
");
    strcpy(str, "hello
");
    puts(str);
    //mark free, can be used again
    free_root(&root, MY_MARK_BLOCKS_FREE);
    //free, can not be used
    free_root(&root, 0);
}

void my_free(void *ptr)
{
  DBUG_ENTER("my_free");
  DBUG_PRINT("my",("ptr: %p", ptr));
  free(ptr);
  DBUG_VOID_RETURN;
}