1 # 2 # This is the main Apache HTTP server configuration file. It contains the 3 # configuration directives that give the server its instructions. 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. 5 # In particular, see 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> 7 # for a discussion of each configuration directive. 8 # 9 # Do NOT simply read the instructions in here without understanding 10 # what they do. They're here only as hints or reminders. If you are unsure 11 # consult the online docs. You have been warned. 12 # 13 # Configuration and logfile names: If the filenames you specify for many 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the 15 # server will use that explicit path. If the filenames do *not* begin 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 19 # will be interpreted as '/logs/access_log'. 20 # 21 # NOTE: Where filenames are specified, you must use forward slashes 22 # instead of backslashes (e.g., "c:/apache" instead of "c:apache"). 23 # If a drive letter is omitted, the drive on which httpd.exe is located 24 # will be used by default. It is recommended that you always supply 25 # an explicit drive letter in absolute paths to avoid confusion. 26 27 # 28 # ServerRoot: The top of the directory tree under which the server's 29 # configuration, error, and log files are kept. 30 # 31 # Do not add a slash at the end of the directory path. If you point 32 # ServerRoot at a non-local disk, be sure to specify a local disk on the 33 # Mutex directive, if file-based mutexes are used. If you wish to share the 34 # same ServerRoot for multiple httpd daemons, you will need to change at 35 # least PidFile. 36 # 37 Define SRVROOT "c:/Apache24" 38 39 ServerRoot "${SRVROOT}" 40 41 # 42 # Mutex: Allows you to set the mutex mechanism and mutex file directory 43 # for individual mutexes, or change the global defaults 44 # 45 # Uncomment and change the directory if mutexes are file-based and the default 46 # mutex file directory is not on a local disk or is not appropriate for some 47 # other reason. 48 # 49 # Mutex default:logs 50 51 # 52 # Listen: Allows you to bind Apache to specific IP addresses and/or 53 # ports, instead of the default. See also the <VirtualHost> 54 # directive. 55 # 56 # Change this to Listen on specific IP addresses as shown below to 57 # prevent Apache from glomming onto all bound IP addresses. 58 # 59 #Listen 12.34.56.78:80 60 Listen 80 61 62 # 63 # Dynamic Shared Object (DSO) Support 64 # 65 # To be able to use the functionality of a module which was built as a DSO you 66 # have to place corresponding `LoadModule' lines at this location so the 67 # directives contained in it are actually available _before_ they are used. 68 # Statically compiled modules (those listed by `httpd -l') do not need 69 # to be loaded here. 70 # 71 # Example: 72 # LoadModule foo_module modules/mod_foo.so 73 # 74 #LoadModule access_compat_module modules/mod_access_compat.so 75 LoadModule actions_module modules/mod_actions.so 76 LoadModule alias_module modules/mod_alias.so 77 LoadModule allowmethods_module modules/mod_allowmethods.so 78 LoadModule asis_module modules/mod_asis.so 79 LoadModule auth_basic_module modules/mod_auth_basic.so 80 #LoadModule auth_digest_module modules/mod_auth_digest.so 81 #LoadModule auth_form_module modules/mod_auth_form.so 82 #LoadModule authn_anon_module modules/mod_authn_anon.so 83 LoadModule authn_core_module modules/mod_authn_core.so 84 #LoadModule authn_dbd_module modules/mod_authn_dbd.so 85 #LoadModule authn_dbm_module modules/mod_authn_dbm.so 86 LoadModule authn_file_module modules/mod_authn_file.so 87 #LoadModule authn_socache_module modules/mod_authn_socache.so 88 #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so 89 #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so 90 LoadModule authz_core_module modules/mod_authz_core.so 91 #LoadModule authz_dbd_module modules/mod_authz_dbd.so 92 #LoadModule authz_dbm_module modules/mod_authz_dbm.so 93 LoadModule authz_groupfile_module modules/mod_authz_groupfile.so 94 LoadModule authz_host_module modules/mod_authz_host.so 95 #LoadModule authz_owner_module modules/mod_authz_owner.so 96 LoadModule authz_user_module modules/mod_authz_user.so 97 LoadModule autoindex_module modules/mod_autoindex.so 98 #LoadModule brotli_module modules/mod_brotli.so 99 #LoadModule buffer_module modules/mod_buffer.so 100 #LoadModule cache_module modules/mod_cache.so 101 #LoadModule cache_disk_module modules/mod_cache_disk.so 102 #LoadModule cache_socache_module modules/mod_cache_socache.so 103 #LoadModule cern_meta_module modules/mod_cern_meta.so 104 LoadModule cgi_module modules/mod_cgi.so 105 #LoadModule charset_lite_module modules/mod_charset_lite.so 106 #LoadModule data_module modules/mod_data.so 107 #LoadModule dav_module modules/mod_dav.so 108 #LoadModule dav_fs_module modules/mod_dav_fs.so 109 #LoadModule dav_lock_module modules/mod_dav_lock.so 110 #LoadModule dbd_module modules/mod_dbd.so 111 #LoadModule deflate_module modules/mod_deflate.so 112 LoadModule dir_module modules/mod_dir.so 113 #LoadModule dumpio_module modules/mod_dumpio.so 114 LoadModule env_module modules/mod_env.so 115 #LoadModule expires_module modules/mod_expires.so 116 #LoadModule ext_filter_module modules/mod_ext_filter.so 117 #LoadModule file_cache_module modules/mod_file_cache.so 118 #LoadModule filter_module modules/mod_filter.so 119 #LoadModule http2_module modules/mod_http2.so 120 #LoadModule headers_module modules/mod_headers.so 121 #LoadModule heartbeat_module modules/mod_heartbeat.so 122 #LoadModule heartmonitor_module modules/mod_heartmonitor.so 123 #LoadModule ident_module modules/mod_ident.so 124 #LoadModule imagemap_module modules/mod_imagemap.so 125 LoadModule include_module modules/mod_include.so 126 #LoadModule info_module modules/mod_info.so 127 LoadModule isapi_module modules/mod_isapi.so 128 #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so 129 #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so 130 #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so 131 #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so 132 #LoadModule ldap_module modules/mod_ldap.so 133 #LoadModule logio_module modules/mod_logio.so 134 LoadModule log_config_module modules/mod_log_config.so 135 #LoadModule log_debug_module modules/mod_log_debug.so 136 #LoadModule log_forensic_module modules/mod_log_forensic.so 137 #LoadModule lua_module modules/mod_lua.so 138 #LoadModule macro_module modules/mod_macro.so 139 #LoadModule md_module modules/mod_md.so 140 LoadModule mime_module modules/mod_mime.so 141 #LoadModule mime_magic_module modules/mod_mime_magic.so 142 LoadModule negotiation_module modules/mod_negotiation.so 143 #LoadModule proxy_module modules/mod_proxy.so 144 #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so 145 #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so 146 #LoadModule proxy_connect_module modules/mod_proxy_connect.so 147 #LoadModule proxy_express_module modules/mod_proxy_express.so 148 #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so 149 #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so 150 #LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so 151 #LoadModule proxy_html_module modules/mod_proxy_html.so 152 #LoadModule proxy_http_module modules/mod_proxy_http.so 153 #LoadModule proxy_http2_module modules/mod_proxy_http2.so 154 #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so 155 #LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so 156 #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so 157 #LoadModule ratelimit_module modules/mod_ratelimit.so 158 #LoadModule reflector_module modules/mod_reflector.so 159 #LoadModule remoteip_module modules/mod_remoteip.so 160 #LoadModule request_module modules/mod_request.so 161 #LoadModule reqtimeout_module modules/mod_reqtimeout.so 162 #LoadModule rewrite_module modules/mod_rewrite.so 163 #LoadModule sed_module modules/mod_sed.so 164 #LoadModule session_module modules/mod_session.so 165 #LoadModule session_cookie_module modules/mod_session_cookie.so 166 #LoadModule session_crypto_module modules/mod_session_crypto.so 167 #LoadModule session_dbd_module modules/mod_session_dbd.so 168 LoadModule setenvif_module modules/mod_setenvif.so 169 #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so 170 #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so 171 #LoadModule socache_dbm_module modules/mod_socache_dbm.so 172 #LoadModule socache_memcache_module modules/mod_socache_memcache.so 173 #LoadModule socache_redis_module modules/mod_socache_redis.so 174 #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so 175 #LoadModule speling_module modules/mod_speling.so 176 #LoadModule ssl_module modules/mod_ssl.so 177 #LoadModule status_module modules/mod_status.so 178 #LoadModule substitute_module modules/mod_substitute.so 179 #LoadModule unique_id_module modules/mod_unique_id.so 180 #LoadModule userdir_module modules/mod_userdir.so 181 #LoadModule usertrack_module modules/mod_usertrack.so 182 #LoadModule version_module modules/mod_version.so 183 #LoadModule vhost_alias_module modules/mod_vhost_alias.so 184 #LoadModule watchdog_module modules/mod_watchdog.so 185 #LoadModule xml2enc_module modules/mod_xml2enc.so 186 LoadModule php_module "C:PHP8php8apache2_4.dll" 187 PHPIniDir "C:PHP8" 188 189 <IfModule unixd_module> 190 # 191 # If you wish httpd to run as a different user or group, you must run 192 # httpd as root initially and it will switch. 193 # 194 # User/Group: The name (or #number) of the user/group to run httpd as. 195 # It is usually good practice to create a dedicated user and group for 196 # running httpd, as with most system services. 197 # 198 User daemon 199 Group daemon 200 201 </IfModule> 202 203 # 'Main' server configuration 204 # 205 # The directives in this section set up the values used by the 'main' 206 # server, which responds to any requests that aren't handled by a 207 # <VirtualHost> definition. These values also provide defaults for 208 # any <VirtualHost> containers you may define later in the file. 209 # 210 # All of these directives may appear inside <VirtualHost> containers, 211 # in which case these default settings will be overridden for the 212 # virtual host being defined. 213 # 214 215 # 216 # ServerAdmin: Your address, where problems with the server should be 217 # e-mailed. This address appears on some server-generated pages, such 218 # as error documents. e.g. admin@your-domain.com 219 # 220 ServerAdmin admin@example.com 221 222 # 223 # ServerName gives the name and port that the server uses to identify itself. 224 # This can often be determined automatically, but we recommend you specify 225 # it explicitly to prevent problems during startup. 226 # 227 # If your host doesn't have a registered DNS name, enter its IP address here. 228 # 229 #ServerName www.example.com:80 230 ServerName localhost:80 231 232 # 233 # Deny access to the entirety of your server's filesystem. You must 234 # explicitly permit access to web content directories in other 235 # <Directory> blocks below. 236 # 237 <Directory /> 238 AllowOverride none 239 Require all denied 240 </Directory> 241 242 # 243 # Note that from this point forward you must specifically allow 244 # particular features to be enabled - so if something's not working as 245 # you might expect, make sure that you have specifically enabled it 246 # below. 247 # 248 249 # 250 # DocumentRoot: The directory out of which you will serve your 251 # documents. By default, all requests are taken from this directory, but 252 # symbolic links and aliases may be used to point to other locations. 253 # 254 DocumentRoot "${SRVROOT}/htdocs" 255 <Directory "${SRVROOT}/htdocs"> 256 # 257 # Possible values for the Options directive are "None", "All", 258 # or any combination of: 259 # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews 260 # 261 # Note that "MultiViews" must be named *explicitly* --- "Options All" 262 # doesn't give it to you. 263 # 264 # The Options directive is both complicated and important. Please see 265 # http://httpd.apache.org/docs/2.4/mod/core.html#options 266 # for more information. 267 # 268 Options Indexes FollowSymLinks 269 270 # 271 # AllowOverride controls what directives may be placed in .htaccess files. 272 # It can be "All", "None", or any combination of the keywords: 273 # AllowOverride FileInfo AuthConfig Limit 274 # 275 AllowOverride None 276 277 # 278 # Controls who can get stuff from this server. 279 # 280 Require all granted 281 </Directory> 282 283 # 284 # DirectoryIndex: sets the file that Apache will serve if a directory 285 # is requested. 286 # 287 <IfModule dir_module> 288 DirectoryIndex index.php index.html#优先加载PHP 289 </IfModule> 290 291 # 292 # The following lines prevent .htaccess and .htpasswd files from being 293 # viewed by Web clients. 294 # 295 <Files ".ht*"> 296 Require all denied 297 </Files> 298 299 # 300 # ErrorLog: The location of the error log file. 301 # If you do not specify an ErrorLog directive within a <VirtualHost> 302 # container, error messages relating to that virtual host will be 303 # logged here. If you *do* define an error logfile for a <VirtualHost> 304 # container, that host's errors will be logged there and not here. 305 # 306 ErrorLog "logs/error.log" 307 308 # 309 # LogLevel: Control the number of messages logged to the error_log. 310 # Possible values include: debug, info, notice, warn, error, crit, 311 # alert, emerg. 312 # 313 LogLevel warn 314 315 <IfModule log_config_module> 316 # 317 # The following directives define some format nicknames for use with 318 # a CustomLog directive (see below). 319 # 320 LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined 321 LogFormat "%h %l %u %t "%r" %>s %b" common 322 323 <IfModule logio_module> 324 # You need to enable mod_logio.c to use %I and %O 325 LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio 326 </IfModule> 327 328 # 329 # The location and format of the access logfile (Common Logfile Format). 330 # If you do not define any access logfiles within a <VirtualHost> 331 # container, they will be logged here. Contrariwise, if you *do* 332 # define per-<VirtualHost> access logfiles, transactions will be 333 # logged therein and *not* in this file. 334 # 335 CustomLog "logs/access.log" common 336 337 # 338 # If you prefer a logfile with access, agent, and referer information 339 # (Combined Logfile Format) you can use the following directive. 340 # 341 #CustomLog "logs/access.log" combined 342 </IfModule> 343 344 <IfModule alias_module> 345 # 346 # Redirect: Allows you to tell clients about documents that used to 347 # exist in your server's namespace, but do not anymore. The client 348 # will make a new request for the document at its new location. 349 # Example: 350 # Redirect permanent /foo http://www.example.com/bar 351 352 # 353 # Alias: Maps web paths into filesystem paths and is used to 354 # access content that does not live under the DocumentRoot. 355 # Example: 356 # Alias /webpath /full/filesystem/path 357 # 358 # If you include a trailing / on /webpath then the server will 359 # require it to be present in the URL. You will also likely 360 # need to provide a <Directory> section to allow access to 361 # the filesystem path. 362 363 # 364 # ScriptAlias: This controls which directories contain server scripts. 365 # ScriptAliases are essentially the same as Aliases, except that 366 # documents in the target directory are treated as applications and 367 # run by the server when requested rather than as documents sent to the 368 # client. The same rules about trailing "/" apply to ScriptAlias 369 # directives as to Alias. 370 # 371 ScriptAlias /cgi-bin/ "${SRVROOT}/cgi-bin/" 372 373 </IfModule> 374 375 <IfModule cgid_module> 376 # 377 # ScriptSock: On threaded servers, designate the path to the UNIX 378 # socket used to communicate with the CGI daemon of mod_cgid. 379 # 380 #Scriptsock cgisock 381 </IfModule> 382 383 # 384 # "${SRVROOT}/cgi-bin" should be changed to whatever your ScriptAliased 385 # CGI directory exists, if you have that configured. 386 # 387 <Directory "${SRVROOT}/cgi-bin"> 388 AllowOverride None 389 Options None 390 Require all granted 391 </Directory> 392 393 <IfModule headers_module> 394 # 395 # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied 396 # backend servers which have lingering "httpoxy" defects. 397 # 'Proxy' request header is undefined by the IETF, not listed by IANA 398 # 399 RequestHeader unset Proxy early 400 </IfModule> 401 402 <IfModule mime_module> 403 # 404 # TypesConfig points to the file containing the list of mappings from 405 # filename extension to MIME-type. 406 # 407 TypesConfig conf/mime.types 408 409 # 410 # AddType allows you to add to or override the MIME configuration 411 # file specified in TypesConfig for specific file types. 412 # 413 #AddType application/x-gzip .tgz 414 # 415 # AddEncoding allows you to have certain browsers uncompress 416 # information on the fly. Note: Not all browsers support this. 417 # 418 #AddEncoding x-compress .Z 419 #AddEncoding x-gzip .gz .tgz 420 # 421 # If the AddEncoding directives above are commented-out, then you 422 # probably should define those extensions to indicate media types: 423 # 424 AddType application/x-compress .Z 425 AddType application/x-gzip .gz .tgz 426 427 # 428 # AddHandler allows you to map certain file extensions to "handlers": 429 # actions unrelated to filetype. These can be either built into the server 430 # or added with the Action directive (see below) 431 # 432 # To use CGI scripts outside of ScriptAliased directories: 433 # (You will also need to add "ExecCGI" to the "Options" directive.) 434 # 435 #AddHandler cgi-script .cgi 436 437 # For type maps (negotiated resources): 438 #AddHandler type-map var 439 440 # 441 # Filters allow you to process content before it is sent to the client. 442 # 443 # To parse .shtml files for server-side includes (SSI): 444 # (You will also need to add "Includes" to the "Options" directive.) 445 # 446 #AddType text/html .shtml 447 #AddOutputFilter INCLUDES .shtml 448 AddType application/x-httpd-php .php 449 AddAddHandler application/x-httpd-php .php 450 </IfModule> 451 452 # 453 # The mod_mime_magic module allows the server to use various hints from the 454 # contents of the file itself to determine its type. The MIMEMagicFile 455 # directive tells the module where the hint definitions are located. 456 # 457 #MIMEMagicFile conf/magic 458 459 # 460 # Customizable error responses come in three flavors: 461 # 1) plain text 2) local redirects 3) external redirects 462 # 463 # Some examples: 464 #ErrorDocument 500 "The server made a boo boo." 465 #ErrorDocument 404 /missing.html 466 #ErrorDocument 404 "/cgi-bin/missing_handler.pl" 467 #ErrorDocument 402 http://www.example.com/subscription_info.html 468 # 469 470 # 471 # MaxRanges: Maximum number of Ranges in a request before 472 # returning the entire resource, or one of the special 473 # values 'default', 'none' or 'unlimited'. 474 # Default setting is to accept 200 Ranges. 475 #MaxRanges unlimited 476 477 # 478 # EnableMMAP and EnableSendfile: On systems that support it, 479 # memory-mapping or the sendfile syscall may be used to deliver 480 # files. This usually improves server performance, but must 481 # be turned off when serving from networked-mounted 482 # filesystems or if support for these functions is otherwise 483 # broken on your system. 484 # Defaults: EnableMMAP On, EnableSendfile Off 485 # 486 #EnableMMAP off 487 #EnableSendfile on 488 489 # Supplemental configuration 490 # 491 # The configuration files in the conf/extra/ directory can be 492 # included to add extra features or to modify the default configuration of 493 # the server, or you may simply copy their contents here and change as 494 # necessary. 495 496 # Server-pool management (MPM specific) 497 #Include conf/extra/httpd-mpm.conf 498 499 # Multi-language error messages 500 #Include conf/extra/httpd-multilang-errordoc.conf 501 502 # Fancy directory listings 503 #Include conf/extra/httpd-autoindex.conf 504 505 # Language settings 506 #Include conf/extra/httpd-languages.conf 507 508 # User home directories 509 #Include conf/extra/httpd-userdir.conf 510 511 # Real-time info on requests and configuration 512 #Include conf/extra/httpd-info.conf 513 514 # Virtual hosts 515 #Include conf/extra/httpd-vhosts.conf 516 517 # Local access to the Apache HTTP Server Manual 518 #Include conf/extra/httpd-manual.conf 519 520 # Distributed authoring and versioning (WebDAV) 521 #Include conf/extra/httpd-dav.conf 522 523 # Various default settings 524 #Include conf/extra/httpd-default.conf 525 526 # Configure mod_proxy_html to understand HTML4/XHTML1 527 <IfModule proxy_html_module> 528 Include conf/extra/proxy-html.conf 529 </IfModule> 530 531 # Secure (SSL/TLS) connections 532 #Include conf/extra/httpd-ssl.conf 533 # 534 # Note: The following must must be present to support 535 # starting without SSL on platforms with no /dev/random equivalent 536 # but a statically compiled-in mod_ssl. 537 # 538 <IfModule ssl_module> 539 SSLRandomSeed startup builtin 540 SSLRandomSeed connect builtin 541 </IfModule>