H.264远程视频监控系统

由usb摄像头驱动,h264编码库,采集read_video,传输,客户端显示组成
读取摄像头数据缓冲区是否有帧数据收到，有数据收到就读取数据并进行H264编码，把数据发送到socket发送到客户端。
配置内核:make menuconfig ARCH=arm, 选择gerneral setup-->multimedia devices-->device drivers-->multimedia devices-->video capture adapters-->V4L USB devices-->USB OV511 camera support
编译内核：make uImage ARCH=arm
CROSS_COMPILE=arm-linux-
将uImage拷贝到tftpboot目录下
编译t264
编译server_arm
挂载文件系统
连接usb摄像头, 节点自动创建起来，ls -l /dev/video0, mknod /dev/video0 c 81 0
在ARM上运行视频采集和发送程序./server_arm fastspeed.txt
在PC端打开客户端LinuxClient.exe, 看到视频信息。

主要程序充server_arm.c
/* 服务端程序 server.c */ 
//WB
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <stdlib.h>
#include <linux/types.h>
#include <linux/videodev.h>
#include <setjmp.h>
#include <string.h>
#include <signal.h>
#include <errno.h>
#include <sys/socket.h> 
#include <netinet/in.h>
#include "convert.h"

#include "../avc-src-0.14/avc/common/T264.h"

#define SERVER_PORT 8888 
 
T264_t* m_t264;
T264_param_t m_param;
char* m_pSrc;
char* m_pDst;
int* m_lDstSize;
char* m_pPoolData;


#define USB_VIDEO "/dev/video0"
int cam_fd;
struct video_mmap cam_mm;/*视频内存映射*/
/*包含摄像头的基本信息，例如设备名称、
支持的最大最小分辨率、信号源信息等*/
struct video_capability cam_cap;
/*亮度、对比度等和voide_mmap中的分辨率*/
struct video_picture cam_pic;
struct video_mbuf cam_mbuf;/*摄像头存储缓冲区的帧信息*/
struct video_window win;/* 设备采集窗口参数*/
char *cam_data = NULL;
int nframe;

void read_video(char *pixels,int w, int h)
{
  int ret;
  int frame=0; 
  cam_mm.width = w;
  cam_mm.height = h;
 /* 对于单帧采集只需设置 frame=0*/
  cam_mm.frame = 0;
  cam_mm.format=VIDEO_PALETTE_YUV420P; //change by 091215
/*  若调用成功，则激活设备真正开始一帧图像的截取，是非阻塞的*/
  ret = ioctl(cam_fd,VIDIOCMCAPTURE,&cam_mm);
  if( ret<0 ) {
    printf("ERROR: VIDIOCMCAPTURE
");
  }
/*  函数判断该帧图像是否截取完毕，成功返回表示截取完毕*/
  ret = ioctl(cam_fd,VIDIOCSYNC,&frame);
  if( ret<0 ) {
    printf("ERROR: VIDIOCSYNC
");
  }
}

void config_vid_pic()
{
  char cfpath[100];
  FILE *cf;
  int ret;
  if (ioctl(cam_fd, VIDIOCGPICT, &cam_pic) < 0) {
    printf("ERROR:VIDIOCGPICT
");
  }
  /*图像采集格式,网眼V2000只支持VIDEO_PALETTE_YUV420P*/
  cam_pic.palette = VIDEO_PALETTE_YUV420P; //change by 091215

#if 0
    cam_pic.brightness  = 30464;
    cam_pic.hue = 36000;
    cam_pic.colour = 0;
    cam_pic.contrast = 43312;
    cam_pic.whiteness = 10312;
    cam_pic.depth =         24;
#endif
    cam_pic.brightness  =    30464;
    cam_pic.hue =        111;
    cam_pic.colour =        555;
    cam_pic.contrast =        43312;
    cam_pic.whiteness =        111;
    /*VIDEO_PALETTE_YUV420,bpp=12bit*/
    cam_pic.depth =         12; //bpp == bytes per pixel,change by 091215
    /*设置摄像头缓冲中voideo_picture信息*/
    ret = ioctl( cam_fd, VIDIOCSPICT,&cam_pic );      

    if( ret<0 ) {
      close(cam_fd);
      printf("ERROR: VIDIOCSPICT,Can't set video_picture format
");
    }
    return;
}


void init_video(int w,int h) /* bpp == bytes per pixel*/
{
  int ret;
  
  /*设备的打开*/
  cam_fd = open( USB_VIDEO, O_RDWR );
  if( cam_fd<0 )
    printf("Can't open video device
");
    /* 使用IOCTL命令VIDIOCGCAP，获取摄像头的基本信息，如最大，最小分辨率*/
  
  ret = ioctl( cam_fd,VIDIOCGCAP,&cam_cap );       /* 摄像头的基本信息*/
  if( ret<0 ) {
    printf("Can't get device information: VIDIOCGCAP
");
  }
  printf("Device name:%s
Width:%d ~ %d
Height:%d ~ %d
",cam_cap.name, cam_cap.maxwidth, cam_cap.minwidth, cam_cap.maxheight, cam_cap.minheight);
  if( ioctl(cam_fd,VIDIOCGWIN,&win)<0 ) {
    printf("ERROR:VIDIOCGWIN
");
  }
  win.x = 0;  //windows中的原点坐标
  win.y = 0;  //windows中的原点坐标
  win.width=w; //capture area 宽度
  win.height=h; //capture area 高度
  
  /*使用IOCTL命令VIDIOCSWIN，设置摄像头的基本信息*/
  if (ioctl(cam_fd, VIDIOCSWIN, &win) < 0) {
    printf("ERROR:VIDIOCSWIN
");
  }
  
  /*设置摄像头voideo_picture信息*/
  config_vid_pic();  
  
   /*使用IOCTL命令VIDIOCGCAP，获取获得摄像头存储缓冲区的帧信息*/
  ret = ioctl(cam_fd,VIDIOCGMBUF,&cam_mbuf);
  if( ret<0 ) {
    printf("ERROR:VIDIOCGMBUF,Can't get video_mbuf
");
  }
  printf("Frames:%d
",cam_mbuf.frames);
  nframe = cam_mbuf.frames;
  
  /*接着把摄像头对应的设备文件映射到内存区*/
  cam_data = (char*)mmap(0, cam_mbuf.size, PROT_READ|PROT_WRITE,MAP_SHARED,cam_fd,0); 
  if( cam_data == MAP_FAILED ) {
    printf("ERROR:mmap
");
  }
  printf("Buffer size:%d
Offset:%d
",cam_mbuf.size,cam_mbuf.offsets[0]);
  InitLookupTable();
  
}


void init_param(T264_param_t* param, const char* file)
{
    int total_no;
    FILE* fd; 
    char line[255];
    int32_t b;
    if (!(fd = fopen(file,"r")))
    {
        printf("Couldn't open parameter file %s.
", file);
        exit(-1);
    }

    memset(param, 0, sizeof(*param));
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    if (b != 4)
    {
        printf("wrong param file version, expect v4.0
");
        exit(-1);
    }
    fgets(line, 254, fd); sscanf(line,"%d", &param->width);
    fgets(line, 254, fd); sscanf(line,"%d", &param->height);
    fgets(line, 254, fd); sscanf(line,"%d", &param->search_x);
    fgets(line, 254, fd); sscanf(line,"%d", &param->search_y);
    fgets(line, 254, fd); sscanf(line,"%d", &total_no);
    fgets(line, 254, fd); sscanf(line,"%d", &param->iframe);
    fgets(line, 254, fd); sscanf(line,"%d", &param->idrframe);
    fgets(line, 254, fd); sscanf(line,"%d", &param->b_num);
    fgets(line, 254, fd); sscanf(line,"%d", &param->ref_num);
    fgets(line, 254, fd); sscanf(line,"%d", &param->enable_rc);
    fgets(line, 254, fd); sscanf(line,"%d", &param->bitrate);
    fgets(line, 254, fd); sscanf(line,"%f", &param->framerate);
    fgets(line, 254, fd); sscanf(line,"%d", &param->qp);
    fgets(line, 254, fd); sscanf(line,"%d", &param->min_qp);
    fgets(line, 254, fd); sscanf(line,"%d", &param->max_qp);
    fgets(line, 254, fd); sscanf(line,"%d", &param->enable_stat);
    fgets(line, 254, fd); sscanf(line,"%d", &param->disable_filter);
    fgets(line, 254, fd); sscanf(line,"%d", &param->aspect_ratio);
    fgets(line, 254, fd); sscanf(line,"%d", &param->video_format);
    fgets(line, 254, fd); sscanf(line,"%d", &param->luma_coeff_cost);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_INTRA16x16) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_INTRA4x4) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_INTRAININTER) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_HALFPEL) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_QUARTPEL) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_SUBBLOCK) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_FULLSEARCH) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_DIAMONDSEACH) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_FORCEBLOCKSIZE) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_FASTINTERPOLATE) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_SAD) * b;
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_EXTRASUBPELSEARCH) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->flags |= (USE_SCENEDETECT) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_16x16P) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_16x8P) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_8x16P) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_8x8P) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_8x4P) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_4x8P) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_4x4P) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_16x16B) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_16x8B) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_8x16B) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &b);
    param->block_size |= (SEARCH_8x8B) * (!!b);
    fgets(line, 254, fd); sscanf(line,"%d", &param->cpu);
    fgets(line, 254, fd); sscanf(line, "%d", &param->cabac);

    //     fgets(line, 254, fd); sscanf(line,"%s", src_path);
    //     fgets(line, 254, fd); sscanf(line,"%s", out_path);
    //     fgets(line, 254, fd); sscanf(line,"%s", rec_path);
    //     param->rec_name = rec_path;

    fclose(fd);
}


void init_encoder()
{
    //编码准备
    const char* paramfile = "fastspeed.txt";
    /*获取fastspeed.txt文件信息*/
    init_param(&m_param, paramfile);
    m_param.direct_flag = 1;
    /*t264编码的打开*/
    m_t264 = T264_open(&m_param);
    m_lDstSize  = m_param.height * m_param.width + (m_param.height * m_param.width >> 1);
      /*分配t264解码后数据存放的内存*/
    m_pDst = (uint8_t*)T264_malloc(m_lDstSize, CACHE_SIZE);
    
    /*分配内存用于存放一帧数据长度的数据*/
    m_pPoolData = malloc(m_param.width*m_param.height*3/2); 
}
    
void udps_respon(int sockfd,int w,int h) 
{ 
    struct sockaddr_in addrsrc;
    struct sockaddr_in addrdst; 
    int addrlen,n; 
    
    int32_t iActualLen;
    int row_stride = w*3*h/2;

    bzero(&addrdst,sizeof(struct sockaddr_in)); 
    addrdst.sin_family=AF_INET; 
    /*客户端PC机IP地址*/
    addrdst.sin_addr.s_addr=inet_addr("172.18.23.26");
    addrdst.sin_port=htons(SERVER_PORT);

    while(1) 
    { 
        /*数据的采集*/
        read_video(NULL,w,h);
        /*对采集到的数据通过H264编码*/
        iActualLen = T264_encode(m_t264, cam_data, m_pDst, row_stride);
        printf("encoded:%d, %d bytes.
",row_stride,iActualLen); 
        /*frame_num：存放帧号*/
        memcpy(m_pPoolData,&m_t264->frame_num,1);
        /*m_pDst解码后的数据*/
        memcpy(m_pPoolData+1, m_pDst, iActualLen);
        iActualLen++;
        /*使用UDP协议发送编码后的数据到客服端*/
        sendto(sockfd,m_pPoolData,iActualLen,0,(struct sockaddr*)&addrdst,sizeof(struct sockaddr_in));     
    } 
} 


void free_dev()
{
  printf("free device
");
  close(cam_fd);
}

/*主函数入口*/
int main(void) 
{     
    int sockfd; 
    struct sockaddr_in addr;

    printf("start 2.0...
"); 

/*创建套接字*/
    sockfd=socket(AF_INET,SOCK_DGRAM,0); 

    if(sockfd<0) 
    {
        printf("0-");
        printf("Socket Error
"); 
        exit(1); 
    } 

    bzero(&addr,sizeof(struct sockaddr_in)); 
    addr.sin_family=AF_INET; 
    addr.sin_addr.s_addr=htonl(INADDR_ANY); 
    addr.sin_port=htons(SERVER_PORT); 
    /*套接字绑定*/
    if(bind(sockfd,(struct sockaddr *)&addr,sizeof(struct sockaddr_in))<0 ) 
    { 
        printf(stderr,"Bind Error:%s
",strerror(errno)); 
        exit(1); 
    } 

    /*该函数完成编码前的准备*/
    init_encoder();

    atexit( &free_dev );
    /*采集数据前的初始化函数*/
    init_video(m_param.width,m_param.height);

    /*使用UDP协议发送采集到的数据*/
    udps_respon(sockfd,m_param.width,m_param.height); 
    
    close(sockfd); 

}