https://blog.51cto.com/devingeng/2096495
环境描述：
采用CentOS7.4 minimual，docker 17.03.2-ce，kubeadm 1.10.0，etcd 3.0， k8s 1.10.0
我们这里选用三个节点搭建一个实验环境。
172.16.3.13 smaster
172.16.3.14 snode1
准备环境：
1.配置好各节点hosts文件
vi /etc/hosts
172.16.3.13 smaster
172.16.3.14 snode1
2.关闭各节点系统防火墙
systemctl stop firewalld
systemctl disable firewalld
3.关闭各节点SElinux
cat /etc/selinux/config
SELINUX=disabled
4.关闭各节点swap
swapoff -a
vi /etc/fstab
#/dev/mapper/centos-swap swap swap defaults 0 0
5.配置各节点系统内核参数使流过网桥的流量也进入iptables/netfilter框架中，在/etc/sysctl.conf中添加以下配置：
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
sysctl -p
6. cd /etc/systemd/system
[root@node01 system]# cat k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
vm.swappiness = 0
7.cd /etc/systemd/system/kubelet.service.d
vi 10-kubeadm.conf
Environment="KUBELET_CGROUP_ARGS=--cgroup-driver=cgroupfs"
Environment="KUBELET_EXTRA_ARGS=--fail-swap-on=false"
master node01节点安装 相同版本的docker docker 17.03.2-ce
使用kubeadm安装：
1.首先配置各节点阿里K8S YUM源
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
EOF
yum -y install epel-release
yum clean all
yum makecache
2.在各节点安装kubeadm和相关工具包
yum -y install docker 17.03.2-ce kubelet-1.10.0-0 kubeadm-1.10.0-0 kubectl-1.10.0-0 kubernetes-cni
3.启动Docker与kubelet服务
systemctl enable docker && systemctl start docker
systemctl enable kubelet && systemctl start kubelet
提示：此时kubelet的服务运行状态是异常的，因为缺少主配置文件kubelet.conf。但可以暂不处理，因为在完成Master节点的初始化后才会生成这个配置文件。
4.下载K8S相关镜像（Master节点操作）
因为无法直接访问gcr.io下载镜像，所以需要配置一个国内的容器镜像加速器
配置一个阿里云的加速器：
登录 https://cr.console.aliyun.com/
在页面中找到并点击镜像加速按钮，即可看到属于自己的专属加速链接，选择Centos版本后即可看到配置方法。
提示：在阿里云上使用 Docker 并配置阿里云镜像加速器，可能会遇到 daemon.json 导致 docker daemon 无法启动的问题，可以通过以下方法解决。
你需要的是编辑
vim /etc/sysconfig/docker
然后
OPTIONS='--selinux-enabled --log-driver=journald --registry-mirror=http://xxxx.mirror.aliyuncs.com'
registry-mirror 输入你的镜像地址
最后 service docker restart 重启 daemon
然后 ps aux | grep docker 然后你就会发现带有镜像的启动参数了。
5.下载K8S相关镜像
OK，解决完加速器的问题之后，开始下载k8s相关镜像，下载后将镜像名改为k8s.gcr.io/开头的名字，以便kubeadm识别使用。
#!/bin/bash
images=(kube-proxy-amd64:v1.10.0 kube-scheduler-amd64:v1.10.0 kube-controller-manager-amd64:v1.10.0 kube-apiserver-amd64:v1.10.0
etcd-amd64:3.1.12 pause-amd64:3.1 kubernetes-dashboard-amd64:v1.8.3 k8s-dns-sidecar-amd64:1.14.8 k8s-dns-kube-dns-amd64:1.14.8
k8s-dns-dnsmasq-nanny-amd64:1.14.8)
for imageName in ${images[@]} ; do
docker pull keveon/$imageName
docker tag keveon/$imageName k8s.gcr.io/$imageName
docker rmi keveon/$imageName
done
上面的shell脚本主要做了3件事，下载各种需要用到的容器镜像、重新打标记为符合k8s命令规范的版本名称、清除旧的容器镜像。
提示：镜像版本一定要和kubeadm安装的版本一致，否则会出现time out问题。
6.初始化安装K8S Master
执行上述shell脚本，等待下载完成后，执行kubeadm init
[root@k8smaster ~]# kubeadm init --kubernetes-version=v1.10.0 --pod-network-cidr=10.244.0.0/16
[init] Using Kubernetes version: v1.10.0
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks.
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
[WARNING FileExisting-crictl]: crictl not found in system path
Suggestion: go get github.com/kubernetes-incubator/cri-tools/cmd/crictl
[preflight] Starting the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [k8smaster kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.100.202]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated etcd/ca certificate and key.
[certificates] Generated etcd/server certificate and key.
[certificates] etcd/server serving cert is signed for DNS names [localhost] and IPs [127.0.0.1]
[certificates] Generated etcd/peer certificate and key.
[certificates] etcd/peer serving cert is signed for DNS names [k8smaster] and IPs [10.0.100.202]
[certificates] Generated etcd/healthcheck-client certificate and key.
[certificates] Generated apiserver-etcd-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests".
[init] This might take a minute or longer if the control plane images have to be pulled.
[apiclient] All control plane components are healthy after 21.001790 seconds
[uploadconfig] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[markmaster] Will mark node k8smaster as master by adding a label and a taint
[markmaster] Master k8smaster tainted and labelled with key/value: node-role.kubernetes.io/master=""
[bootstraptoken] Using token: thczis.64adx0imeuhu23xv
[bootstraptoken] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: kube-dns
[addons] Applied essential addon: kube-proxy
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of machines by running the following on each node
as root:
kubeadm join 10.0.100.202:6443 --token thczis.64adx0imeuhu23xv --discovery-token-ca-cert-hash sha256:fa7b11bb569493fd44554aab0afe55a4c051cccc492dbdfafae6efeb6ffa80e6
提示：选项--kubernetes-version=v1.10.0是必须的，否则会因为访问google网站被墙而无法执行命令。这里使用v1.10.0版本，刚才前面也说到了下载的容器镜像版本必须与K8S版本一致否则会出现time out。
上面的命令大约需要1分钟的过程，期间可以观察下tail -f /var/log/message日志文件的输出，掌握该配置过程和进度。上面最后一段的输出信息保存一份，后续添加工作节点还要用到。
7.配置kubectl认证信息（Master节点操作）
# 对于非root用户
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
# 对于root用户
export KUBECONFIG=/etc/kubernetes/admin.conf
也可以直接放到~/.bash_profile
echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> ~/.bash_profile
8.安装flannel网络（Master节点操作）
mkdir -p /etc/cni/net.d/
cat <<EOF> /etc/cni/net.d/10-flannel.conf
{
“name”: “cbr0”,
“type”: “flannel”,
“delegate”: {
“isDefaultGateway”: true
}
}
EOF
mkdir /usr/share/oci-umount/oci-umount.d -p
mkdir /run/flannel/
cat <<EOF> /run/flannel/subnet.env
FLANNEL_NETWORK=10.244.0.0/16
FLANNEL_SUBNET=10.244.1.0/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=true
EOF
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/v0.9.1/Documentation/kube-flannel.yml
9.让node1、node2加入集群
在node1和node2节点上分别执行kubeadm join命令，加入集群：
[root@k8snode1 ~]# kubeadm join 10.0.100.202:6443 --token thczis.64adx0imeuhu23xv --discovery-token-ca-cert-hash sha256:fa7b11bb569493fd44554aab0afe55a4c051cccc492dbdfafae6efeb6ffa80e6
[preflight] Running pre-flight checks.
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
[WARNING FileExisting-crictl]: crictl not found in system path
Suggestion: go get github.com/kubernetes-incubator/cri-tools/cmd/crictl
[discovery] Trying to connect to API Server "10.0.100.202:6443"
[discovery] Created cluster-info discovery client, requesting info from "https://10.0.100.202:6443"
[discovery] Requesting info from "https://10.0.100.202:6443" again to validate TLS against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate validates against pinned roots, will use API Server "10.0.100.202:6443"
[discovery] Successfully established connection with API Server "10.0.100.202:6443"
This node has joined the cluster:
* Certificate signing request was sent to master and a response
was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the master to see this node join the cluster.
提示：细心的童鞋应该会发现，这段命令其实就是前面K8S Matser安装成功后我让你们保存的那段命令。
默认情况下，Master节点不参与工作负载，但如果希望安装出一个All-In-One的k8s环境，则可以执行以下命令，让Master节点也成为一个Node节点：
kubectl taint nodes --all node-role.kubernetes.io/master-
node01节点 安装flannle
安装flannel网络（node01节点操作）
mkdir -p /etc/cni/net.d/
cat <<EOF> /etc/cni/net.d/10-flannel.conf
{
“name”: “cbr0”,
“type”: “flannel”,
“delegate”: {
“isDefaultGateway”: true
}
}
EOF
mkdir /usr/share/oci-umount/oci-umount.d -p
mkdir /run/flannel/
cat <<EOF> /run/flannel/subnet.env
FLANNEL_NETWORK=10.244.0.0/16
FLANNEL_SUBNET=10.244.1.0/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=true
EOF
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/v0.9.1/Documentation/kube-flannel.yml
10.验证K8S Master是否搭建成功（Master节点操作）
# 查看节点状态
kubectl get nodes
# 查看pods状态
kubectl get pods --all-namespaces
# 查看K8S集群状态
kubectl get cs
常见错误解析
安装时候最常见的就是time out，因为K8S镜像在国外，所以我们在前面就说到了提前把他下载下来，可以用一个国外机器采用habor搭建一个私有仓库把镜像都download下来。
[root@k8smaster ~]# kubeadm init
[init] Using Kubernetes version: v1.10.0
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks.
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
[WARNING FileExisting-crictl]: crictl not found in system path
Suggestion: go get github.com/kubernetes-incubator/cri-tools/cmd/crictl
[preflight] Starting the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [k8smaster kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.100.202]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated etcd/ca certificate and key.
[certificates] Generated etcd/server certificate and key.
[certificates] etcd/server serving cert is signed for DNS names [localhost] and IPs [127.0.0.1]
[certificates] Generated etcd/peer certificate and key.
[certificates] etcd/peer serving cert is signed for DNS names [k8smaster] and IPs [10.0.100.202]
[certificates] Generated etcd/healthcheck-client certificate and key.
[certificates] Generated apiserver-etcd-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests".
[init] This might take a minute or longer if the control plane images have to be pulled.
Unfortunately, an error has occurred:
timed out waiting for the condition
This error is likely caused by:
- The kubelet is not running
- The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)
- Either there is no internet connection, or imagePullPolicy is set to "Never",
so the kubelet cannot pull or find the following control plane images:
- k8s.gcr.io/kube-apiserver-amd64:v1.10.0
- k8s.gcr.io/kube-controller-manager-amd64:v1.10.0
- k8s.gcr.io/kube-scheduler-amd64:v1.10.0
- k8s.gcr.io/etcd-amd64:3.1.12 (only if no external etcd endpoints are configured)
If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:
- 'systemctl status kubelet'
- 'journalctl -xeu kubelet'
couldn't initialize a Kubernetes cluster
那出现这个问题大部分原因是因为安装的K8S版本和依赖的K8S相关镜像版本不符导致的，关于这部分排错可以查看/var/log/message我们在文章开始安装的时候也提到了要多看日志。
还有些童鞋可能会说，那我安装失败了，怎么清理环境重新安装啊？下面教大家一条命令：
kubeadm reset
好了，至此就完成了K8S三节点集群的安装部署。