Error connecting to the target: (Error -183 @ 0x0) The controller has detected a cable break far-from itself.

[Start: Spectrum Digital XDS560V2 STM USB Emulator_0]

Execute the command:

%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity

[Result]

-----[Print the board config pathname(s)]------------------------------------

C:Usersa0224181AppDataLocalTEXASI~1
CCS iBrdDat estBoard.dat

-----[Print the reset-command software log-file]-----------------------------

This utility has selected a 560/2xx-class product.
This utility will load the program 'sd560v2u.out'.
Loaded FPGA Image: C: iccsv6ccs_basecommonuscifdtc_top.jbc
The library build date was 'Jul 27 2016'.
The library build time was '17:21:41'.
The library package version is '6.0.407.3'.
The library component version is '35.35.0.0'.
The controller does not use a programmable FPGA.

An error occurred while hard opening the controller.

-----[An error has occurred and this utility has aborted]--------------------

This error is generated by TI's USCIF driver or utilities.

The value is '-183' (0xffffff49).
The title is 'SC_ERR_CTL_CBL_BREAK_FAR'.

The explanation is:
The controller has detected a cable break far-from itself.
The user must connect the cable/pod to the target.

[End: Spectrum Digital XDS560V2 STM USB Emulator_0]

this question is solved by EMU1 connect to ground

the picture is ritht: as show