Openstack VM live migration can have 3 categories:
-Block live migration without shared storage
-Shared storage based live migration
-Volume backed VM live migration
Block live migration
Block live migration does not require shared storage among nova-compute nodes, it uses network(TCP) to copy VM disk from source host to destination host, thus it takes longer time to complete than shared storage based live migration. Also during migration, host performance will be degraded in network and CPU points of view.
To enable block live migration, we need to change libvirtd and nova.conf configurations on every nova-compute hosts:
->Edit /etc/libvirt/libvirtd.conf
listen_tls = 0
listen_tcp = 1
auth_tcp = "none"
->Edit /etc/sysconfig/libvirtd
LIBVIRTD_ARGS="–listen"
->Restart libvirtd
service libvirtd restart
->Edit /etc/nova/nova.conf, add following line:
live_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE,VIR_MIGRATE_PEER2PEER,VIR_MIGRATE_LIVE
>Restart nova-compute service
service openstack-nova-compute restart
->Check running VMs
nova list
+--------------------------------------+-------------------+--------+---------------------+
| ID | Name | Status | Networks |
+--------------------------------------+-------------------+--------+---------------------+
| 5374577e-7417-4add-b23f-06de3b42c410 | vm-live-migration | ACTIVE | ncep-net=10.20.20.3 |
+--------------------------------------+-------------------+--------+---------------------+
->Check which host the VM in running on
nova show vm-live-migration
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T08:47:13Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-1 |
->Check all available hosts
nova host-list
+--------------+-------------+----------+
| host_name | service | zone |
+--------------+-------------+----------+
| compute-1 | compute | nova |
| compute-2 | compute | nova |
>Let's migrate the vm to host compute-2
nova live-migration --block-migrate vm-live-migration compute-2
>Later when we check vm status again, we cloud see the host changes to compute-2
nova show vm-live-migration
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T09:45:33Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-2 |
>We can just do a migration without specifying destination host, nova-scheduler will choose a free host for you
nova live-migration --block-migrate vm-live-migration
Shared storage based live migration
This example we use GlusterFS as shared storage for nova-compute nodes. Since VM disk is stored on shared storage, hence live migration much much more faster than block live migration.
1.Setup GlusterFS cluster for nova-compute nodes
->Prepare 4 nodes, each node has an extra disk other than OS disk, dedicated for GlusterFS cluster
Node 1: 10.68.124.18 /dev/sdb 1TB
Node 2: 10.68.124.19 /dev/sdb 1TB
Node 3: 10.68.124.20 /dev/sdb 1TB
Node 4: 10.68.124.21 /dev/sdb 1TB
->Configure Node 1-4
yum install -y xfsprogs.x86_64
mkfs.xfs -f -i size=512 /dev/sdb
mkdir /brick1
echo "/dev/sdb /brick1 xfs defaults 1 2" >> /etc/fstab 1014 cat /etc/fstab
mount -a && mount
mkdir /brick1/sdb
yum install glusterfs-fuse glusterfs-server
/etc/init.d/glusterd start
chkconfig glusterd on
->On Node-1, add peers
gluster peer probe 10.68.125.19
gluster peer probe 10.68.125.20
gluster peer probe 10.68.125.21
->On node-1, create a volume for nova-compute
gluster volume create nova-gluster-vol replica 2 10.68.125.18:/brick1/sdb 10.68.125.19:/brick1/sdb 10.68.125.20:/brick1/sdb 10.68.125.21:/brick1/sdb
gluster volume start nova-gluster-vol
->We can check the volume information
gluster volume info
Volume Name: nova-gluster-vol
Type: Distributed-Replicate
Status: Started
Number of Bricks: 2 x 2 = 4
Transport-type: tcp
Bricks:
Brick1: 10.68.125.18:/brick1/sdb
Brick2: 10.68.125.19:/brick1/sdb
Brick3: 10.68.125.20:/brick1/sdb
Brick4: 10.68.125.21:/brick1/sdb
->On each nova-compute node, mount the GluserFS volume to /var/lib/nova/instances
yum install glusterfs-fuse
mount.glusterfs 10.68.125.18:/nova-gluster-vol /var/lib/nova/instances
echo "10.68.125.18:/nova-gluster-vol /var/lib/nova/instances glusterfs defaults 1 2" >> /etc/fstab
chown -R nova:nova /var/lib/nova/instances
2.Configure libvirt and nova.conf on every nova-compute node
->Edit /etc/libvirt/libvirtd.conf
listen_tls = 0
listen_tcp = 1
auth_tcp = "none"
->Edit /etc/sysconfig/libvirtd
LIBVIRTD_ARGS="–listen"
->Restart libvirtd
service libvirtd restart
->Edit /etc/nova/nova.conf, add following line:
live_migration_flag=VIR_MIGRATE_UNDEFINE_SOURCE,VIR_MIGRATE_PEER2PEER,VIR_MIGRATE_LIVE
3.Let's try live migration
->Check running VMs
nova list
+--------------------------------------+-------------------+--------+---------------------+
| ID | Name | Status | Networks |
+--------------------------------------+-------------------+--------+---------------------+
| 5374577e-7417-4add-b23f-06de3b42c410 | vm-live-migration | ACTIVE | ncep-net=10.20.20.3 |
+--------------------------------------+-------------------+--------+---------------------+
->Check which host the VM in running on
nova show vm-live-migration
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T08:47:13Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-1 |
->Check all available hosts
nova host-list
+--------------+-------------+----------+
| host_name | service | zone |
+--------------+-------------+----------+
| compute-1 | compute | nova |
| compute-2 | compute | nova |
>Let's migrate the vm to host compute-2
nova live-migration vm-live-migration compute-2
>Migration should be finished in seconds, let's check vm status again, we cloud see the host changes to compute-2
nova show vm-live-migration
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T09:45:33Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-2 |
>We can just do a migration without specifying destination host, nova-scheduler will choose a free host for us
nova live-migration vm-live-migration
3.Volume backed VM live migration
VMs booted from volume can be also easily and quickly migrated just like shared storage based live migration since both cases VM disks are on top of shared storages.
->Create a bootable volume from an existing image
cinder create --image-id --display-name bootable-vol-rhel6.3 5
->Launch a VM from the bootable volume
nova boot --image --flavor m1.medium --block_device_mapping vda=:::0 vm-boot-from-vol
->Check which host the VM is running on
nova show vm-boot-from-vol
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T10:29:09Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-1 |
->Do live migration
nova live-migration vm-boot-from-vol
->Check VM status again
nova show vm-boot-from-vol
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T10:30:55Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-2 |
VM recovery from failed compute node
If shared storage used, or for VMs booted from volume, we can recovery them if their compute host is failed.
>Launch 1 normal VM and 1 volume backed VM, make they are all running on compute1 node. ( Use live migration if they are not on compute-1)
nova show vm-live-migration
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T10:36:35Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-1 |
nova show vm-boot-from-vol
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | ACTIVE |
| updated | 2013-08-06T10:31:21Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-1 |
->Shutdown compute-1 node
[root@compute-1 ~]# shutdown now
->Check VM status
nova list
+--------------------------------------+-------------------+---------+---------------------+
| ID | Name | Status | Networks |
+--------------------------------------+-------------------+---------+---------------------+
| 75ddb4f6-9831-4d90-b291-48e098e8f72f | vm-boot-from-vol | SHUTOFF | ncep-net=10.20.20.5 |
| 5374577e-7417-4add-b23f-06de3b42c410 | vm-live-migration | SHUTOFF | ncep-net=10.20.20.3 |
+--------------------------------------+-------------------+---------+---------------------+
Both VMs get into "SHUTOFF" status.
>Recovery them to compute-2 node
nova evacuate vm-boot-from-vol compute-2 --on-shared-storage
nova evacuate vm-live-migration compute-2 --on-shared-storage
->Check VM status
nova show vm-boot-from-vol
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | SHUTOFF |
| updated | 2013-08-06T10:42:32Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-2 |
nova show vm-live-migration
+-------------------------------------+----------------------------------------------------------+
| Property | Value |
+-------------------------------------+----------------------------------------------------------+
| status | SHUTOFF |
| updated | 2013-08-06T10:42:51Z |
| OS-EXT-STS:task_state | None |
| OS-EXT-SRV-ATTR:host | compute-2 |
Both VMs are managed by compute-2 now
-> Reboot 2 VMs
nova reboot vm-boot-from-vol
nova reboot vm-live-migration
-> Check VMs list
nova list
+--------------------------------------+-------------------+--------+---------------------+
| ID | Name | Status | Networks |
+--------------------------------------+-------------------+--------+---------------------+
| 75ddb4f6-9831-4d90-b291-48e098e8f72f | vm-boot-from-vol | ACTIVE | ncep-net=10.20.20.5 |
| 5374577e-7417-4add-b23f-06de3b42c410 | vm-live-migration | ACTIVE | ncep-net=10.20.20.3 |
+--------------------------------------+-------------------+--------+---------------------+
Both VMs are back to ACTIVE.
Notes
Currently Openstack has no mechanism to detect host and VM failure and automatically to recover/migrate VM to health host, this reply on 3rd party means to do so
There's also an interesting project named openstack-neat, which is intended to provide an extension to OpenStack implementing dynamic consolidation of Virtual Machines (VMs) using live migration. The major objective of dynamic VM consolidation is to improve the utilization of physical resources and reduce energy consumption by re-allocating VMs using live migration according to their real-time resource demand and switching idle hosts to the sleep mode. This really like vSphere DRS function.
Project website: http://openstack-neat.org
来源：pete