CMake生成Unicode版本VC工程
Just add this line in your top CMakeLists.txt file:
add_definitions(-DUNICODE -D_UNICODE)
if(MSVC)
add_definitions(-DUNICODE -D_UNICODE)
endif()
基本配置
配置生成库输出目录 ExportDir=F:Developinx64
Add Entry:
CMAKE_INSTALL_PREFIX F:Developinx64xxx
# Only enable release and debug builds
IF(CMAKE_CONFIGURATION_TYPES)
SET(CMAKE_CONFIGURATION_TYPES Release Debug )
SET(CMAKE_CONFIGURATION_TYPES "${CMAKE_CONFIGURATION_TYPES}" CACHE STRING
"Reset the configurations to what we need"
FORCE)
ENDIF()
if(MSVC)
set(CMAKE_DEBUG_POSTFIX "d")
endif()
zlib-1.2.8
修改CMakeLists.txt, 加入字符编码
if(MSVC)
add_definitions(-DUNICODE -D_UNICODE)
endif()
配置CMAKE_INSTALL_PREFIX参数, 指定头文件及编译包Install目录. ($(ExportDir)zlib-1.2.8)
Config –> Generate
打开zlib.sln进行批生成
OpenSSL-1.0.2k
1. 编译 见《INSTALL.W64》 To build for Win64/x64
32 $ perl Configure VC-WIN32 no-asm --prefix=$(ExportDir)OpenSSL-1.0.2
64 $ perl Configure VC-WIN64A no-asm --prefix=$(ExportDir)OpenSSL-1.0.2
> perl Configure VC-WIN64A no-asm --prefix=F:Developinx64OpenSSL-1.0.2
> msdo_win64a
> nmake -f ms
tdll.mak
> nmake -f ms
tdll.mak install
> cd out32dll
> ..ms est
2. 环境变量设置
OPENSSL_BASE = $(ExportDir)OpenSSL-1.0.2
OPENSSL_ROOT_DIR = $(ExportDir)OpenSSL-1.0.2
3. 包含目录
$(OPENSSL_BASE)include;
4. 库目录
$(OPENSSL_BASE)lib;
5. 库文件
libeay32.lib;ssleay32.lib;
OpenSSL-1.1.0b
1. 编译 (Win64默认为 UNICODE, 不需要加 -DUNICODE -D_UNICODE)
32 $ perl Configure VC-WIN32 no-asm --prefix=$(ExportDir)OpenSSL-1.1
64 $ perl Configure VC-WIN64A no-asm --prefix=$(ExportDir)OpenSSL-1.1
perl Configure VC-WIN64A no-asm --prefix=F:Developinx64OpenSSL-1.1
$ nmake
$ nmake test
$ nmake install
2. 环境变量设置
OPENSSL_BASE = $(ExportDir)OpenSSL
OPENSSL_ROOT_DIR = $(ExportDir)OpenSSL
3. 包含目录
$(OPENSSL_BASE)include;
4. 库目录
$(OPENSSL_BASE)lib;
5. 库文件
libcrypto.lib;libssl.lib;
libpng-1.6.28
配置CMAKE_INSTALL_PREFIX参数, 指定头文件及编译包Install目录. ($(ExportDir)jpeg-9b)
F:Developinx64libpng-1.6.28
ZLIB_INCLUDE_DIR
ZLIB_LIBRARY_DEBUG
ZLIB_LIBRARY_RELEASE
ld-version-script OFF
PNG_TESTS
Config –> Generate
打开zlib.sln进行批生成
jpeg-9b
方式1: 使用CMakeLists.txt
配置CMAKE_INSTALL_PREFIX参数, 指定头文件及编译包Install目录. ($(ExportDir)libpng-1.6.28)
F:Developinx64jpeg-9b
LIBJPEG_SOURCE_DIR F:/Develop/libs/jpeg-9b
方式2:
0. 把Win32.mak(C:Program Files (x86)Microsoft SDKsWindowsv7.1AIncludeWin32.Mak)拷贝到源文件目录
1. Open the command prompt, change to the main directory and execute the command line
NMAKE /f makefile.vc setup-v10
This will move jconfig.vc to jconfig.h and makefiles to project files.
(Note that the renaming is critical!)
2. Open the solution file jpeg.sln, build the library project.
(If you are using Visual Studio more recent than 2010 (v10), you'll
probably get a message saying that the project files are being updated.)
3. Open the solution file apps.sln, build the application projects.
4. To perform the self-test, execute the command line
NMAKE /f makefile.vc test-build
5. Move the application .exe files from `app`Release to an
appropriate location on your path.
tiff-4.0.7
配置CMAKE_INSTALL_PREFIX参数, ($(ExportDir) iff-4.0.7)
F:Developinx64 iff-4.0.7
配置zlib, jpeg
freetype-2.7
配置CMAKE_INSTALL_PREFIX参数, ($(ExportDir)freetype-2.7)
F:Developinx64freetype-2.7
配置zlib
giflib-5.1.4
配置CMAKE_INSTALL_PREFIX参数, ($(ExportDir)giflib-5.1.4)
F:Developinx64giflib-5.1.4
配置GIFLIB_SOURCE_DIR
minizip
配置CMAKE_INSTALL_PREFIX参数, ($(ExportDir)minizip)
F:Developinx64minizip
ZLIB_ROOT F:Developinx64zlib-1.2.8
glut
配置CMAKE_INSTALL_PREFIX参数, ($(ExportDir)glut)
F:Developinx64glut
GLUT_SOURCE_DIR F:DevelopGitReposOpenSceneGraph3rdPartyglut
libssh2-1.8.0
修改CMakeLists.txt, 加入字符编码
if(MSVC)
add_definitions(-DUNICODE -D_UNICODE)
endif()
配置CMAKE_INSTALL_PREFIX参数, 指定头文件及编译包Install目录. ($(ExportDir)libssh2-1.8)
F:Developinx64libssh2-1.8
关闭test,examples
Config –> Generate
打开 libssh2.sln
为debug输出目标名加上d后缀
进行批生成
手动拷贝src/debug目录下的libssh2d.lib到lib目录
curl-7.52.1
配置CMAKE_INSTALL_PREFIX参数, 指定头文件及编译包Install目录. ($(ExportDir)curl-7.52.1)
Zlib相关参数, F:/Develop/bin/x64/zlib-1.2.11
OpenSSL相关参数, F:/Develop/bin/x64/OpenSSL-1.0.2
OPENSSL_ROOT_DIR, F:/Develop/bin/x64/OpenSSL-1.0.2
ENABLE_MANUAL, OFF
BUILD_RELEASE_DEBUG_DIRS
Config –> Generate
打开 CURL.sln进行批生成
拷贝 OutputlibReleaselibcurl.dll
拷贝 OutputlibDebuglibcurl.dll 为 libcurld.dll
拷贝 OutputlibDebuglibcurl.pdb 为 libcurld.pdb
curl-7_51_0
修改CMakeLists.txt, 加入字符编码
if(MSVC)
add_definitions(-DUNICODE -D_UNICODE)
endif()
配置CMAKE_INSTALL_PREFIX参数, 指定头文件及编译包Install目录. ($(ExportDir)curl-7_51)
Zlib相关参数, F:/Develop/bin/x64/zlib/lib
BUILD_RELEASE_DEBUG_DIRS
Config –> Generate
打开 CURL.sln进行批生成
拷贝 OutputlibReleaselibcurl.dll
拷贝 OutputlibDebuglibcurl.dll 为 libcurld.dll
拷贝 OutputlibDebuglibcurl.pdb 为 libcurld.pdb
glew 2.0.0
打开VC12目录下的glew.sln,升级到VC14
设置字符集
使用x64编译 debug, release版本
拷贝 bindebug(release)x64下文件到 $(ExportDir)glew-2.0.0in
拷贝 libdebug(release)x64下文件到 $(ExportDir)glew-2.0.0lib
拷贝 include目录到$(ExportDir)glew-2.0.0
iconv 1.14
按照http://www.codeproject.com/Articles/302012/How-to-Build-libiconv-with-Microsoft-Visual-Studio说明进行配置
debug配置->常规-> 目标文件名: $(ProjectName)d
生成后,把
debug(release)libiconv(d).lib拷贝到 $(ExportDir)lib
iconv.h拷贝到 $(ExportDir)include
debug(release)libiconv(d).dll(pdb)拷贝到 $(ExportDir)in
libxml2-2.9.4
将其中的iconv.h放入$(ExportDir)ininclude目录中，将其中的libiconv.lib放入$(ExportDir)inlib中，并改名为iconv.lib.(没有相应目录就新建一个)。
修改libxml2win32Makefile.msvc
POST_TAG = ""
!if "$(DEBUG)" == "1"
POST_TAG = "d"
!endif
XML_SO = $(XML_BASENAME)$(POST_TAG).dll
XML_IMP = $(XML_BASENAME)$(POST_TAG).lib
XML_DEF = $(XML_BASENAME).def
XML_A = $(XML_BASENAME)$(POST_TAG)_a.lib
XML_A_DLL = $(XML_BASENAME)$(POST_TAG)_a_dll.lib
cscript configure.js compiler=msvc prefix=$(ExportDir)in include=$(ExportDir)ininclude lib=$(ExportDir)inlib debug=yes(no)
cscript configure.js compiler=msvc prefix=F:Developinx64in include=F:Developinx64ininclude lib=F:Developinx64inlib debug=yes
手工拷贝文件
cscript configure.js compiler=msvc prefix=F:Developinx64in include=F:Developinx64ininclude lib=F:Developinx64inlib debug=no
nmake install
CGAL-4.9
修改CMakeLists.txt, 加入字符编码
if(MSVC)
add_definitions(-DUNICODE -D_UNICODE)
endif()
配置CMAKE_INSTALL_PREFIX参数, 指定头文件及编译包Install目录. ($(ExportDir)CGAL)
F:/Develop/bin/x64/CGAL
Zlib相关参数, F:/Develop/bin/x64/zlib/lib
历史：
2017-01-31: OpenSSL-1.0.2K编译
2017-02-12：