Sub 获取模板信息() Call sw初始化("") FilePathName = swModel.GetPathName If swFileTYpe = 2 Then '==== ElseIf swFileTYpe = 3 Then ' Dim vDepend As Variant vDepend = swApp.GetDocumentDependencies2(FilePathName, False, True, False) For i = 0 To (UBound(vDepend) - 1) / 2 Debug.Print " " + vDepend(2 * i) + " --> " + vDepend(2 * i + 1) Next i 对应装配体 = vDepend(1) Call sw初始化_获取指定文件(对应装配体) End If Set sw全名字典 = CreateObject("Scripting.Dictionary") Set 挑出sw全名字典 = CreateObject("Scripting.Dictionary") ' sw全名字典.Add swModel.GetPathName, "00" Set config = swModel.GetActiveConfiguration 配置名 = config.Name 当前sw全名 = swModel.GetPathName sw全名字典.Add 当前sw全名, "00" If swFileTYpe = 2 Then Set 组件对象 = swModel 上层编号 = "" Call 遍历组件特征(sw全名字典, 组件对象, 上层编号, 挑出sw全名字典) End If For Each k In sw全名字典 If Not 挑出sw全名字典.Exists(k) And k <> 当前sw全名 Then sw全名字典.Remove k End If Next 清除 Call 填写全名信息(sw全名字典) Call 获取属性尺寸等信息("模板") End Sub Sub 遍历组件特征(ByRef sw全名字典, ByVal 组件对象, ByVal 上层编号, ByRef 挑出sw全名字典) 计数 = 0 Set swFeat = 组件对象.FirstFeature Do While Not swFeat Is Nothing If swFeat.GetTypeName2 = "Reference" Or swFeat.GetTypeName2 = "SplitReference" Then 'SplitReference用于分割特征生成的装配体 SelMgr.SuspendSelectionList numAdded = SelMgr.AddSelectionListObject(swFeat, selData) Set 子组件对象 = SelMgr.GetSelectedObject6(1, -1) Call 分析子组件(sw全名字典, 子组件对象, 上层编号, 挑出sw全名字典, 计数) ElseIf 含其中之一(swFeat.GetTypeName2, "Pattern|MirrorCompFeat") Then Set swSubFeat = swFeat.GetFirstSubFeature Do While Not swSubFeat Is Nothing Debug.Print swSubFeat.GetTypeName2&; "==" & swSubFeat.Name SelMgr.SuspendSelectionList numAdded = SelMgr.AddSelectionListObject(swSubFeat, selData) Set 子组件对象 = SelMgr.GetSelectedObject6(1, -1) Call 分析子组件(sw全名字典, 子组件对象, 上层编号, 挑出sw全名字典, 计数) Set swSubFeat = swSubFeat.GetNextSubFeature Loop End If Set swFeat = swFeat.GetNextFeature Loop End Sub Sub 分析子组件(ByRef sw全名字典, ByVal 子组件对象, ByVal 上层编号, ByRef 挑出sw全名字典, ByRef 计数) FilePathName2 = 子组件对象.GetPathName ' 配置名 = 子组件对象.ReferencedConfiguration 键 = FilePathName2 编号连接符 = IIf(上层编号 = "", "", ".") 计数 = 计数 + 1 本层编号 = 上层编号 & 编号连接符 & Format(计数, "00") On Error Resume Next sw全名字典.Add 键, 本层编号 是虚拟件 = 子组件对象.IsVirtual If 挑出sw全名字典.Exists(键) Then Call 添加父组件(子组件对象, 挑出sw全名字典) ElseIf Not 是虚拟件 Then nRefCount = 子组件对象.ListExternalFileReferencesCount If nRefCount > 0 Then On Error Resume Next 挑出sw全名字典.Add 键, "" Call 添加父组件(子组件对象, 挑出sw全名字典) End If End If Call 类型判断(FilePathName2) If swFileTYpe = 2 Then Call 遍历组件特征(sw全名字典, 子组件对象, 本层编号, 挑出sw全名字典) Else '…… End If End Sub Sub 添加父组件(ByVal 子组件对象, ByRef 挑出sw全名字典) Set swParentComp = 子组件对象.GetParent If Not Nothing Is swParentComp Then 键 = swParentComp.GetPathName On Error Resume Next 挑出sw全名字典.Add 键, "" Call 添加父组件(swParentComp, 挑出sw全名字典) End If End Sub Sub 填写全名信息(ByVal sw全名字典) Set 表字典 = CreateObject("Scripting.Dictionary") 获取行列号 当前行 = 首行 For Each k In sw全名字典.Keys Call Excel转字典单行(表字典, 当前行) Set 行 = 表字典(当前行) FilePathName = k Call 拆分文件名(FilePathName) 行("编号").Value = IIf(sw全名字典(k) <> "", sw全名字典(k), "0") 行("模板路径").Value = FilePath '填写路径 行("模板名称").Value = FilenameWHZ '填写文件名 行("格式").Value = Right(Filename, 6) '填写类型 行("新路径").Value = FilePath 行("新名称").Value = FilenameWHZ 当前行 = 当前行 + 1 Next End Sub
Sub 获取属性尺寸等信息(ByVal 目标对象) Set 表字典 = CreateObject("Scripting.Dictionary") Call Excel转字典(表字典) Dim lRetVal As Long Dim ValOut As String Dim ResolvedValOut As String Dim wasResolved As Boolean For Each 行 In 表字典.Items If 目标对象 = "模板" Then sw全名 = 路径加斜杆(行("模板路径")) & 行("模板名称") & "." & 行("格式") Else sw全名 = 路径加斜杆(行("新路径")) & 行("新名称") & "." & 行("格式") End If Call sw初始化_获取指定文件(sw全名) Set cusPropMgr = swModel.Extension.CustomPropertyManager("") For Each 列名 In 行 If 行(列名).Column >= Range("属性首列").Column Then 属性名 = 列名 lRetVal = cusPropMgr.Get5(属性名, False, ValOut, ResolvedValOut, wasResolved) 行(列名).Value = ValOut End If Next '分析尺寸、特征======开始 Set 尺寸字典 = CreateObject("scripting.dictionary") Set 特征字典 = CreateObject("scripting.dictionary") Set 拟替换字典 = CreateObject("scripting.dictionary") Dim 文件夹中 As Boolean Dim 当前文件夹 As String Dim 进入阵列 As Boolean Dim 第几个 As Integer '遍历特征开始=============== Set swFeat = swModel.FirstFeature Do While Not swFeat Is Nothing ' Debug.Print swFeat.Name&; "==" & swFeat.GetTypeName2 '遍历尺寸 Set swDispDim = swFeat.GetFirstDisplayDimension Do While Not swDispDim Is Nothing Set swDim = swDispDim.GetDimension Debug.Print " [" & swDim.GetNameForSelection & "] = " & swDim.GetSystemValue2("") 尺寸全名 = swDim.GetNameForSelection 尺寸短名称 = Left(尺寸全名, InStrRev(尺寸全名, "@")) If InStr(1, 尺寸短名称, "xl", 1) <> 0 Then 尺寸字典(swDim.GetNameForSelection) = swDim.GetUserValueIn(swModel) End If Set swDispDim = swFeat.GetNextDisplayDimension(swDispDim) Loop If InStr(1, swFeat.Name, "xl", 1) <> 0 Then If swFeat.GetTypeName2 <> "Reference" Then 是否压缩 = IIf(swFeat.IsSuppressed, "压缩", "") 特征字典(swFeat.Name) = Array(swFeat.GetTypeName2, 是否压缩) End If End If Set swFeat = swFeat.GetNextFeature Loop '遍历特征结束=============== 列号 = 末列 + 1 For Each k In 尺寸字典.Keys Cells(行("模板路径").Row, 列号).Select ActiveCell = k ActiveCell.Offset(0, 1).Select ActiveCell = 尺寸字典(k) ' Selection.ColumnWidth = 4 列号 = 列号 + 2 Next '分析尺寸、特征======结束 Next End Sub
Sub 获取类似件信息() Set 表字典 = CreateObject("Scripting.Dictionary") Call Excel转字典(表字典) Dim lRetVal As Long Dim ValOut As String Dim ResolvedValOut As String Dim wasResolved As Boolean 新首列 = Range("属性首列").Column Cells(首行, 新首列).Resize(末行 - 首行 + 1, 末列 - 新首列 + 1).Select Selection.ClearContents For Each 行 In 表字典.Items sw全名 = 路径加斜杆(行("新路径")) & 行("新名称") & "." & 行("格式") Call sw初始化_获取指定文件(sw全名) Set cusPropMgr = swModel.Extension.CustomPropertyManager("") For Each 列名 In 行 If 行(列名).Column >= Range("属性首列").Column Then 属性名 = 列名 lRetVal = cusPropMgr.Get5(属性名, False, ValOut, ResolvedValOut, wasResolved) 行(列名).Value = ValOut End If Next 列号 = 末列 + 1 Cells(行("模板路径").Row, 列号).Select Do While ActiveCell <> "" 尺寸名 = ActiveCell Set swDim = swModel.Parameter(尺寸名) If Not swDim Is Nothing Then 尺寸值 = swDim.GetUserValueIn(swModel) Else 尺寸值 = "无" End If ActiveCell.Offset(0, 1).Select ActiveCell = 尺寸值 ActiveCell.Offset(0, 1).Select Loop Next End Sub
Sub 生成类似零部件(ByVal 包含工程图) Call sw初始化("") Set swPackAndGo = swModelDocExt.GetPackAndGo() swPackAndGo.IncludeDrawings = 包含工程图 namesCount = swPackAndGo.GetDocumentNamesCount Set 需打包文件字典 = CreateObject("Scripting.Dictionary") Set 表字典 = CreateObject("Scripting.Dictionary") Call Excel转字典(表字典) For Each 行 In 表字典.Items 打包路径 = 路径加斜杆(行("新路径")) 打包短名 = 行("新名称") 拟打包全名 = 打包路径 & 打包短名 & "." & 行("格式") 行("拟打包全名") = 拟打包全名 原全名 = 行("模板路径") & 行("模板名称") & "." & 行("格式") If (打包路径 = "" Or 打包短名 = "" Or 拟打包全名 = 原全名) Then MsgBox "路径或名称不能为空或者与模板相同，请修改！", vbInformation Exit Sub End If 需打包文件字典.Add UCase(原全名), UCase(拟打包全名) If 包含工程图 Then 同名工程图 = 打包路径 & 打包短名 & "." & "SLDDRW" 原全名 = 行("模板路径") & 行("模板名称") & "." & "SLDDRW" 需打包文件字典.Add UCase(原全名), UCase(同名工程图) End If Next Status = swPackAndGo.GetDocumentSaveToNames(pgFileNames, pgFileStatus) For i = 0 To UBound(pgFileNames) k = UCase(pgFileNames(i)) If 需打包文件字典.Exists(k) Then pgFileNames(i) = 需打包文件字典(k) End If Next For Each k In 需打包文件字典.Keys 新名称 = 需打包文件字典(k) If "" <> Dir(新名称) Then 某些文件已存在 = True Exit For End If Next Set 释放了锁定的文件 = CreateObject("Scripting.Dictionary") If 某些文件已存在 Then 第一个有效路径 = Cells(首行, Range("新路径").Column) 第一个有效路径 = 路径加斜杆(第一个有效路径) Call 热移动文件(需打包文件字典, 第一个有效路径, 释放了锁定的文件) End If Status = swPackAndGo.SetDocumentSaveToNames(pgFileNames) statuses = swModelDocExt.SavePackAndGo(swPackAndGo) 行号 = 首行 For Each it In statuses Debug.Print it Set 行 = 表字典(行号) On Error Resume Next 行("返回值").Select On Error Resume Next 行("返回值").Value = it 行号 = 行号 + 1 Next Call 重载或替换文件(释放了锁定的文件) Call 处理新生成零部件(表字典) End Sub Sub 打包cs() Call sw初始化("") Dim swPackAndGo As SldWorks.PackAndGo Dim swModelDocExt As SldWorks.ModelDocExtension Set swModelDocExt = swModel.Extension Set swPackAndGo = swModelDocExt.GetPackAndGo() namesCount = swPackAndGo.GetDocumentNamesCount Status = swPackAndGo.GetDocumentNames(pgFileNames) Status = swPackAndGo.SetDocumentSaveToNames(pgFileNames) End Sub Sub 处理新生成零部件(ByVal 表字典) For Each 行 In 表字典.Items sw全名 = 行("拟打包全名") Call sw初始化_获取指定文件(sw全名) Set cusPropMgr = swModel.Extension.CustomPropertyManager("") For Each 列名 In 行 On Error Resume Next 列号 = 行(列名).Column If 列号 >= Range("属性首列").Column Then 属性名 = 列名 属性值 = 行(列名) If 属性值 <> "" Then lRetVal = cusPropMgr.Add3(属性名, 30, 属性值, swCustomPropertyDeleteAndAdd) End If End If Next 列号 = 末列 + 1 Cells(行("模板路径").Row, 列号).Select Do While ActiveCell <> "" 尺寸名 = ActiveCell ActiveCell.Offset(0, 1).Select 尺寸值 = ActiveCell If 尺寸值 <> "" Then Set myDimension = swModel.Parameter(尺寸名) lstatus = myDimension.SetUserValueIn2(swModel, 尺寸值, 0) End If ActiveCell.Offset(0, 1).Select Loop SaveOk = swModel.Save3(1, lErrors, lwarnings) Next End Sub
Private Sub CheckBox仅涂色行_Click() End Sub Private Sub CommandButton当前拟覆盖_Click() 当前拟覆盖 End Sub Private Sub CommandButton获取类似件信息_Click() 获取类似件信息 End Sub Private Sub CommandButton获取模板信息_Click() 获取模板信息 End Sub Private Sub CommandButton加后缀_Click() Call 加前后缀("后缀") End Sub Private Sub CommandButton加前缀_Click() Call 加前后缀("前缀") End Sub Private Sub CommandButton仅当前_Click() 仅当前 End Sub Private Sub CommandButton热覆盖_Click() 热覆盖 End Sub Private Sub CommandButton移动文件_Click() 移动文件 End Sub Private Sub CommandButton生成类似零部件_Click() Call 生成类似零部件(CheckBox含工程图.Value) End Sub
Public swApp As Object, swModel As Object, swFeatMgr As Object, swConfigMgr As Object Public selData As Object, SelMgr As Object Public lstatus As Long, lwarnings As Long, lErrors As Long Public FilePathName, FilePath, Filename, FilenameWHZ As String Public swFileTYpe As Integer Public 坐标对象 As Object Public swModelDocExt As SldWorks.ModelDocExtension Public swPackAndGo As Object Public swDim As SldWorks.Dimension Sub sw初始化(ByVal sw全名) Set swApp = CreateObject("SldWorks.Application") '启动SW If sw全名 = "" Then Set swModel = swApp.ActiveDoc sw全名 = swModel.GetPathName End If Call 拆分文件名(sw全名) Call 类型判断(sw全名) Set swModel = swApp.OpenDoc(sw全名, swFileTYpe) '开启档案 Set swModel = swApp.ActivateDoc3(sw全名, False, 0, lErrors) swset FilePathName = swModel.GetPathName End Sub Sub sw初始化_获取指定文件(ByVal sw全名) Set swApp = CreateObject("SldWorks.Application") '启动SW Call 类型判断(sw全名) Set swModel = swApp.GetOpenDocumentByName(sw全名) If swModel Is Nothing Then Set swModel = swApp.OpenDoc(sw全名, swFileTYpe) swModel.Visible = False End If swset End Sub Sub 拆分文件名(ByVal FilePathName) FilePath = Left(FilePathName, InStrRev(FilePathName, "")) '分解路径 Filename = Right(FilePathName, Len(FilePathName) - Len(FilePath)) '分解文件名 FilenameWHZ = Left(Filename, Len(Filename) - 7) End Sub Sub 类型判断(ByVal FilePathName) If UCase(Right(FilePathName, 3)) = "PRT" Then swFileTYpe = 1 If UCase(Right(FilePathName, 3)) = "LFP" Then swFileTYpe = 1 If UCase(Right(FilePathName, 3)) = "ASM" Then swFileTYpe = 2 If UCase(Right(FilePathName, 3)) = "DRW" Then swFileTYpe = 3 If UCase(Right(FilePathName, 6)) = "DRWDOT" Then swFileTYpe = 3 End Sub Sub swset() Set swFeatMgr = swModel.FeatureManager Set SelMgr = swModel.SelectionManager Set selData = SelMgr.CreateSelectData Set swConfigMgr = swModel.ConfigurationManager Set swModelDocExt = swModel.Extension End Sub Sub 激活窗口() If Range("激活sw窗口方式") = "AppActivate" Then 窗口标题集 = Array( _ Filename & " - 图纸1", _ Filename & " - 图纸1 *", _ FilenameWHZ & " - 图纸1", _ FilenameWHZ & " - 图纸1 *", _ FilenameWHZ & " - 图纸2", _ FilenameWHZ & " - 图纸2 *", _ Filename, _ Filename & " *", _ FilenameWHZ, _ FilenameWHZ & " *" _ ) For Each 窗口标题 In 窗口标题集 On Error Resume Next AppActivate 窗口标题 If Err.Number <> 0 Then Err.Clear Else Exit For End If Next Else sw全名 = swModel.GetPathName cmd = "explorer.exe """ & sw全名 & """" Shell cmd, 1 End If End Sub Function 映射特征类型(ByVal 原特征类型) As String Set d = CreateObject("scripting.dictionary") d.Add "ICE", "BODYFEATURE" d.Add "Chamfer", "BODYFEATURE" d.Add "ProfileFeature", "SKETCH" d.Add "DeleteBody", "BODYFEATURE" d.Add "BaseBody", "BODYFEATURE" d.Add "Cut", "BODYFEATURE" d.Add "LPattern", "BODYFEATURE" d.Add "HoleWzd", "BODYFEATURE" d.Add "Reference", "COMPONENT" d.Add "MirrorPattern", "BODYFEATURE" d.Add "LocalLPattern", "COMPPATTERN" If d.Exists(原特征类型) Then 映射特征类型 = d(原特征类型) End If End Function Sub 映射图纸大小(ByRef 映射字典) Set 映射字典("swto俗称") = CreateObject("scripting.dictionary") 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA3size, "A3" 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA2size, "A2" 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA4sizeVertical, "A4" 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA4size, "A4横" Set 映射字典("俗称tosw") = CreateObject("scripting.dictionary") For Each k In 映射字典("swto俗称") 映射字典("俗称tosw").Add 映射字典("swto俗称")(k), k Next End Sub Sub 激活窗口cs() Set 窗口标题集 = CreateObject("Scripting.Dictionary") 窗口标题集.Add "00_kz", "" For Each 窗口标题 In 窗口标题集.Keys On Error Resume Next AppActivate 窗口标题 If Err.Number <> 0 Then Err.Clear Else Exit For End If Next End Sub Sub 获取工程图对象模型() If swFileTYpe = 3 Then ' Dim vDepend As Variant vDepend = swApp.GetDocumentDependencies2(FilePathName, False, True, False) For i = 0 To (UBound(vDepend) - 1) / 2 Debug.Print " " + vDepend(2 * i) + " --> " + vDepend(2 * i + 1) Next i 对应模型 = vDepend(1) Call sw初始化_获取指定文件(对应模型) End If End Sub
Public swApp As Object, swModel As Object, swFeatMgr As Object, swConfigMgr As Object Public selData As Object, SelMgr As Object Public lstatus As Long, lwarnings As Long, lErrors As Long Public FilePathName, FilePath, Filename, FilenameWHZ As String Public swFileTYpe As Integer Public 坐标对象 As Object Public swModelDocExt As SldWorks.ModelDocExtension Public swPackAndGo As Object Public swDim As SldWorks.Dimension Sub sw初始化(ByVal sw全名) Set swApp = CreateObject("SldWorks.Application") '启动SW If sw全名 = "" Then Set swModel = swApp.ActiveDoc sw全名 = swModel.GetPathName End If Call 拆分文件名(sw全名) Call 类型判断(sw全名) Set swModel = swApp.OpenDoc(sw全名, swFileTYpe) '开启档案 Set swModel = swApp.ActivateDoc3(sw全名, False, 0, lErrors) swset FilePathName = swModel.GetPathName End Sub Sub sw初始化_获取指定文件(ByVal sw全名) Set swApp = CreateObject("SldWorks.Application") '启动SW Call 类型判断(sw全名) Set swModel = swApp.GetOpenDocumentByName(sw全名) If swModel Is Nothing Then Set swModel = swApp.OpenDoc(sw全名, swFileTYpe) swModel.Visible = False End If swset End Sub Sub 拆分文件名(ByVal FilePathName) FilePath = Left(FilePathName, InStrRev(FilePathName, "")) '分解路径 Filename = Right(FilePathName, Len(FilePathName) - Len(FilePath)) '分解文件名 FilenameWHZ = Left(Filename, Len(Filename) - 7) End Sub Sub 类型判断(ByVal FilePathName) If UCase(Right(FilePathName, 3)) = "PRT" Then swFileTYpe = 1 If UCase(Right(FilePathName, 3)) = "LFP" Then swFileTYpe = 1 If UCase(Right(FilePathName, 3)) = "ASM" Then swFileTYpe = 2 If UCase(Right(FilePathName, 3)) = "DRW" Then swFileTYpe = 3 If UCase(Right(FilePathName, 6)) = "DRWDOT" Then swFileTYpe = 3 End Sub Sub swset() Set swFeatMgr = swModel.FeatureManager Set SelMgr = swModel.SelectionManager Set selData = SelMgr.CreateSelectData Set swConfigMgr = swModel.ConfigurationManager Set swModelDocExt = swModel.Extension End Sub Sub 激活窗口() If Range("激活sw窗口方式") = "AppActivate" Then 窗口标题集 = Array( _ Filename & " - 图纸1", _ Filename & " - 图纸1 *", _ FilenameWHZ & " - 图纸1", _ FilenameWHZ & " - 图纸1 *", _ FilenameWHZ & " - 图纸2", _ FilenameWHZ & " - 图纸2 *", _ Filename, _ Filename & " *", _ FilenameWHZ, _ FilenameWHZ & " *" _ ) For Each 窗口标题 In 窗口标题集 On Error Resume Next AppActivate 窗口标题 If Err.Number <> 0 Then Err.Clear Else Exit For End If Next Else sw全名 = swModel.GetPathName cmd = "explorer.exe """ & sw全名 & """" Shell cmd, 1 End If End Sub Function 映射特征类型(ByVal 原特征类型) As String Set d = CreateObject("scripting.dictionary") d.Add "ICE", "BODYFEATURE" d.Add "Chamfer", "BODYFEATURE" d.Add "ProfileFeature", "SKETCH" d.Add "DeleteBody", "BODYFEATURE" d.Add "BaseBody", "BODYFEATURE" d.Add "Cut", "BODYFEATURE" d.Add "LPattern", "BODYFEATURE" d.Add "HoleWzd", "BODYFEATURE" d.Add "Reference", "COMPONENT" d.Add "MirrorPattern", "BODYFEATURE" d.Add "LocalLPattern", "COMPPATTERN" If d.Exists(原特征类型) Then 映射特征类型 = d(原特征类型) End If End Function Sub 映射图纸大小(ByRef 映射字典) Set 映射字典("swto俗称") = CreateObject("scripting.dictionary") 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA3size, "A3" 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA2size, "A2" 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA4sizeVertical, "A4" 映射字典("swto俗称").Add swDwgPaperSizes_e.swDwgPaperA4size, "A4横" Set 映射字典("俗称tosw") = CreateObject("scripting.dictionary") For Each k In 映射字典("swto俗称") 映射字典("俗称tosw").Add 映射字典("swto俗称")(k), k Next End Sub Sub 激活窗口cs() Set 窗口标题集 = CreateObject("Scripting.Dictionary") 窗口标题集.Add "00_kz", "" For Each 窗口标题 In 窗口标题集.Keys On Error Resume Next AppActivate 窗口标题 If Err.Number <> 0 Then Err.Clear Else Exit For End If Next End Sub Sub 获取工程图对象模型() If swFileTYpe = 3 Then ' Dim vDepend As Variant vDepend = swApp.GetDocumentDependencies2(FilePathName, False, True, False) For i = 0 To (UBound(vDepend) - 1) / 2 Debug.Print " " + vDepend(2 * i) + " --> " + vDepend(2 * i + 1) Next i 对应模型 = vDepend(1) Call sw初始化_获取指定文件(对应模型) End If End Sub
Sub 热移动文件(ByRef 需移动文件字典, ByVal 第一个有效路径, ByRef 释放了锁定的文件) 拟移动路径 = 第一个有效路径 & "移动文件" If "" <> Dir(拟移动路径, 16) Then a = Format(Date, "yymmdd") '当前年月日 b = Format(Time, "hhmmss") '当前时间 拟移动路径 = 拟移动路径 & "=" & a & "." & b End If VBA.MkDir (拟移动路径) Set fso = CreateObject("Scripting.FileSystemObject") For Each 新名称 In 需移动文件字典.Keys 新名称 = 需移动文件字典(新名称) If "" <> Dir(新名称) Then Call 拆分文件名(新名称) 拟移动文件 = 拟移动路径 & "" & Filename On Error Resume Next fso.MoveFile 新名称, 拟移动文件 '释放锁定后再删除文件 If Err.Number <> 0 Then Set kkswModel = swApp.GetOpenDocumentByName(新名称) nRetVal = kkswModel.ForceReleaseLocks 释放了锁定的文件.Add 新名称, kkswModel Err.Clear On Error Resume Next fso.MoveFile 新名称, 拟移动文件 If Err.Number <> 0 Then AppActivate ThisWorkbook.Name MsgBox "移动打开的文件出错", vbInformation End If End If End If Next Set fso = Nothing End Sub Sub 重载或替换文件(ByVal 释放了锁定的文件) For Each 新名称 In 释放了锁定的文件.Keys Set kkswModel = 释放了锁定的文件(新名称) nRetVal重载 = kkswModel.ReloadOrReplace(False, 新名称, True) If nRetVal重载 <> 0 Then Debug.Print 新名称 & "重载有异常! nRetVal重载=" & nRetVal重载, vbInformation End If Next End Sub