1. 内存空间与io空间是对 cup 处理器地址空间的划分,在一个 cup的指令体系中内存空间和io空间的访问指令是不一样的。
2. 与硬件通信的流程参考 ldd3 实例代码
![](https://images.cnblogs.com/OutliningIndicators/ContractedBlock.gif)
#include <linux/config.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/kernel.h> /* printk() */ #include <linux/fs.h> /* everything... */ #include <linux/errno.h> /* error codes */ #include <linux/delay.h> /* udelay */ #include <linux/kdev_t.h> #include <linux/slab.h> #include <linux/mm.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/workqueue.h> #include <linux/poll.h> #include <linux/wait.h> #include <asm/io.h> #define SHORT_NR_PORTS 8 /* use 8 ports by default */ /* * all of the parameters have no "short_" prefix, to save typing when * specifying them at load time */ static int major = 0; /* dynamic by default */ module_param(major, int, 0); static int use_mem = 0; /* default is I/O-mapped */ module_param(use_mem, int, 0); /* default is the first printer port on PC's. "short_base" is there too because it's what we want to use in the code */ static unsigned long base = 0x378; unsigned long short_base = 0; module_param(base, long, 0); MODULE_AUTHOR ("Alessandro Rubini"); MODULE_LICENSE("Dual BSD/GPL"); /* * The devices with low minor numbers write/read burst of data to/from * specific I/O ports (by default the parallel ones). * * The device with 128 as minor number returns ascii strings telling * when interrupts have been received. Writing to the device toggles * 00/FF on the parallel data lines. If there is a loopback wire, this * generates interrupts. */ int short_open (struct inode *inode, struct file *filp) { return 0; } int short_release (struct inode *inode, struct file *filp) { return 0; } /* first, the port-oriented device */ enum short_modes {SHORT_DEFAULT=0, SHORT_PAUSE, SHORT_STRING, SHORT_MEMORY}; ssize_t do_short_read (struct inode *inode, struct file *filp, char __user *buf, size_t count, loff_t *f_pos) { int retval = count, minor = iminor (inode); unsigned long port = short_base + (minor&0x0f); void *address = (void *) short_base + (minor&0x0f); int mode = (minor&0x70) >> 4; unsigned char *kbuf = kmalloc(count, GFP_KERNEL), *ptr; if (!kbuf) return -ENOMEM; ptr = kbuf; if (use_mem) mode = SHORT_MEMORY; switch(mode) { case SHORT_STRING: insb(port, ptr, count); rmb(); break; case SHORT_DEFAULT: while (count--) { *(ptr++) = inb(port); rmb(); } break; case SHORT_MEMORY: while (count--) { *ptr++ = ioread8(address); rmb(); break; } case SHORT_PAUSE: while (count--) { *(ptr++) = inb_p(port); rmb(); } break; default: /* no more modes defined by now */ retval = -EINVAL; break; } if ((retval > 0) && copy_to_user(buf, kbuf, retval)) retval = -EFAULT; kfree(kbuf); return retval; } /* * Version-specific methods for the fops structure. FIXME don't need anymore. */ ssize_t short_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) { return do_short_read(filp->f_dentry->d_inode, filp, buf, count, f_pos); } ssize_t do_short_write (struct inode *inode, struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) { int retval = count, minor = iminor(inode); unsigned long port = short_base + (minor&0x0f); void *address = (void *) short_base + (minor&0x0f); int mode = (minor&0x70) >> 4; unsigned char *kbuf = kmalloc(count, GFP_KERNEL), *ptr; if (!kbuf) return -ENOMEM; if (copy_from_user(kbuf, buf, count)) return -EFAULT; ptr = kbuf; if (use_mem) mode = SHORT_MEMORY; switch(mode) { case SHORT_PAUSE: while (count--) { outb_p(*(ptr++), port); wmb(); } break; case SHORT_STRING: outsb(port, ptr, count); wmb(); break; case SHORT_DEFAULT: while (count--) { outb(*(ptr++), port); wmb(); } break; case SHORT_MEMORY: while (count--) { iowrite8(*ptr++, address); wmb(); } break; default: /* no more modes defined by now */ retval = -EINVAL; break; } kfree(kbuf); return retval; } ssize_t short_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) { return do_short_write(filp->f_dentry->d_inode, filp, buf, count, f_pos); } unsigned int short_poll(struct file *filp, poll_table *wait) { return POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM; } struct file_operations short_fops = { .owner = THIS_MODULE, .read = short_read, .write = short_write, .poll = short_poll, .open = short_open, .release = short_release, }; /* Finally, init and cleanup */ int short_init(void) { int result; /* * first, sort out the base/short_base ambiguity: we'd better * use short_base in the code, for clarity, but allow setting * just "base" at load time. Same for "irq". */ short_base = base; /* Get our needed resources. */ if (!use_mem) { if (! request_region(short_base, SHORT_NR_PORTS, "short")) { printk(KERN_INFO "short: can't get I/O port address 0x%lx ", short_base); return -ENODEV; } } else { if (! request_mem_region(short_base, SHORT_NR_PORTS, "short")) { printk(KERN_INFO "short: can't get I/O mem address 0x%lx ", short_base); return -ENODEV; } /* also, ioremap it */ short_base = (unsigned long) ioremap(short_base, SHORT_NR_PORTS); /* Hmm... we should check the return value */ } /* Here we register our device - should not fail thereafter */ result = register_chrdev(major, "short", &short_fops); if (result < 0) { printk(KERN_INFO "short: can't get major number "); release_region(short_base,SHORT_NR_PORTS); /* FIXME - use-mem case? */ return result; } if (major == 0) major = result; /* dynamic */ /* * Now we deal with the interrupt: either kernel-based * autodetection, DIY detection or default number */ void short_cleanup(void) { unregister_chrdev(major, "short"); if (use_mem) { iounmap((void __iomem *)short_base); release_mem_region(short_base, SHORT_NR_PORTS); } else { release_region(short_base,SHORT_NR_PORTS); } } module_init(short_init); module_exit(short_cleanup);