HP p2000存储重新获取控制器IP地址

HP p2000存储重新获取控制器IP地址

一、使用串口线连接到存储控制器CLI接口

二、使用盘柜自带的usb线，需要安装如下串口线驱动.

http://h20565.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5111369&swItemId=MTX_92b54febb20a4f09a1c95f0279&swEnvOid=4138#

下载并安装驱动程序

三、使用putty工具连接到命令行

1、选择Serial(串口)

2、计算机->管理->设备管理器， 然后找到串口设备看看是COM几？

3、Speed默认为：115200

 

四、使用如下命令查看及修改ip地址.

看IP的命令：

# show network-parameters

Network Parameters Controller A

-------------------------------

IP Address: 10.134.129.188

Gateway: 10.134.0.1

Subnet Mask: 255.255.0.0

MAC Address: 00:C0:FF:0A:A3:26

Addressing Mode: DHCP

Network Parameters Controller B

-------------------------------

IP Address: 10.134.129.189

Gateway: 10.134.0.1

Subnet Mask: 255.255.0.0

MAC Address: 00:C0:FF:0A:A3:14

Addressing Mode: DHCP

修改IP的命令举例：

# set network-parameters ip 192.168.0.10 netmask 255.255.255.0 gateway

192.168.0.1 controller a

Success: Command completed successfully. - Network parameters were changed.