常用配置
bitcoin-qt.exe -testnet -printtoconsole -conf=D:Bitcoinitcoin.conf -datadir=D:BitcoinData
bitcoin-qt.exe -testnet -printtoconsole -conf=D:Bitcoinitcoin-0.15.2initcoin.conf -datadir=D:BitcoinData
bitcoin-cli -rpcport=18332 -rpcuser=rpcuser -rpcpassword=rpcpassword getblockchaininfo
bitcoin-cli -rpcport=18333 -rpcuser=rpcuser -rpcpassword=rpcpassword getinfo
bitcoin-cli -rpcconnect=192.168.101.142 -rpcport=8332 -rpcuser=rpcuser -rpcpassword=rpcpassword getblockchaininfo
配置文件如下：
##
## bitcoin.conf configuration file. Lines beginning with # are comments.
##
# Network-related settings:
# Run on the test network instead of the real bitcoin network.
testnet=1
# Run a regression test network
#regtest=0
# Connect via a SOCKS5 proxy
#proxy=127.0.0.1:9050
# Bind to given address and always listen on it. Use [host]:port notation for IPv6
#bind=<addr>
# Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
#whitebind=<addr>
##############################################################
## Quick Primer on addnode vs connect ##
## Let's say for instance you use addnode=4.2.2.4 ##
## addnode will connect you to and tell you about the ##
## nodes connected to 4.2.2.4. In addition it will tell ##
## the other nodes connected to it that you exist so ##
## they can connect to you. ##
## connect will not do the above when you 'connect' to it. ##
## It will *only* connect you to 4.2.2.4 and no one else.##
## ##
## So if you're behind a firewall, or have other problems ##
## finding nodes, add some using 'addnode'. ##
## ##
## If you want to stay private, use 'connect' to only ##
## connect to "trusted" nodes. ##
## ##
## If you run multiple nodes on a LAN, there's no need for ##
## all of them to open lots of connections. Instead ##
## 'connect' them all to one node that is port forwarded ##
## and has lots of connections. ##
## Thanks goes to [Noodle] on Freenode. ##
##############################################################
# Use as many addnode= settings as you like to connect to specific peers
#addnode=69.164.218.197
#addnode=10.0.0.2:8333
# Alternatively use as many connect= settings as you like to connect ONLY to specific peers
#connect=69.164.218.197
#connect=10.0.0.1:8333
# Listening mode, enabled by default except when 'connect' is being used
#listen=1
# Maximum number of inbound+outbound connections.
#maxconnections=
#
# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
#
# server=1 tells Bitcoin-Qt and bitcoind to accept JSON-RPC commands
server=1
# Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6.
# This option can be specified multiple times (default: bind to all interfaces)
#rpcbind=<addr>
# If no rpcpassword is set, rpc cookie auth is sought. The default `-rpccookiefile` name
# is .cookie and found in the `-datadir` being used for bitcoind. This option is typically used
# when the server and client are run as the same user.
#
# If not, you must set rpcuser and rpcpassword to secure the JSON-RPC API.
#
# The config option `rpcauth` can be added to server startup argument. It is set at initialization time
# using the output from the script in share/rpcauth/rpcauth.py after providing a username:
#
# ./share/rpcauth/rpcauth.py alice
# String to be appended to bitcoin.conf:
# rpcauth=alice:f7efda5c189b999524f151318c0c86$d5b51b3beffbc02b724e5d095828e0bc8b2456e9ac8757ae3211a5d9b16a22ae
# Your password:
# DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
#
# On client-side, you add the normal user/password pair to send commands:
rpcuser=rpcuser
rpcpassword=rpcpassword
#
# You can even add multiple entries of these to the server conf file, and client can use any of them:
# rpcauth=bob:b2dd077cb54591a2f3139e69a897ac$4e71f08d48b4347cf8eff3815c0e25ae2e9a4340474079f55705f40574f4ec99
# How many seconds bitcoin will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
#rpcclienttimeout=30
# By default, only RPC connections from localhost are allowed.
# Specify as many rpcallowip= settings as you like to allow connections from other hosts,
# either as a single IPv4/IPv6 or with a subnet specification.
# NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED,
# because the rpcpassword is transmitted over the network unencrypted.
# server=1 tells Bitcoin-Qt to accept JSON-RPC commands.
# it is also read by bitcoind to determine if RPC should be enabled
#rpcallowip=10.1.1.34/255.255.255.0
#rpcallowip=1.2.3.4/24
#rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96
#rpcallowip=192.168.101.149
rpcallowip=192.168.101.0/24
# Listen for RPC connections on this TCP port:
rpcport=8332
# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# running on another host using this option:
rpcconnect=127.0.0.1
# Wallet options
# Create transactions that have enough fees so they are likely to begin confirmation within n blocks (default: 6).
# This setting is over-ridden by the -paytxfee option.
#txconfirmtarget=n
# Pay a transaction fee every time you send bitcoins.
#paytxfee=0.000x
# Miscellaneous options
# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
#keypool=100
# Set gen=1 to attempt to generate bitcoins
gen=1
# Enable pruning to reduce storage requirements by deleting old blocks.
# This mode is incompatible with -txindex and -rescan.
# 0 = default (no pruning).
# 1 = allows manual pruning via RPC.
# >=550 = target to stay under in MiB.
#prune=550
# User interface options
# Start Bitcoin minimized
#min=1
# Minimize to the system tray
#minimizetotray=1