zoukankan      html  css  js  c++  java
  • Swapping eth0 and eth1 on OK335xS board

    /*******************************************************************************
     *                   Swapping eth0 and eth1 on OK335xS board
     * 声明:
     *     有时候我们可能希望能够将eth0和eth1的名字换一下。
     *
     *                                          2015-9-30 阴 深圳 南山平山村 曾剑锋
     ******************************************************************************/
    
    一、参考文档:
        https://e2e.ti.com/support/arm/sitara_arm/f/791/p/415084/1482324
    
    二、几种网卡接口的缩写全称:
        Described in the following sections is the 3-port switch (3PSW) Ethernet subsystem. 
        The 3-port switch gigabit ethernet subsystem provides ethernet packet communication 
        and can be configured as an ethernet switch. It provides the gigabit media independent 
        interface (GMII),reduced gigabit media independent interface (RGMII), reduced media 
        independent interface (RMII), the management data input output (MDIO) for physical 
        layer device (PHY) management.
    
    三、修改方法(etc/init.d/rc):
        ......
        #echo `ifconfig -a` 
        ifconfig eth0 down
        ifconfig eth1 down
        ip link set dev eth0 name eth2
        ip link set dev eth1 name eth0
        ip link set dev eth2 name eth1
        ifconfig eth0 up
        ifconfig eth1 up
        #echo `ifconfig -a`
        ......
  • 相关阅读:
    基本输入输出函数
    变长参数表函数的编写
    一文精通Linux 命令行
    Linux 下的种种打包、压缩、解压命令
    GIT补丁怎么打?
    GIT 合并的冲突解决途径
    GIT 库整理方法
    GIT中常用命令详解1.reset
    霍夫曼编码及译码
    C语言链表实现队列
  • 原文地址:https://www.cnblogs.com/zengjfgit/p/4848772.html
Copyright © 2011-2022 走看看