【转】分析器窗口 Profiler window

转自unity圣典：

http://game.ceeger.com/Manual/ProfilerWindow.html

http://game.ceeger.com/Manual/Profiler.html

 

分析器窗口 Profiler window

Date:2013-07-01 13:44

 

Attaching to Unity players 附加到Unity播放器

To profile your game running on an other device or a player running on another computer, it is possible to connect the editor to that other player. The dropdown Active Profiler will show all players running on the local network. These players are identified by player type and the host name running the player "iPhonePlayer (Toms iPhone)". To be able to connect to a player, the player must be launched with the Development Build checkbox found in the Build Settings dialog. From here it is also possible to tick a checkbox to make the Editor and Player Autoconnect at startup.

要 分析你的游戏运行在其他设备上或者在另一台计算机上运行的播放器，可以连接编辑器到其他播放器。Active Profiler下拉菜单显示在本地网络上运行的所有播放器。这些播放器通过播放器的类型和运行播放器的主机名"iPhonePlayer（Toms iPhone）"被识别。要能够连接到一个播放器，播放器必须在 Build Settings对话框中找到Development Build 复选框勾上的情况下打包生成。从这里也可以勾选一个复选框，使编辑器和播放器在启动时自动连接。

Profiler Controls 分析器控件

Profiler controls are in the toolbar at the top of the window. Use these to turn profiling on and off, navigate through profiled frames and so on. The transport controls are at the far right end of the toolbar. Note that when the game is running and the profiler is collecting data clicking on any of these transport controls will pause the game. The controls go to the first recorded frame, step one frame back, step one frame forward and go to the last frame respectively. The profiler does not keep all recorded frames, so the notion of the first frame should really be though of as the oldest frame that is still kept in memory. The "current" transport button causes the profile statistics window to display data collected in real-time. The Active Profiler popup menu allows you to select whether profiling should be done in the editor or a separate player (for example, a game running on an attached iOS device).

分析器控件在窗口顶部的工具栏。使用这些控件打开 和关闭分析，浏览分析好的帧等。传输控件在工具栏的最右端。请注意，当游戏运行、分析器收集数据时，点击任何这些传输控件（那两个小箭头）将暂停游戏。控 件转到记录的第一帧，一步一帧向前(左箭头)​​，一步一帧向后（右箭头），分别去到最后一帧。分析器不保留所有记录的帧，因此第一帧的概念，事实上应该 是仍然保存在内存中的最旧的一帧。 "current"按钮会使得分析统计窗口显示实时采集的数据。激活分析器（Active Profiler）弹出菜单让你选择是否应在编辑器或一个或独立播放器进行分析（例如，一个游戏运行在iOS设备）。

Deep Profiling 深度分析

When you turn on Deep Profile, all your script code is profiled - that is, all function calls are recorded. This is useful to know where exactly time is spent in your game code.

当你打开深度分析（Deep Profile），所有脚本代码将被分析 - 也就是说，所有的函数调用被记录。知道确切在你的游戏代码中花费的时间，这是有用的。

Note that Deep Profiling incurs a very large overhead and uses a lot of memory, and as a result your game will run significantly slower while profiling. If you are using complex script code, Deep Profiling might not be possible at all. Deep profiling should work fast enough for small games with simple scripting. If you find that Deep Profiling for your entire game causes the frame rate to drop so much that the game barely runs, you should consider not using this approach, and instead use the approach described below. You may find deep profiling more helpful as you are designing your game and deciding how to best implement key features. Note that for large games deep profiling may cause Unity to run out of memory and so for this reason deep profiling may not be possible.

注意深度分析 （Deep Profiling）会造成非常大的开销，并使用大量的内存，结果你的游戏在分析同时运行明显变慢。如果您使用的是复杂的脚本代码，深度分析可能不会完全 有效。深度分析为使用简单的脚本的小游戏工作足够快。如果您发现您的整个游戏在深度分析时运行，导致帧速率下降很多，以至于游戏几乎不能运行，你应该考虑 不采用这种方法，而是使用下面描述的方法。您可能会发现深度分析更有利于设计你的游戏，并确定如何最好地实现关键特性。注意深度分析，对于大型游戏可能会 导致Unity耗尽内存，基于这个原因，深度分析未必有效。

Manually profiling blocks of your script code will have a smaller overhead than using Deep Profiling. Use Profiler.BeginSample and Profiler.EndSample scripting functions to enable and disable profiling around sections of code.

手动分析脚本代码块比使用深度分析产生更小的开销。使用Profiler.BeginSample和Profiler.EndSample函数，启用和禁用分析代码段（从Profiler.BeginSample 到Profiler.EndSample间的代码）。

View SyncTime 查看同步时间

When running at a fixed framerate or running in sync with the vertical blank, Unity records the waiting time in "Wait For Target FPS". By default this amount of time is not shown in the profiler. To view how much time is spent waiting, you can toggle "View SyncTime". This is also a measure of how much headroom you have before losing frames.

当运行在一个固定的帧率或带垂直空白同步运行，Unity在"Wait For Target FPS"记录等待时间，默认情况下，该段时间没有显示在分析器。要查看等待花费多少时间，您可以切换"View SyncTime"。这也是衡量多少余量你之前丢失帧。

Profiler Timeline 分析器时间轴

The upper part of the Profiler window displays performance data over time. When you run a game, data is recorded each frame, and the history of the last several hundred frames is displayed. Clicking on a particular frame will display it's details in the lower part of the window. Different details are displayed depending on which timeline area is currently selected.

分析器窗口的上部显示随着时间的推移的性能数据。当您运行游戏，每一帧数据被记录，最后则会显示几百帧的历史。点击一个特定的帧上，该帧的细节将显示在窗口的下部。具体取决于当前选定的时间轴区域显示不同的细节。

The vertical scale of the timeline is managed automatically and will attempt to fill the vertical space of the window. Note that to get more detail in say the CPU Usage area you can remove the Memory and Rendering areas. Also, the splitter between the timeline and the statistics area can be selected and dragged downward to increase the screen area used for the timeline chart.

时间轴的垂直刻度是自 动管理，并尝试填补窗口的垂直空间。请注意，要获得更多关于CPU的使用率(CPU Usage)的细节，您可以删除内存（Memory ）和渲染（Rendering ）区域。此外，时间轴和统计区域之间的分离器能被选择和向下拖动，为时间轴图表增加屏幕面积。

The timeline consists of several areas: CPU Usage, Rendering and Memory. These areas can be removed by clicking the close button in the panel, and re-added again using the Add Area drop down in the Profile Controls bar.

时间轴包括几个方面：CPU使用率，渲染和内存。这些区域可以在面板上按一下关闭按钮删除和 在分析控件（Profile Controls）工具栏中使用Add Area 下拉菜单再次重新添加。

• CPU Usage Area CPU使用率区域
• Rendering Area 渲染区域
• Memory Area 内存区域
• Audio Area 音频区域
• Physics Area 物理学区域
• GPU Area GPU区域

  分析器(仅专业版) Profiler (Pro only)

  Date:2013-07-01 14:17
   

  The Unity Profiler helps you to optimize your game. It reports for you how much time is spent in the various areas of your game. For example, it can report the percentage of time spent rendering, animating or in your game logic.

  Unity分析器可以帮助你优化你的游戏。它为您报告在你的游戏的各个领域所花费的时间。例如，它可以报告渲染、动画或在你的游戏逻辑花费时间的百分比。

  You can play your game in the Editor with Profiling on, and it will record performance data. The Profiler window then displays the data in a timeline, so you can see the frames or areas that spike (take more time) than others. By clicking anywhere in the timeline, the bottom section of the Profiler window will display detailed information for the selected frame.

  在编辑器中，你可以将你的游戏在分析器运行着的状态下运行，它会记录性能数据。 分析器窗口，在时间轴上显示数据，所以你可以看到帧或区域峰值（比其他需要更多的时间）。在时间轴中的任何地方按一下，分析器窗口的底部区域会显示选定的帧的详细信息。

  Note that profiling has to instrument your code. This instrumentation has a small impact on the performance of your game. Typically this overhead is small enough to not affect the game framerate. When using profiling it is typical to consider only the ratio (or percentage) of time spent in certain areas. Also, to improve performance focus on those parts of the game that consume the most time. Compare profiling results before and after code changes and determine the improvements you measure. Sometimes changes you make to improve performance might have a negative effect on frame rate; unexpected consequences of code optimization should be expected.

  请注意，分析时必须检测你的代码。这检 测会对你的游戏性能有小小影响。通常情况下，这种开销是足够小，不会影响游戏的帧率。当使用分析时，它是典型的考虑时间花费在某些领域的比例（或百分 比）。此外，为了提高性能，重点在游戏消耗的时间最多的那些部分。代码更改前后比较分析结果，并确定您测量的改进。有时，您所做的更改来提高性能，可能对 帧速率有负面影响;应预计代码优化的意外的后果。

  • Profiler window 分析器窗口
    • CPU Usage Area CPU使用率区域
    • Rendering Area 渲染区域
    • Memory Area 内存区域
    • Audio Area 音频区域
    • ProfilerPhysics 物理学区域
    • GPU Area GPU区域

  See Also 参见

  • Optimizing Graphics Performance page.
    优化图形性能页面
  iOS

  Remote profiling can be enabled on iOS devices by following these steps:

  iOS设备上启用远程分析可以通过以下步骤：

  1. Connect your iOS device to your WiFi network (local/adhoc WiFi network is used by profiler to send profiling data from device to the Unity Editor).
     您的iOS设备连接到WiFi网络（分析器使用本地/adhoc WiFi网络发送分析数据，从设备到Unity的编辑器）。
  2. Check "Autoconnect Profiler" checkbox in Unity's build settings dialog.
     在Unity的构建设置（build settings）对话框中的，勾上复选框"自动连接分析器（Autoconnect Profiler）"。
  3. Attach your device to your Mac via cable and hit "Build & Run" in Unity Editor.
     通过数据线将您的设备连接到你的Mac，在Unity编辑器中点击"Build ＆Run"。
  4. When app launches on device open profiler window in Unity Editor (Window->Profiler)
     当应用程序在设备上启动，在Unity的编辑器打开分析器窗口（Window->Profiler）

  If you are using a firewall, you need to make sure that ports 54998 to 55511 are open in the firewall's outbound rules - these are the ports used by Unity for remote profiling.

  如果使用了防火墙，你必须确保端口54998 到 55511在防火墙的出站规则被打开。这些端口都是Unity远程分析要使用的端口。

  Note: Sometimes Unity Editor might not autoconnect to the device. In such cases profiler connection might be initiated from Profiler Window Active Profiler drop down menu by select appropriate device.

  注：有时，在Unity的编辑器可能不会自动连接到该设备。在这种情况下，在分析器窗口的Active Profiler下拉菜单选择相应的设备，分析器连接可以主动发起。

  Android

  Remote profiling can be enabled on Android devices through two different paths : WiFi or ADB.

  远程分析可以在Android设备通过两种不同的途径启用：WiFi或ADB。

  For WiFi profiling, follow these steps:

  对于WiFi分析，用下列的这些步骤：

  1. Make sure to disable Mobile Data on your Android device.
     确保在Andriod设备禁用手机数据。
  2. Connect your Android device to your WiFi network.
     连接Android设备到你的Wifi网络。
  3. Check the "Autoconnect Profiler" checkbox in Unity's build settings dialog.
     在Unity编译设置对话框，检查Autoconnect Profiler复选框是否勾选。
  4. Attach your device to your Mac/PC via cable and hit "Build & Run" in Unity Editor.
     通过数据线连接你的设备到电脑，在Unity点击Build & Run。
  5. When the app launches on the device, open the profiler window in Unity Editor (Window->Profiler)
     当应用程序在设备上启动，在Unity打开分析器窗口（Window->Profiler）。
  6. If the Unity Editor fails to autoconnect to the device, select the appropriate device from the Profiler Window Active Profiler drop down menu.
     如果Unity无法自动连接到该设备，从分析器窗口Active Profiler下拉菜单，选择相应的设备。

  Note: The Android device and host computer (running the Unity Editor) must both be on the same subnet for the device detection to work.

  注意：Android设备和主机计算机（正运行Unity）必须两者在同一子网，才能正常运行设备检测工作。

  For ADB profiling, follow these steps:

  对于ADB分析，用下列的这些步骤：

  • Attach your device to your Mac/PC via cable and make sure ADB recognizes the device (i.e. it shows in adb devices list).
    通过数据线连接设备到电脑，并确保ADB设备设备（也就是说它显示在ADB设备列表）。
  • Open a Terminal window / CMD prompt and enter
    打开一个终端窗口/ CMD提示符并输入

  adb forward tcp:54999 localabstract:Unity-<insert bundle identifier here>

  • Check the "Development Build" checkbox in Unity's build settings dialog, and hit "Build & Run".
    在Unity编译设置对话框，检查Development Build复选框是否勾选，并点击Build & Run。
  • When the app launches on the device, open the profiler window in Unity Editor (Window->Profiler)
    当应用程序在设备上启动，在Unity打开分析器窗口（Window->Profiler）。
  • Select the AndroidProfiler(ADB@127.0.0.1:54999) from the Profiler Window Active Profiler drop down menu.
    从分析器窗口Active Profiler下拉菜单选择AndroidProfiler(ADB@127.0.0.1:54999)

  Note: The entry in the drop down menu is only visible when the selected target is Android.

  注意：进入下拉菜单，当选择目标是Android唯一可见时选择。

  If you are using a firewall, you need to make sure that ports 54998 to 55511 are open in the firewall's outbound rules - these are the ports used by Unity for remote profiling.

  如果使用了防火墙，你必须确保端口54998 到 55511在防火墙的出站规则被打开。这些端口都是Unity远程分析要使用的端口。