TSC 条码打印机 Dll 说明

请于使用TSCLIB.DLL前，安装条形码打印机驱动程序。

1.  openp*t(a)

说明: 指定计算机端的输出端口

参数:

a: 单机打印时，请指定打印机驱动程序名称，例如: TSC CLEVER TTP-243

   若连接打印机服务器，请指定服务器路径及共享打印机名称，例如: \\SERVER\TTP243

 

2.  closep*t()

说明: 关闭指定的计算机端输出端口

参数: 无

 

3. setup(a,b,c,d,e,f,g)

说明: 设定卷标的宽度、高度、打印速度、打印浓度、感应器类别、gap/black mark 垂直间距、gap/black mark 偏移距离)

参数:

a: 字符串型别，设定卷标宽度，单位 mm

       b: 字符串型别，设定卷标高度，单位 mm

       c: 字符串型别，设定打印速度，(打印速度随机型不同而有不同的选项)

                            1.0: 每秒1.0吋打印速度

                            1.5: 每秒1.5吋打印速度

                            2.0: 每秒2.0吋打印速度

                            3.0: 每秒3.0吋打印速度

                            4.0: 每秒4.0吋打印速度

                            5.0: 每秒5.0吋打印速度

                            6.0: 每秒6.0吋打印速度

       d: 字符串型别，设定打印浓度，

0~15，数字愈大打印结果愈黑

       e: 字符串型别，设定使用感应器类别

0 表示使用垂直间距传感器(gap sens*)

1 表示使用黑标传感器(black mark sens*)

f: 字符串型别，设定gap/black mark 垂直间距高度，单位: mm

g: 字符串型别，设定gap/black mark 偏移距离，单位: mm，此参数若使用一般卷标时均设为0

 

 

4.      clearbuffer()

说明: 清除

参数: 无

 

5.      barcode(a,b,c,d,e,f,g,h,I)

说明: 使用条形码机内建条形码打印

参数:

a: 字符串型别，条形码X方向起始点，以点(point)表示。

(200 DPI，1点=1/8 mm, 300 DPI，1点=1/12 mm)

b: 字符串型别，条形码Y方向起始点，以点(point)表示。

(200 DPI，1点=1/8 mm, 300 DPI，1点=1/12 mm)

c: 字符串型别，

128 Code 128, switching code subset A, B, C

automatically

128M Code 128, switching code subset A, B, C

manually.

EAN128 Code 128, switching code subset A, B, C

automatically

                     25                        Interleaved 2 of 5

                     25C                            Interleaved 2 of 5 with check digits

                     39                        Code 39

                     39C                            Code 39 with check digits

                     93                        Code 93

                     EAN13               EAN 13

                     EAN13+2            EAN 13 with 2 digits add-on

                     EAN13+5            EAN 13 with 5 digits add-on

                     EAN8                  EAN 8

     EAN8+2             EAN 8 with 2 digits add-on

                     EAN8+5                     EAN 8 with 5 digits add-on

                     CODA                Codabar

                     POST                 Postnet

                     UPCA                 UPC-A

                     UPCA+2                     UPC-A with 2 digits add-on

                     UPCA+5                     UPC-A with 5 digits add-on

                     UPCE                 UPC-E

                     UPCE+2                     UPC-E with 2 digits add-on

                     UPCE+5                     UPC-E with 5 digits add-on

 

       d: 字符串型别，设定条形码高度，高度以点来表示

       e: 字符串型别，设定是否打印条形码码文

              0: 不打印码文

              1: 打印码文

       f: 字符串型别，设定条形码旋转角度

              0: 旋转0度

              90: 旋转90度

              180: 旋转180度

              270: 旋转270度

       g: 字符串型别，设定条形码窄bar 比例因子，请参考TSPL使用手册

       h: 字符串型别，设定条形码窄bar 比例因子，请参考TSPL使用手册

       I: 字符串型别，条形码内容

 

6.      printerfont(a,b,c,d,e,f,g)

说明: 使用条形码机内建文字打印

参数:

a: 字符串型别，文字X方向起始点，以点(point)表示。

(200 DPI，1点=1/8 mm, 300 DPI，1点=1/12 mm)

b: 字符串型别，文字Y方向起始点，以点(point)表示。

(200 DPI，1点=1/8 mm, 300 DPI，1点=1/12 mm)

      c: 字符串型别，内建字型名称，共12种。

      1: 8*/12 dots

      2: 12*20 dots

      3: 16*24 dots

      4: 24*32 dots

      5: 32*48 dots

      TST24.BF2: 繁体中文24*24

      TST16.BF2: 繁体中文16*16

      TTT24.BF2: 繁体中文24*24 (电信码)

      TSS24.BF2: 简体中文24*24

      TSS16.BF2: 简体中文16*16

      K: 韩文 24*24

      L: 韩文 16*16

d: 字符串型别，设定文字旋转角度

              0: 旋转0度

              90: 旋转90度

              180: 旋转180度

              270: 旋转270度

e: 字符串型别，设定文字X方向放大倍率，1~8

f: 字符串型别，设定文字X方向放大倍率，1~8

g: 字符串型别，打印文字内容

 

7.      sendcommand(command)

说明: 送内建指令到条形码打印机

参数: 详细指令请参考TSPL

 

8.      printlabel(a,b)

说明: 打印卷标内容

参数:

       a: 字符串型别，设定打印卷标式数(set)

       b: 字符串型别，设定打印卷标份数(copy)

 

9.      downloadpcx(a,b)

说明:下载单色PCX 格式图文件至打印机

参数:

       a: 字符串型别，文件名(可包含路径)

       b: 字符串型别，下载至打印机内存内之文件名(请使用大写档名)

 

10. f*mfeed()

说明: 跳页，该函式需在setup后使用

参数: 无

 

11. nobackfeed()

说明: 设定纸张不回吐

参数: 无

 

12. windowsfont(a,b,c,d,e,f,g,h)

说明: 使用Windows TTF字型打印文字

参数:

a: 整数型别，文字X方向起始点，以点(point)表示。

b: 整数型别，文字Y方向起始点，以点(point)表示。

c: 整数型别，字体高度，以点(point)表示。

d: 整数型别，旋转角度，逆时钟方向旋转

0 ->  0 degree

90-> 90 degree

180-> 180 degree

270-> 270 degree

e: 整数型别，字体外形

0-> 标准(N*mal)

1-> 斜体(Italic)

2-> 粗体(Bold)

3-> 粗斜体(Bold and Italic)

f: 整数型别, 底线

0-> 无底线

1-> 加底线

g: 字符串型别，字体名称。如: Arial, Times new Roman, 细名体, 标楷体

h: 字符串型别，打印文字内容。

 

13. about()

说明: 显示DLL 版本号码

参数: 无

Visual Basic 5.0, 6.0 f* Win95, 98范例

 

Private Declare Sub openp*t Lib "c:\windows\system\tsclib.dll" (

ByVal PrinterName As String)

Private Declare Sub closep*t Lib "c:\windows\system\tsclib.dll" ()

Private Declare Sub sendcommand Lib "c:\windows\system\tsclib.dll" ( _

                                    ByVal command As String)

Private Declare Sub setup Lib "c:\windows\system\tsclib.dll" ( _

                                    ByVal LabelWidth As String, _

                                    ByVal LabelHeight As String, _

                                    ByVal Speed As String, _

                                    ByVal Density As String, _

                                    ByVal Sens* As String, _

                                    ByVal Vertical As String, _

                                    ByVal Offset As String)

Private Declare Sub downloadpcx Lib "c:\windows\system\tsclib.dll" ( _

                                    ByVal Filename As String, _

                                    ByVal ImageName As String)

Private Declare Sub barcode Lib "c:\windows\system\tsclib.dll" ( _

                                    ByVal X As String, _

                                    ByVal Y As String, _

                                    ByVal CodeType As String, _

                                    ByVal Height As String, _

                                    ByVal Readable As String, _

                                    ByVal rotation As String, _

                                    ByVal Narrow As String, _

                                    ByVal Wide As String, _

                                    ByVal Code As String)

Private Declare Sub printerfont Lib "c:\windows\system\tsclib.dll" ( _

                                    ByVal X As String, _

                                    ByVal Y As String, _

                                    ByVal FontName As String, _

                                    ByVal rotation As String, _

                                    ByVal Xmul As String, _

                                    ByVal Ymul As String, _

                                    ByVal Content As String)

Private Declare Sub clearbuffer Lib "c:\windows\system\tsclib.dll" ()

Private Declare Sub printlabel Lib "c:\windows\system\tsclib.dll" ( _

                                    ByVal NumberOfSet As String, _

                                    ByVal NumberOfCopy As String)

Private Declare Sub f*mfeed Lib "c:\windows\system\tsclib.dll" ()

Private Declare Sub nobackfeed Lib "c:\windows\system\tsclib.dll" ()

Private Declare Sub windowsfont Lib "c:\windows\system\tsclib.dll" ( _

                                    ByVal X As Integer, _

                                    ByVal Y As Integer, _

                                    ByVal fontheight As Integer, _

                                    ByVal rotation As Integer, _

                                    ByVal fontstyle As Integer, _

                                    ByVal fontunderline As Integer, _

                                    ByVal FaceName As String, _

                                    ByVal TextContent As String)

 

 

Private Sub Command1_Click()

Call openp*t(“TSC CLEVER TTP-243”)

‘Call openp*t(“\\server\TTP243”)

Call setup("100", "100", "3", "10", "0", "0", "0")

Call clearbuffer

Call downloadpcx("c:\UL.PCX", "UL.PCX")

Call printerfont("10", "10", "4", "0", "1", "1", "TEST PRINTOUT")

Call barcode("10", "80", "39", "96", "1", "0", "2", "4", "0987654321")

Call sendcommand("PUTPCX 100,250,""UL.PCX""")

Call sendcommand("BAR 400,200,300,100")

Call sendcommand("BOX 10,300,300,300,5")

Call windowsfont(10, 500, 80, 0, 0,0, "标楷体", "标楷体字型")

Call printlabel("1", "1")

Call closep*t

End Sub

 FoxPro 范例

declare openp*t in c:\windows\system\tsclib.dll string

declare closep*t in c:\windows\system\tsclib.dll

declare sendcommand in c:\windows\system\tsclib.dll

declare setup in c:\windows\system\tsclib.dll

 string,string,string,string,string,string,string

declare downloadpcx in c:\windows\system\tsclib.dll

                      string, string

declare barcode in c:\windows\system\tsclib.dll

 string,string,string,string,string,string,string,string,string

declare printerfont in c:\windows\system\tsclib.dll

                      string,string,string,string,string,string,string

 

declare clearbuffer in c:\windows\system\tsclib.dll

declare printlabel in c:\windows\system\tsclib.dll string,string

declare f*mfeed in c:\windows\system\tsclib.dll

declare nobackfeed in c:\windows\system\tsclib.dll

declare windowsfont in c:\windows\system\tsclib.dll

integer,integer,integer,integer,integer,integer,integer,string,string

 

 

openp*t(“TSC CLEVER TTP-243”)

setup("32","25","2","10","0","0","0")

clearbuffer()

barcode("10","0","EAN13","80","1","0","2","4","123456789012")

windowsfont(10,100,50,0,0,0,"标楷体","标楷体字型")

printlabel("1","1")

closep*t()

Delphi 宣告范例

procedure openp*t(PrinterName:pchar);stdcall;far; external ‘tsclib.dll’;

procedure closep*t; external ‘tsclib.dll’;

procedure sendcommand(Command:pchar);stdcall;far;external ‘tsclib.dll’;

procedure setup(LabelWidth, LabelHeight, Speed, Density, Sens*, Vertical,

   Offset:pchar);tsdcall; far; external ‘tsclib.dll’;

procedure downloadpcx(Filename,ImageName:pchar);stdcall;far;

  external ‘tsclib.dll’;

procedure barcode(X, Y, CodeType, Height, Readable, Rotation, Narrow,

 Wide, Code :pchar); stdcall; far; external ‘tsclib.dll’;

procedure printerfont(X, Y, FontName, Rotation, Xmul, Ymul, Content:pchar);

stdcall;far; external ‘tsclib.dll’;

procedure clearbuffer; external ‘tsclib.dll’;

procedure printlabel(NumberOfSet, NumberOfCopoy:pchar);stdcall; far;

  external ‘tsclib.dll’;

procedure f*mfeed;external ‘tsclib.dll’;

procedure nobackfeed; external ‘tsclib.dll’

procedure windowsfont (X, Y, FontHeight, Rotation, FontStyle,

  FontUnderline : integer; FaceName,

  TextContect:pchar);stdcall;far;external ‘tsclib.dll’;

 

请注意: 函数名称务必使用小写字母