zoukankan      html  css  js  c++  java
  • (一)安装samba

    实际上日常使用中,经常用\ip地址目录来访问局域网的共享文件,这都归功于smb协议

    SMB(Server Message Block)通信协议是微软(Microsoft)和英特尔(Intel)在1987年制定的协议,主要是作为Microsoft网络的通讯协议。SMB 是在会话层(session layer)和表示层(presentation layer)以及小部分应用层(application layer)的协议。


    详细见smb百科


    samba是linux对smb协议的一种实现

    Samba是在Linux和UNIX系统上实现SMB协议的一个免费软件,由服务器及客户端程序构成。SMB(Server Messages Block,信息服务块)是一种在局域网上共享文件和打印机的一种通信协议,它为局域网内的不同计算机之间提供文件及打印机等资源的共享服务。SMB协议是客户机/服务器型协议,客户机通过该协议可以访问服务器上的共享文件系统、打印机及其他资源。通过设置“NetBIOS over TCP/IP”使得Samba不但能与局域网络主机分享资源,还能与全世界的电脑分享资源。


    详细见samba百科

    安装samba

    yum install samba samba-client -y

     安装完后就可以在/etc/samba下找到samba的配置,详细的配置可以参考smb.conf.example

    # This is the main Samba configuration file. For detailed information about the
    # options listed here, refer to the smb.conf(5) manual page. Samba has a huge
    # number of configurable options, most of which are not shown in this example.
    #
    # The Samba Wiki contains a lot of step-by-step guides installing, configuring,
    # and using Samba:
    # https://wiki.samba.org/index.php/User_Documentation
    #
    # In this file, lines starting with a semicolon (;) or a hash (#) are
    # comments and are ignored. This file uses hashes to denote commentary and
    # semicolons for parts of the file you may wish to configure.
    #
    # NOTE: Run the "testparm" command after modifying this file to check for basic
    # syntax errors.
    #
    #---------------
    # Security-Enhanced Linux (SELinux) Notes:
    #
    # Turn the samba_domain_controller Boolean on to allow a Samba PDC to use the
    # useradd and groupadd family of binaries. Run the following command as the
    # root user to turn this Boolean on:
    # setsebool -P samba_domain_controller on
    #
    # Turn the samba_enable_home_dirs Boolean on if you want to share home
    # directories via Samba. Run the following command as the root user to turn this
    # Boolean on:
    # setsebool -P samba_enable_home_dirs on
    #
    # If you create a new directory, such as a new top-level directory, label it
    # with samba_share_t so that SELinux allows Samba to read and write to it. Do
    # not label system directories, such as /etc/ and /home/, with samba_share_t, as
    # such directories should already have an SELinux label.
    #
    # Run the "ls -ldZ /path/to/directory" command to view the current SELinux
    # label for a given directory.
    #
    # Set SELinux labels only on files and directories you have created. Use the
    # chcon command to temporarily change a label:
    # chcon -t samba_share_t /path/to/directory
    #
    # Changes made via chcon are lost when the file system is relabeled or commands
    # such as restorecon are run.
    #
    # Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
    # directories. To share such directories and only allow read-only permissions:
    # setsebool -P samba_export_all_ro on
    # To share such directories and allow read and write permissions:
    # setsebool -P samba_export_all_rw on
    #
    # To run scripts (preexec/root prexec/print command/...), copy them to the
    # /var/lib/samba/scripts/ directory so that SELinux will allow smbd to run them.
    # Note that if you move the scripts to /var/lib/samba/scripts/, they retain
    # their existing SELinux labels, which may be labels that SELinux does not allow
    # smbd to run. Copying the scripts will result in the correct SELinux labels.
    # Run the "restorecon -R -v /var/lib/samba/scripts" command as the root user to
    # apply the correct SELinux labels to these files.
    #
    #--------------
    #
    #======================= Global Settings =====================================
    
    [global]
    
    # ----------------------- Network-Related Options -------------------------
    #
    # workgroup = the Windows NT domain name or workgroup name, for example, MYGROUP.
    #
    # server string = the equivalent of the Windows NT Description field.
    #
    # netbios name = used to specify a server name that is not tied to the hostname,
    #                maximum is 15 characters.
    #
    # interfaces = used to configure Samba to listen on multiple network interfaces.
    # If you have multiple interfaces, you can use the "interfaces =" option to
    # configure which of those interfaces Samba listens on. Never omit the localhost
    # interface (lo).
    #
    # hosts allow = the hosts allowed to connect. This option can also be used on a
    # per-share basis.
    #
    # hosts deny = the hosts not allowed to connect. This option can also be used on
    # a per-share basis.
    #
        workgroup = MYGROUP
        server string = Samba Server Version %v
    
    ;    netbios name = MYSERVER
    
    ;    interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
    ;    hosts allow = 127. 192.168.12. 192.168.13.
    
    # --------------------------- Logging Options -----------------------------
    #
    # log file = specify where log files are written to and how they are split.
    #
    # max log size = specify the maximum size log files are allowed to reach. Log
    # files are rotated when they reach the size specified with "max log size".
    #
    
        # log files split per-machine:
        log file = /var/log/samba/log.%m
        # maximum size of 50KB per log file, then rotate:
        max log size = 50
    
    # ----------------------- Standalone Server Options ------------------------
    #
    # security = the mode Samba runs in. This can be set to user, share
    # (deprecated), or server (deprecated).
    #
    # passdb backend = the backend used to store user information in. New
    # installations should use either tdbsam or ldapsam. No additional configuration
    # is required for tdbsam. The "smbpasswd" utility is available for backwards
    # compatibility.
    #
    
        security = user
        passdb backend = tdbsam
    
    
    # ----------------------- Domain Members Options ------------------------
    #
    # security = must be set to domain or ads.
    #
    # passdb backend = the backend used to store user information in. New
    # installations should use either tdbsam or ldapsam. No additional configuration
    # is required for tdbsam. The "smbpasswd" utility is available for backwards
    # compatibility.
    #
    # realm = only use the realm option when the "security = ads" option is set.
    # The realm option specifies the Active Directory realm the host is a part of.
    #
    # password server = only use this option when the "security = server"
    # option is set, or if you cannot use DNS to locate a Domain Controller. The
    # argument list can include My_PDC_Name, [My_BDC_Name], and [My_Next_BDC_Name]:
    #
    # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
    #
    # Use "password server = *" to automatically locate Domain Controllers.
    
    ;    security = domain
    ;    passdb backend = tdbsam
    ;    realm = MY_REALM
    
    ;    password server = <NT-Server-Name>
    
    # ----------------------- Domain Controller Options ------------------------
    #
    # security = must be set to user for domain controllers.
    #
    # passdb backend = the backend used to store user information in. New
    # installations should use either tdbsam or ldapsam. No additional configuration
    # is required for tdbsam. The "smbpasswd" utility is available for backwards
    # compatibility.
    #
    # domain master = specifies Samba to be the Domain Master Browser, allowing
    # Samba to collate browse lists between subnets. Do not use the "domain master"
    # option if you already have a Windows NT domain controller performing this task.
    #
    # domain logons = allows Samba to provide a network logon service for Windows
    # workstations.
    #
    # logon script = specifies a script to run at login time on the client. These
    # scripts must be provided in a share named NETLOGON.
    #
    # logon path = specifies (with a UNC path) where user profiles are stored.
    #
    #
    ;    security = user
    ;    passdb backend = tdbsam
    
    ;    domain master = yes
    ;    domain logons = yes
    
        # the following login script name is determined by the machine name
        # (%m):
    ;    logon script = %m.bat
        # the following login script name is determined by the UNIX user used:
    ;    logon script = %u.bat
    ;    logon path = \%LProfiles\%u
        # use an empty path to disable profile support:
    ;    logon path =
    
        # various scripts can be used on a domain controller or a stand-alone
        # machine to add or delete corresponding UNIX accounts:
    
    ;    add user script = /usr/sbin/useradd "%u" -n -g users
    ;    add group script = /usr/sbin/groupadd "%g"
    ;    add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
    ;    delete user script = /usr/sbin/userdel "%u"
    ;    delete user from group script = /usr/sbin/userdel "%u" "%g"
    ;    delete group script = /usr/sbin/groupdel "%g"
    
    
    # ----------------------- Browser Control Options ----------------------------
    #
    # local master = when set to no, Samba does not become the master browser on
    # your network. When set to yes, normal election rules apply.
    #
    # os level = determines the precedence the server has in master browser
    # elections. The default value should be reasonable.
    #
    # preferred master = when set to yes, Samba forces a local browser election at
    # start up (and gives itself a slightly higher chance of winning the election).
    #
    ;    local master = no
    ;    os level = 33
    ;    preferred master = yes
    
    #----------------------------- Name Resolution -------------------------------
    #
    # This section details the support for the Windows Internet Name Service (WINS).
    #
    # Note: Samba can be either a WINS server or a WINS client, but not both.
    #
    # wins support = when set to yes, the NMBD component of Samba enables its WINS
    # server.
    #
    # wins server = tells the NMBD component of Samba to be a WINS client.
    #
    # wins proxy = when set to yes, Samba answers name resolution queries on behalf
    # of a non WINS capable client. For this to work, there must be at least one
    # WINS server on the network. The default is no.
    #
    # dns proxy = when set to yes, Samba attempts to resolve NetBIOS names via DNS
    # nslookups.
    
    ;    wins support = yes
    ;    wins server = w.x.y.z
    ;    wins proxy = yes
    
    ;    dns proxy = yes
    
    # --------------------------- Printing Options -----------------------------
    #
    # The options in this section allow you to configure a non-default printing
    # system.
    #
    # load printers = when set you yes, the list of printers is automatically
    # loaded, rather than setting them up individually.
    #
    # cups options = allows you to pass options to the CUPS library. Setting this
    # option to raw, for example, allows you to use drivers on your Windows clients.
    #
    # printcap name = used to specify an alternative printcap file.
    #
    
        load printers = yes
        cups options = raw
    
    ;    printcap name = /etc/printcap
        # obtain a list of printers automatically on UNIX System V systems:
    ;    printcap name = lpstat
    ;    printing = cups
    
    # --------------------------- File System Options ---------------------------
    #
    # The options in this section can be un-commented if the file system supports
    # extended attributes, and those attributes are enabled (usually via the
    # "user_xattr" mount option). These options allow the administrator to specify
    # that DOS attributes are stored in extended attributes and also make sure that
    # Samba does not change the permission bits.
    #
    # Note: These options can be used on a per-share basis. Setting them globally
    # (in the [global] section) makes them the default for all shares.
    
    ;    map archive = no
    ;    map hidden = no
    ;    map read only = no
    ;    map system = no
    ;    store dos attributes = yes
    
    
    #============================ Share Definitions ==============================
    
    [homes]
        comment = Home Directories
        browseable = no
        writable = yes
    ;    valid users = %S
    ;    valid users = MYDOMAIN\%S
    
    [printers]
        comment = All Printers
        path = /var/spool/samba
        browseable = no
        guest ok = no
        writable = no
        printable = yes
    
    # Un-comment the following and create the netlogon directory for Domain Logons:
    ;    [netlogon]
    ;    comment = Network Logon Service
    ;    path = /var/lib/samba/netlogon
    ;    guest ok = yes
    ;    writable = no
    ;    share modes = no
    
    # Un-comment the following to provide a specific roaming profile share.
    # The default is to use the user's home directory:
    ;    [Profiles]
    ;    path = /var/lib/samba/profiles
    ;    browseable = no
    ;    guest ok = yes
    
    # A publicly accessible directory that is read only, except for users in the
    # "staff" group (which have write permissions):
    ;    [public]
    ;    comment = Public Stuff
    ;    path = /home/samba
    ;    public = yes
    ;    writable = no
    ;    printable = no
    ;    write list = +staff
    View Code

    简单的用起来,实际上就是能访问共享文件夹,控制用户可读可写就可以了

    针对用户,此处就不赘述,只提供一个简单的demo,编辑配置文件

    vim smb.conf

    中括号:共享目录名

    comment:描述

    path:共享目录的绝对路径

    read only:是否只读

    添加好保存就可以在用了

  • 相关阅读:
    滴水穿石Pydoop 架构和模块包介绍
    滴水穿石SSH Secure Shell Client安装和使用
    安装memcache到CentOS(另附yum法)
    php文件锁(转)
    MySQL中distinct和group by性能比较
    php中的自动加载
    php注释标准
    新浪API40310错误解决方法
    CentOS 5.5使用yum来安装LAMP(php运行环境)(转)
    MySQL优化之COUNT()效率
  • 原文地址:https://www.cnblogs.com/zqyx/p/12599558.html
Copyright © 2011-2022 走看看