一、实验目的
熟悉 Postman 的使用;熟悉如何使用 OpenDaylight 通过 Postman 下发流表。
二、实验任务
流表有软超时和硬超时的概念,分别对应流表中的 idle_timeout 和 hard_timeout。
- idle timeout: 如果值为非 0,那么在对应的时间内如果没有数据包匹配流表,时间到该流表将被删除; 值为 0 不设软超时机制。
- hard timeout: 如果值为非 0,那么在对应的时间内不论是否有数据包匹配流表,时间到流表都会被删除; 值为 0 不设硬超时机制。
本实验通过 OpenDaylight 及 Postman 下发关于硬超时的流表,实现拓扑内主机h1 和 h3 在一定时间内的网络断开。实验拓扑如下:
三、 实验步骤
1. 实验环境
安装了 Ubuntu 18.04.5 Desktop amd64 的虚拟机
2. 实验过程
(1) Postman 安装
(2) 清理旧数据
* 启动 OpenDaylight,通过 Postman 的 Delete 动作清空残留流表(如有)
- 清空 Mininet 数据
$ sudo mn -c
(3) 生成拓扑并连接 OpenDaylight
$ sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13
(4)使用 Postman 填入 JSON 格式的 http 请求
先在 Mininet CLI 中运行 h1 ping h3, 再在 Postman 处选择动作 PUT,填入硬超时流表内容,为了让流表能
够匹配,将优先级 priority 调到最大。 点击右上角 send,发送请求。
http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flownode-inventory:table/0/flow/1
{
"flow": [
{
"id": "1",
"match": {
"in-port": "1",
"ethernet-match": {
"ethernet-type": {
"type": "0x0800"
}
},
"ipv4-destination": "10.0.0.3/32"
},
"instructions": {
"instruction": [
{
"order": "0",
"apply-actions": {
"action": [
{
"order": "0",
"drop-action": {}
}
]
}
}
]
},
"flow-name": "flow1",
"priority": "65535",
"hard-timeout": "10",
"cookie": "2",
"table_id": "0"
}
]
}
(5)验证结果
h1 ping h3 有 10 秒时间是中断的,结果符合预期。