1.下载JavaServer Wrapper
2.在本地创建一个目录并创建文件夹
3.复制wraper 中src/bin目录下的App.bat.in，UninstallApp-NT.bat.in，InstallApp-NT.bat.in，复制wraper/bin 下的wrapper.exe ----》 都放在自建目录bin,并删除.in后缀 ，复制wrapper/conf 下的wrapper.conf 和wrapper-license.conf 到自建conf目录，复制wrapper/lib下的wrapper.ddl和wrapper.jar---》到自建目录lib，在把springBoot打包的jar放到此目录
注：需要注意的是下载的wrapper是不是破解版，Java Service Wrapper分为Professional、Standard、Community三个版本，并支持32位和64位的系统，其中Community版本为免费的社区版本
4.做完以上步骤就可以安装服务了
UninstallApp-NT.bat，InstallApp-NT.bat 卸载和安装，运行之前先看配置项
5.wrapper.conf文件配置
主要是springboot主类加载和javaee有所区别
#encoding=UTF-8 # Configuration files must begin with a line specifying the encoding # of the the file. # # NOTE - Please use src/conf/wrapper.conf.in as a template for your # own application rather than the values used for the # TestWrapper sample. #******************************************************************** # Wrapper License Properties (Ignored by Community Edition) #******************************************************************** # Professional and Standard Editions of the Wrapper require a valid # License Key to start. Licenses can be purchased or a trial license # requested on the following pages: # http://wrapper.tanukisoftware.com/purchase # http://wrapper.tanukisoftware.com/trial # Include file problems can be debugged by leaving only one '#' # at the beginning of the following line: ##include.debug # The Wrapper will look for either of the following optional files for a # valid License Key. License Key properties can optionally be included # directly in this configuration file. #include ../conf/wrapper-license.conf #include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf # The following property will output information about which License Key(s) # are being found, and can aid in resolving any licensing problems. #wrapper.license.debug=TRUE #******************************************************************** # Wrapper Localization #******************************************************************** # Specify the language and locale which the Wrapper should use. #wrapper.lang=en_US # en_US or ja_JP # Specify the location of the language resource files (*.mo). wrapper.lang.folder=../lang #******************************************************************** # Wrapper Java Properties #******************************************************************** # Java Application # Locate the java binary on the system PATH: wrapper.java.command=java # Specify a specific java binary: #set.JAVA_HOME=/java/path #wrapper.java.command=%JAVA_HOME%/bin/java # Tell the Wrapper to log the full generated Java command line. #wrapper.java.command.loglevel=INFO # Java Main class. This class must implement the WrapperListener interface # or guarantee that the WrapperManager class is initialized. Helper # classes are provided to do this for you. # See the following page for details: # http://wrapper.tanukisoftware.com/doc/english/integrate.html wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp # Java Classpath (include wrapper.jar) Add class path elements as # needed starting from 1 # 这里配置项目中用到的jar wrapper.java.classpath.2=../lib/wrapper.jar wrapper.java.classpath.3=../lib/javaservice.jar # Java Library Path (location of Wrapper.DLL or libwrapper.so) wrapper.java.library.path.1=../lib # Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode. wrapper.java.additional.auto_bits=TRUE # Java Additional Parameters wrapper.java.additional.1= # Initial Java Heap Size (in MB) #wrapper.java.initmemory=3 # Maximum Java Heap Size (in MB) #wrapper.java.maxmemory=64 # Application parameters. Add parameters as needed starting from 1 # SpringBoot主类配置 wrapper.app.parameter.1=org.springframework.boot.loader.JarLauncher #******************************************************************** # Wrapper Logging Properties #******************************************************************** # Enables Debug output from the Wrapper. # wrapper.debug=TRUE # Format of output for the console. (See docs for formats) wrapper.console.format=PM # Log Level for console output. (See docs for log levels) wrapper.console.loglevel=INFO # Log file to use for wrapper output logging. # 文件名 wrapper.logfile=../logs/wrapper.YYYYMMDD.log # Format of output for the log file. (See docs for formats) wrapper.logfile.format=LPTM # 日志类型每天输入一个文件 wrapper.logfile.rollmode=DATE # Log Level for log file output. (See docs for log levels) wrapper.logfile.loglevel=INFO # Maximum size that the log file will be allowed to grow to before # the log is rolled. Size is specified in bytes. The default value # of 0, disables log rolling. May abbreviate with the 'k' (kb) or # 'm' (mb) suffix. For example: 10m = 10 megabytes. wrapper.logfile.maxsize=0 # Maximum number of rolled log files which will be allowed before old # files are deleted. The default value of 0 implies no limit. wrapper.logfile.maxfiles=0 # Log Level for sys/event log output. (See docs for log levels) wrapper.syslog.loglevel=NONE #******************************************************************** # Wrapper General Properties #******************************************************************** # Allow for the use of non-contiguous numbered properties wrapper.ignore_sequence_gaps=TRUE # Do not start if the pid file already exists. wrapper.pidfile.strict=TRUE # Title to use when running as a console wrapper.console.title=title #******************************************************************** # Wrapper JVM Checks #******************************************************************** # Detect DeadLocked Threads in the JVM. (Requires Standard Edition) wrapper.check.deadlock=TRUE wrapper.check.deadlock.interval=10 wrapper.check.deadlock.action=RESTART wrapper.check.deadlock.output=FULL # Out Of Memory detection. # (Ignore output from dumping the configuration to the console. This is only needed by the TestWrapper sample application.) wrapper.filter.trigger.999=wrapper.filter.trigger.*java.lang.OutOfMemoryError wrapper.filter.allow_wildcards.999=TRUE wrapper.filter.action.999=NONE # Ignore -verbose:class output to avoid false positives. wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError wrapper.filter.action.1000=NONE # (Simple match) wrapper.filter.trigger.1001=java.lang.OutOfMemoryError # (Only match text in stack traces if -XX:+PrintClassHistogram is being used.) #wrapper.filter.trigger.1001=Exception in thread "*" java.lang.OutOfMemoryError #wrapper.filter.allow_wildcards.1001=TRUE wrapper.filter.action.1001=RESTART wrapper.filter.message.1001=The JVM has run out of memory. #******************************************************************** # Wrapper Email Notifications. (Requires Professional Edition) #******************************************************************** # Common Event Email settings. #wrapper.event.default.email.debug=TRUE #wrapper.event.default.email.smtp.host=<SMTP_Host> #wrapper.event.default.email.smtp.port=25 #wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification #wrapper.event.default.email.sender=<Sender email> #wrapper.event.default.email.recipient=<Recipient email> # Configure the log attached to event emails. #wrapper.event.default.email.maillog=ATTACHMENT #wrapper.event.default.email.maillog.lines=50 #wrapper.event.default.email.maillog.format=LPTM #wrapper.event.default.email.maillog.loglevel=INFO # Enable specific event emails. #wrapper.event.wrapper_start.email=TRUE #wrapper.event.jvm_prelaunch.email=TRUE #wrapper.event.jvm_start.email=TRUE #wrapper.event.jvm_started.email=TRUE #wrapper.event.jvm_deadlock.email=TRUE #wrapper.event.jvm_stop.email=TRUE #wrapper.event.jvm_stopped.email=TRUE #wrapper.event.jvm_restart.email=TRUE #wrapper.event.jvm_failed_invocation.email=TRUE #wrapper.event.jvm_max_failed_invocations.email=TRUE #wrapper.event.jvm_kill.email=TRUE #wrapper.event.jvm_killed.email=TRUE #wrapper.event.jvm_unexpected_exit.email=TRUE #wrapper.event.wrapper_stop.email=TRUE # Specify custom mail content wrapper.event.jvm_restart.email.body=The JVM was restarted. Please check on its status. #******************************************************************** # Wrapper Windows Service Properties #******************************************************************** # WARNING - Do not modify any of these properties when an application # using this configuration file has been installed as a service. # Please uninstall the service before modifying this section. The # service can then be reinstalled. # Name of the service wrapper.name=JavaService # Display name of the service # wrapper.displayname=@app.long.name@ wrapper.displayname=JavaService # Description of the service # 服务描述 wrapper.description=Java service transit program # Service dependencies. Add dependencies as needed starting from 1 wrapper.ntservice.dependency.1= # Mode in which the service is installed. AUTO_START, DELAY_START or DEMAND_START wrapper.ntservice.starttype=AUTO_START # Allow the service to interact with the desktop (Windows NT/2000/XP only). wrapper.ntservice.interactive=FALSE