zoukankan      html  css  js  c++  java
  • Centos7修改默认网卡名(改为eth0)以及网卡启动报错RTNETLINK answers: File exists处理

    安装好centos7版本的系统后,发现默认的网卡名字有点怪,为了便于管理,可以手动修改。下面对centos7版本下网卡重命名操作做一记录:
    1)编辑网卡信息
    [root@linux-node2~]# cd /etc/sysconfig/network-scripts/                             #进入网卡目录
    [root@linux-node2network-scripts]# mv ifcfg-eno16777728 ifcfg-eth0          #将默认的网卡名eno16777728改为eth0
    [root@linux-node2network-scripts]# cat ifcfg-eth0                        #编辑网卡信息
    TYPE=Ethernet
    BOOTPROTO=static
    DEFROUTE=yes
    PEERDNS=yes
    PEERROUTES=yes
    IPV4_FAILURE_FATAL=no
    NAME=eth0                                    #name修改为eth0
    ONBOOT=yes
    IPADDR=192.168.56.12
    NETMASK=255.255.255.0
    GATEWAY=192.168.56.2
    DNS1=192.168.56.2

    2)修改grub
    [root@linux-node2~]# cat /etc/sysconfig/grub                  #编辑内核信息,添加红色字段的
    GRUB_TIMEOUT=5
    GRUB_DEFAULT=saved
    GRUB_DISABLE_SUBMENU=true
    GRUB_TERMINAL_OUTPUT="console"
    GRUB_CMDLINE_LINUX="crashkernel=autorhgb net.ifnames=0 biosdevname=0 quiet"
    GRUB_DISABLE_RECOVERY="true"

    [root@linux-node2~]# grub2-mkconfig -o /boot/grub2/grub.cfg       #生成启动菜单
    Generatinggrub configuration file ...
    Foundlinux image: /boot/vmlinuz-3.10.0-229.el7.x86_64
    Foundinitrd image: /boot/initramfs-3.10.0-229.el7.x86_64.img
    Foundlinux image: /boot/vmlinuz-0-rescue-1100f7e6c97d4afaad2e396403ba7f61
    Foundinitrd image: /boot/initramfs-0-rescue-1100f7e6c97d4afaad2e396403ba7f61.img
    Done

    也可以在开机启动加载安装系统界面设置。

    3)验证是否修改成功

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    [root@linux-node2~]# reboot                           #必须重启系统生效
    [root@linux-node2~]# yum install net-tools                   #默认centos7不支持ifconfig 需要看装net-tools包
    [root@linux-node2~]# ifconfig eth0                 #在次查看网卡信息
    eth0:flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
     
    inet 192.168.56.12 netmask 255.255.255.0 broadcast 192.168.56.255
     
    inet6 fe80::20c:29ff:fe5c:7bb1 prefixlen 64 scopeid 0x20<link>
     
    ether 00:0c:29:5c:7b:b1 txqueuelen 1000 (Ethernet)
     
    RX packets 152 bytes 14503 (14.1 KiB)
     
    RX errors 0 dropped 0 overruns 0 frame 0
     
    TX packets 98 bytes 14402 (14.0 KiB)
     
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 

    centos7启动网卡服务报错“RTNETLINK answers: File exists”的解决方法

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    [root@localhost network-scripts]# service NetworkManager stop
    Starting network (via systemctl):  Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.
     
    [root@localhost network-scripts]# systemctl status network.service
    ?.network.service - LSB: Bring up/down networking
       Loaded: loaded (/etc/rc.d/init.d/network)
       Active: failed (Result: exit-code) since Mon 2017-03-20 18:41:03 CST; 3min 49s ago
         Docs: man:systemd-sysv-generator(8)
      Process: 18880 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
     
    Mar 20 18:41:03 localhost.localdomain network[18880]: RTNETLINK answers: File exists
    Mar 20 18:41:03 localhost.localdomain network[18880]: RTNETLINK answers: File exists
    Mar 20 18:41:03 localhost.localdomain network[18880]: RTNETLINK answers: File exists
    Mar 20 18:41:03 localhost.localdomain network[18880]: RTNETLINK answers: File exists
    Mar 20 18:41:03 localhost.localdomain network[18880]: RTNETLINK answers: File exists
    Mar 20 18:41:03 localhost.localdomain network[18880]: RTNETLINK answers: File exists
    Mar 20 18:41:03 localhost.localdomain systemd[1]: network.service: control process exited, code=exited status=1
    Mar 20 18:41:03 localhost.localdomain systemd[1]: Failed to start LSB: Bring up/down networking.
    Mar 20 18:41:03 localhost.localdomain systemd[1]: Unit network.service entered failed state.
    Mar 20 18:41:03 localhost.localdomain systemd[1]: network.service failed.
     
    原因分析和解决:
    在centos下出现该故障的原因是启动网络的两个服务/etc/init.d/network 和 /etc/init.d/NetworkManager有冲突。
    从根本上说是NetworkMaganager(NM)的带来的冲突,停用NetworkManager即可解决。重启即可。
    [root@localhost network-scripts]# service NetworkManager stop
    Redirecting to /bin/systemctl stop  NetworkManager.service
    [root@localhost network-scripts]# systemctl start network.service
    [root@localhost network-scripts]#
     

    参考链接:https://www.cnblogs.com/kevingrace/p/5570274.html

  • 相关阅读:
    十分钟开发一个调用Activity的PhoneGap插件
    Mac下MAMP初试体验
    探索Android中的Parcel机制(上)
    两个栈实现队列+两个队列实现栈----java
    php实现工厂模式
    Hibernate Criterion
    Android用户界面概览
    秒杀多线程第四篇 一个经典的多线程同步问题
    Java串口通信具体解释
    逗比之——程序猿装逼手冊1(0基础版)
  • 原文地址:https://www.cnblogs.com/EikiXu/p/10488775.html
Copyright © 2011-2022 走看看