zoukankan      html  css  js  c++  java
  • Spring定时任务的几种实现

    Spring定时任务的几种实现

    近日项目开发中需要执行一些定时任务,比如需要在每天凌晨时候,分析一次前一天的日志信息,借此机会整理了一下定时任务的几种实现方式,由于项目采用spring框架,所以我都将结合

    spring框架来介绍。

    一.分类

    • 从实现的技术上来分类,目前主要有三种技术(或者说有三种产品):

    1. Java自带的java.util.Timer类,这个类允许你调度一个java.util.TimerTask任务。使用这种方式可以让你的程序按照某一个频度执行,但不能在指定时间运行。一般用的较少,这篇文章将不做详细介绍。
    2. 使用Quartz,这是一个功能比较强大的的调度器,可以让你的程序在指定时间执行,也可以按照某一个频度执行,配置起来稍显复杂,稍后会详细介绍。
    3. Spring3.0以后自带的task,可以将它看成一个轻量级的Quartz,而且使用起来比Quartz简单许多,稍后会介绍。
    • 从作业类的继承方式来讲,可以分为两类:

    1. 作业类需要继承自特定的作业类基类,如Quartz中需要继承自org.springframework.scheduling.quartz.QuartzJobBean;java.util.Timer中需要继承自java.util.TimerTask。
    2. 作业类即普通的java类,不需要继承自任何基类。

    注:个人推荐使用第二种方式,因为这样所以的类都是普通类,不需要事先区别对待。

    • 从任务调度的触发时机来分,这里主要是针对作业使用的触发器,主要有以下两种:
    1. 每隔指定时间则触发一次,在Quartz中对应的触发器为:org.springframework.scheduling.quartz.SimpleTriggerBean
    2. 每到指定时间则触发一次,在Quartz中对应的调度器为:org.springframework.scheduling.quartz.CronTriggerBean

    注:并非每种任务都可以使用这两种触发器,如java.util.TimerTask任务就只能使用第一种。Quartz和spring task都可以支持这两种触发条件。

    二.用法说明

    详细介绍每种任务调度工具的使用方式,包括Quartz和spring task两种。

    Quartz

    第一种,作业类继承自特定的基类:org.springframework.scheduling.quartz.QuartzJobBean。

    第一步:定义作业类

    Java代码  收藏代码
    1. import org.quartz.JobExecutionContext;  
    2. import org.quartz.JobExecutionException;  
    3. import org.springframework.scheduling.quartz.QuartzJobBean;  
    4. public class Job1 extends QuartzJobBean {  
    5.   
    6. private int timeout;  
    7. private static int i = 0;  
    8. //调度工厂实例化后,经过timeout时间开始执行调度  
    9. public void setTimeout(int timeout) {  
    10. this.timeout = timeout;  
    11. }  
    12.   
    13. /** 
    14. * 要调度的具体任务 
    15. */  
    16. @Override  
    17. protected void executeInternal(JobExecutionContext context)  
    18. throws JobExecutionException {  
    19.   System.out.println("定时任务执行中…");  
    20. }  
    21. }  
    import org.quartz.JobExecutionContext;
    import org.quartz.JobExecutionException;
    import org.springframework.scheduling.quartz.QuartzJobBean;
    public class Job1 extends QuartzJobBean {
    
    private int timeout;
    private static int i = 0;
    //调度工厂实例化后,经过timeout时间开始执行调度
    public void setTimeout(int timeout) {
    this.timeout = timeout;
    }
    
    /**
    * 要调度的具体任务
    */
    @Override
    protected void executeInternal(JobExecutionContext context)
    throws JobExecutionException {
      System.out.println("定时任务执行中…");
    }
    }

     第二步:spring配置文件中配置作业类JobDetailBean

    Xml代码  收藏代码
    1. <bean name="job1" class="org.springframework.scheduling.quartz.JobDetailBean">  
    2. <property name="jobClass" value="com.gy.Job1" />  
    3. <property name="jobDataAsMap">  
    4. <map>  
    5. <entry key="timeout" value="0" />  
    6. </map>  
    7. </property>  
    8. </bean>  
    <bean name="job1" class="org.springframework.scheduling.quartz.JobDetailBean">
    <property name="jobClass" value="com.gy.Job1" />
    <property name="jobDataAsMap">
    <map>
    <entry key="timeout" value="0" />
    </map>
    </property>
    </bean>

     说明:org.springframework.scheduling.quartz.JobDetailBean有两个属性,jobClass属性即我们在java代码中定义的任务类,jobDataAsMap属性即该任务类中需要注入的属性值。

    第三步:配置作业调度的触发方式(触发器)

    Quartz的作业触发器有两种,分别是

    org.springframework.scheduling.quartz.SimpleTriggerBean

    org.springframework.scheduling.quartz.CronTriggerBean

    第一种SimpleTriggerBean,只支持按照一定频度调用任务,如每隔30分钟运行一次。

    配置方式如下:

    Xml代码  收藏代码
    1. <bean id="simpleTrigger" class="org.springframework.scheduling.quartz.SimpleTriggerBean">  
    2. <property name="jobDetail" ref="job1" />  
    3. <property name="startDelay" value="0" /><!-- 调度工厂实例化后,经过0秒开始执行调度 -->  
    4. <property name="repeatInterval" value="2000" /><!-- 每2秒调度一次 -->  
    5. </bean>  
    <bean id="simpleTrigger" class="org.springframework.scheduling.quartz.SimpleTriggerBean">
    <property name="jobDetail" ref="job1" />
    <property name="startDelay" value="0" /><!-- 调度工厂实例化后,经过0秒开始执行调度 -->
    <property name="repeatInterval" value="2000" /><!-- 每2秒调度一次 -->
    </bean>

    第二种CronTriggerBean,支持到指定时间运行一次,如每天12:00运行一次等。

    配置方式如下:

    Xml代码  收藏代码
    1. <bean id="cronTrigger" class="org.springframework.scheduling.quartz.CronTriggerBean">  
    2. <property name="jobDetail" ref="job1" />  
    3. <!—每天12:00运行一次 -->  
    4. <property name="cronExpression" value="0 0 12 * * ?" />  
    5. </bean>  
    <bean id="cronTrigger" class="org.springframework.scheduling.quartz.CronTriggerBean">
    <property name="jobDetail" ref="job1" />
    <!—每天12:00运行一次 -->
    <property name="cronExpression" value="0 0 12 * * ?" />
    </bean>

     关于cronExpression表达式的语法参见附录。

    第四步:配置调度工厂 

    Xml代码  收藏代码
    1. <bean class="org.springframework.scheduling.quartz.SchedulerFactoryBean">  
    2. <property name="triggers">  
    3. <list>  
    4. <ref bean="cronTrigger" />  
    5. </list>  
    6. </property>  
    7. </bean>  
    <bean class="org.springframework.scheduling.quartz.SchedulerFactoryBean">
    <property name="triggers">
    <list>
    <ref bean="cronTrigger" />
    </list>
    </property>
    </bean>

     说明:该参数指定的就是之前配置的触发器的名字。

    第五步:启动你的应用即可,即将工程部署至tomcat或其他容器。

    第二种,作业类不继承特定基类。

    Spring能够支持这种方式,归功于两个类:

    org.springframework.scheduling.timer.MethodInvokingTimerTaskFactoryBean

    org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryBean

    这两个类分别对应spring支持的两种实现任务调度的方式,即前文提到到java自带的timer task方式和Quartz方式。这里我只写MethodInvokingJobDetailFactoryBean的用法,使用该类的好处是,我们的任务类不再需要继承自任何类,而是普通的pojo。

    第一步:编写任务类

    Java代码  收藏代码
    1. public class Job2 {  
    2. public void doJob2() {  
    3. System.out.println("不继承QuartzJobBean方式-调度进行中...");  
    4. }  
    5. }  
    public class Job2 {
    public void doJob2() {
    System.out.println("不继承QuartzJobBean方式-调度进行中...");
    }
    }

     可以看出,这就是一个普通的类,并且有一个方法。

    第二步:配置作业类

    Xml代码  收藏代码
    1. <bean id="job2"  
    2. class="org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryBean">  
    3. <property name="targetObject">  
    4. <bean class="com.gy.Job2" />  
    5. </property>  
    6. <property name="targetMethod" value="doJob2" />  
    7. <property name="concurrent" value="false" /><!-- 作业不并发调度 -->  
    8. </bean>  
    <bean id="job2"
    class="org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryBean">
    <property name="targetObject">
    <bean class="com.gy.Job2" />
    </property>
    <property name="targetMethod" value="doJob2" />
    <property name="concurrent" value="false" /><!-- 作业不并发调度 -->
    </bean>

     说明:这一步是关键步骤,声明一个MethodInvokingJobDetailFactoryBean,有两个关键属性:targetObject指定任务类,targetMethod指定运行的方法。往下的步骤就与方法一相同了,为了完整,同样贴出。

    第三步:配置作业调度的触发方式(触发器)

    Quartz的作业触发器有两种,分别是

    org.springframework.scheduling.quartz.SimpleTriggerBean

    org.springframework.scheduling.quartz.CronTriggerBean

    第一种SimpleTriggerBean,只支持按照一定频度调用任务,如每隔30分钟运行一次。

    配置方式如下:

    Xml代码  收藏代码
    1. <bean id="simpleTrigger" class="org.springframework.scheduling.quartz.SimpleTriggerBean">  
    2. <property name="jobDetail" ref="job2" />  
    3. <property name="startDelay" value="0" /><!-- 调度工厂实例化后,经过0秒开始执行调度 -->  
    4. <property name="repeatInterval" value="2000" /><!-- 每2秒调度一次 -->  
    5. </bean>  
    <bean id="simpleTrigger" class="org.springframework.scheduling.quartz.SimpleTriggerBean">
    <property name="jobDetail" ref="job2" />
    <property name="startDelay" value="0" /><!-- 调度工厂实例化后,经过0秒开始执行调度 -->
    <property name="repeatInterval" value="2000" /><!-- 每2秒调度一次 -->
    </bean>

     第二种CronTriggerBean,支持到指定时间运行一次,如每天12:00运行一次等。

    配置方式如下:

    Xml代码  收藏代码
    1. <bean id="cronTrigger" class="org.springframework.scheduling.quartz.CronTriggerBean">  
    2. <property name="jobDetail" ref="job2" />  
    3. <!—每天12:00运行一次 -->  
    4. <property name="cronExpression" value="0 0 12 * * ?" />  
    5. </bean>  
    <bean id="cronTrigger" class="org.springframework.scheduling.quartz.CronTriggerBean">
    <property name="jobDetail" ref="job2" />
    <!—每天12:00运行一次 -->
    <property name="cronExpression" value="0 0 12 * * ?" />
    </bean>

    以上两种调度方式根据实际情况,任选一种即可。

    第四步:配置调度工厂 

    Xml代码  收藏代码
    1. <bean class="org.springframework.scheduling.quartz.SchedulerFactoryBean">  
    2. <property name="triggers">  
    3. <list>  
    4. <ref bean="cronTrigger" />  
    5. </list>  
    6. </property>  
    7. </bean>  
    <bean class="org.springframework.scheduling.quartz.SchedulerFactoryBean">
    <property name="triggers">
    <list>
    <ref bean="cronTrigger" />
    </list>
    </property>
    </bean>

    说明:该参数指定的就是之前配置的触发器的名字。

    第五步:启动你的应用即可,即将工程部署至tomcat或其他容器。

    到此,spring中Quartz的基本配置就介绍完了,当然了,使用之前,要导入相应的spring的包与Quartz的包,这些就不消多说了。

    其实可以看出Quartz的配置看上去还是挺复杂的,没有办法,因为Quartz其实是个重量级的工具,如果我们只是想简单的执行几个简单的定时任务,有没有更简单的工具,有!

    请看我第下文Spring task的介绍。

    Spring-Task

    上节介绍了在Spring 中使用Quartz,本文介绍Spring3.0以后自主开发的定时任务工具,spring task,可以将它比作一个轻量级的Quartz,而且使用起来很简单,除spring相关的包外不需要额外的包,而且支持注解和配置文件两种

    形式,下面将分别介绍这两种方式。

    第一种:配置文件方式

    第一步:编写作业类

    即普通的pojo,如下:

    Java代码  收藏代码
    1. import org.springframework.stereotype.Service;  
    2. @Service  
    3. public class TaskJob {  
    4.       
    5.     public void job1() {  
    6.         System.out.println(“任务进行中。。。”);  
    7.     }  
    8. }  
    import org.springframework.stereotype.Service;
    @Service
    public class TaskJob {
        
        public void job1() {
            System.out.println(“任务进行中。。。”);
        }
    }

     第二步:在spring配置文件头中添加命名空间及描述

    Xml代码  收藏代码
    1. <beans xmlns="http://www.springframework.org/schema/beans"  
    2.     xmlns:task="http://www.springframework.org/schema/task"   
    3.     。。。。。。  
    4.     xsi:schemaLocation="http://www.springframework.org/schema/task http://www.springframework.org/schema/task/spring-task-3.0.xsd">  
    <beans xmlns="http://www.springframework.org/schema/beans"
        xmlns:task="http://www.springframework.org/schema/task" 
        。。。。。。
        xsi:schemaLocation="http://www.springframework.org/schema/task http://www.springframework.org/schema/task/spring-task-3.0.xsd">

     第三步:spring配置文件中设置具体的任务

    Xml代码  收藏代码
    1.  <task:scheduled-tasks>   
    2.         <task:scheduled ref="taskJob" method="job1" cron="0 * * * * ?"/>   
    3. </task:scheduled-tasks>  
    4.   
    5. <context:component-scan base-package=" com.gy.mytask " />  
     <task:scheduled-tasks> 
            <task:scheduled ref="taskJob" method="job1" cron="0 * * * * ?"/> 
    </task:scheduled-tasks>
    
    <context:component-scan base-package=" com.gy.mytask " />

    说明:ref参数指定的即任务类,method指定的即需要运行的方法,cron及cronExpression表达式,具体写法这里不介绍了,详情见上篇文章附录。

    <context:component-scan base-package="com.gy.mytask" />这个配置不消多说了,spring扫描注解用的。

    到这里配置就完成了,是不是很简单。

    第二种:使用注解形式

    也许我们不想每写一个任务类还要在xml文件中配置下,我们可以使用注解@Scheduled,我们看看源文件中该注解的定义:

    Java代码  收藏代码
    1. @Target({java.lang.annotation.ElementType.METHOD, java.lang.annotation.ElementType.ANNOTATION_TYPE})  
    2. @Retention(RetentionPolicy.RUNTIME)  
    3. @Documented  
    4. public @interface Scheduled  
    5. {  
    6.   public abstract String cron();  
    7.   
    8.   public abstract long fixedDelay();  
    9.   
    10.   public abstract long fixedRate();  
    11. }  
    @Target({java.lang.annotation.ElementType.METHOD, java.lang.annotation.ElementType.ANNOTATION_TYPE})
    @Retention(RetentionPolicy.RUNTIME)
    @Documented
    public @interface Scheduled
    {
      public abstract String cron();
    
      public abstract long fixedDelay();
    
      public abstract long fixedRate();
    }

     可以看出该注解有三个方法或者叫参数,分别表示的意思是:

    cron:指定cron表达式

    fixedDelay:官方文档解释:An interval-based trigger where the interval is measured from the completion time of the previous task. The time unit value is measured in milliseconds.即表示从上一个任务完成开始到下一个任务开始的间隔,单位是毫秒。

    fixedRate:官方文档解释:An interval-based trigger where the interval is measured from the start time of the previous task. The time unit value is measured in milliseconds.即从上一个任务开始到下一个任务开始的间隔,单位是毫秒。

    下面我来配置一下。

    第一步:编写pojo

    Java代码  收藏代码
    1. import org.springframework.scheduling.annotation.Scheduled;    
    2. import org.springframework.stereotype.Component;  
    3.   
    4. @Component(“taskJob”)  
    5. public class TaskJob {  
    6.     @Scheduled(cron = "0 0 3 * * ?")  
    7.     public void job1() {  
    8.         System.out.println(“任务进行中。。。”);  
    9.     }  
    10. }  
    import org.springframework.scheduling.annotation.Scheduled;  
    import org.springframework.stereotype.Component;
    
    @Component(“taskJob”)
    public class TaskJob {
        @Scheduled(cron = "0 0 3 * * ?")
        public void job1() {
            System.out.println(“任务进行中。。。”);
        }
    }

     第二步:添加task相关的配置:

    Xml代码  收藏代码
    1. <?xml version="1.0" encoding="UTF-8"?>  
    2. <beans xmlns="http://www.springframework.org/schema/beans"  
    3.     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:aop="http://www.springframework.org/schema/aop"  
    4.     xmlns:context="http://www.springframework.org/schema/context"  
    5.     xmlns:tx="http://www.springframework.org/schema/tx"  
    6.     xmlns:task="http://www.springframework.org/schema/task"  
    7.     xsi:schemaLocation="  
    8.         http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd  
    9.         http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-3.0.xsd  
    10.         http://www.springframework.org/schema/context   
    11. http://www.springframework.org/schema/jdbc/spring-jdbc-3.0.xsd  
    12.         http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-3.0.xsd  
    13.         http://www.springframework.org/schema/task http://www.springframework.org/schema/task/spring-task-3.0.xsd"  
    14.     default-lazy-init="false">  
    15.   
    16.   
    17.     <context:annotation-config />  
    18.     <!—spring扫描注解的配置   -->  
    19.     <context:component-scan base-package="com.gy.mytask" />  
    20.       
    21. <!—开启这个配置,spring才能识别@Scheduled注解   -->  
    22.     <task:annotation-driven scheduler="qbScheduler" mode="proxy"/>  
    23.     <task:scheduler id="qbScheduler" pool-size="10"/>  
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
    	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:aop="http://www.springframework.org/schema/aop"
    	xmlns:context="http://www.springframework.org/schema/context"
    	xmlns:tx="http://www.springframework.org/schema/tx"
    	xmlns:task="http://www.springframework.org/schema/task"
    	xsi:schemaLocation="
    		http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd
    		http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-3.0.xsd
    		http://www.springframework.org/schema/context 
    http://www.springframework.org/schema/jdbc/spring-jdbc-3.0.xsd
    		http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-3.0.xsd
    		http://www.springframework.org/schema/task http://www.springframework.org/schema/task/spring-task-3.0.xsd"
    	default-lazy-init="false">
    
    
    	<context:annotation-config />
    	<!—spring扫描注解的配置   -->
    	<context:component-scan base-package="com.gy.mytask" />
    	
    <!—开启这个配置,spring才能识别@Scheduled注解   -->
    	<task:annotation-driven scheduler="qbScheduler" mode="proxy"/>
    	<task:scheduler id="qbScheduler" pool-size="10"/>

    说明:理论上只需要加上<task:annotation-driven />这句配置就可以了,这些参数都不是必须的。

     Ok配置完毕,当然spring task还有很多参数,我就不一一解释了,具体参考xsd文档http://www.springframework.org/schema/task/spring-task-3.0.xsd。

    附录:

    cronExpression的配置说明,具体使用以及参数请百度google

    字段   允许值   允许的特殊字符

    秒    0-59    , - * /

    分    0-59    , - * /

    小时    0-23    , - * /

    日期    1-31    , - * ? / L W C

    月份    1-12 或者 JAN-DEC    , - * /

    星期    1-7 或者 SUN-SAT    , - * ? / L C #

    年(可选)    留空, 1970-2099    , - * / 

    - 区间  

    * 通配符  

    ? 你不想设置那个字段

    下面只例出几个式子

    CRON表达式    含义 

    "0 0 12 * * ?"    每天中午十二点触发 

    "0 15 10 ? * *"    每天早上10:15触发 

    "0 15 10 * * ?"    每天早上10:15触发 

    "0 15 10 * * ? *"    每天早上10:15触发 

    "0 15 10 * * ? 2005"    2005年的每天早上10:15触发 

    "0 * 14 * * ?"    每天从下午2点开始到2点59分每分钟一次触发 

    "0 0/5 14 * * ?"    每天从下午2点开始到2:55分结束每5分钟一次触发 

    "0 0/5 14,18 * * ?"    每天的下午2点至2:55和6点至6点55分两个时间段内每5分钟一次触发 

    "0 0-5 14 * * ?"    每天14:00至14:05每分钟一次触发 

    "0 10,44 14 ? 3 WED"    三月的每周三的14:10和14:44触发 

    "0 15 10 ? * MON-FRI"    每个周一、周二、周三、周四、周五的10:15触发 

  • 相关阅读:
    ryzen nvidia hackintosh
    mysql count 主键之坑
    git命令
    MYSQL 注释
    yaf twig配置
    1.YAF 的安装
    yaf nginx 设置
    ubuntu 16 阿里云 vsftpd
    win10下 homestead 安装
    活动调度
  • 原文地址:https://www.cnblogs.com/HHR-SUN/p/7978581.html
Copyright © 2011-2022 走看看