zoukankan      html  css  js  c++  java
  • Django项目部署到Apache服务器

    本文讲述的是在阿里云服务器(ECS)上部署Django项目于Apache,服务器操作系统为ubuntu,公网Ip地址为123.56.30.151。

    将Django部署到Apache服务器的原因

    Django中的runserver只是一个很简单的web服务器,启动服务器常见的方法是通过Putty执行命令。虽然调试和测试方便,然而如果关闭了Putty或者退出命令,服务就停止了,并且不能承受许多用户同时使用的负载。所以需要将Django部署到生产级的服务器,这里选择Apache。

    ubuntu上部署详细步骤

    1.安装apache2 

    apt-get install apache2

    2.测试apache2

    打开浏览器输入123.56.30.151(云服务器的IP)

    3.建立python与apache的连接

    apt-get install libapache2-mod-wsgi
    #通过执行python -V查看python版本,如果是3.0将第换为
    apt-get install libapache2-mod-wsgi-py3

    4.准备一个新网站

    ubuntu的apache2配置文件在 /etc/apache2/ 下,在文件夹sites-available下新建一个网站配置文件:mysite.conf

    <VirtualHost *:8888>
        DocumentRoot /var/www/mysite/mysite
        <Directory /var/www/mysite/mysite>
            Order allow,deny
            Allow from all
        </Directory>
       WSGIScriptAlias / /var/www/mysite/mysite/wsgi.py
    </VirtualHost>

    通过apachectl -v查看apache2版本号,如果是2.4.x,将Directory中的内容修改为

    Require all granted

    5.更改端口

    修改ports.conf中的Listen 80为Listen 8000,注意:这个文件的开头有一个提示

    # If you just change the port or add more ports here, you will likely also
    # have to change the VirtualHost statement in
    # /etc/apache2/sites-enabled/000-default.conf

    无需遵照这个提示,即不用修改000-default.conf中的端口号,默认为80.

    6.更改django工程

    在工程的wsgi.py文件中添加

    import sys
    sys.path.append("/var/www/mysite/")

    7.设置目录和文件权限

    一般目录权限设置为 755,文件权限设置为 644 

    假如项目位置在 /var/www/mysite (在mysite下面有一个 manage.py,mysite是项目名称)

    cd var/www/
    sudo chmod -R 644 mysite
    sudo find mysite -type d -exec chmod 755 \{\} \;

    sqlite3数据库读写权限:

    sudo chgrp www-data mysite
    sudo chmod g+w mysite
    sudo chgrp www-data mysite/db.sqlite3  
    sudo chmod g+w mysite/db.sqlite3

    8.配置生效

    a2ensite mysite.conf 

    9.启动服务

    service apache2 restart

    出现错误:

    restarting web server apache2                                         [fail] 
     * The apache2 configtest failed.
    Output of config test was:
    AH00526: Syntax error on line 8 of /etc/apache2/sites-enabled/mysite.conf:
    Invalid command 'WSGIScriptAlias', perhaps misspelled or defined by a module not included in the server configuration
    Action 'configtest' failed.
    The Apache error log may have more information.
    tony@T:/etc/apache2/sites-available$ sudo a2enmod wsgi
    ERROR: Module wsgi does not exist!

    执行命令:

    sudo apt-get purge libapache2-mod-wsgi
    sudo apt-get install libapache2-mod-wsgi

    出现错误:

    AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message

    在apache2.conf文件末尾添加,这里的端口设置跟000-default.conf中的一样,而不是mysite.conf中的端口。

    ServerName localhost:80
  • 相关阅读:
    maven实现打包带源代码的jar包
    maven实现打包带源代码的jar包
    maven实现打包带源代码的jar包
    Java奇淫巧技之Lombok
    Java奇淫巧技之Lombok
    Java奇淫巧技之Lombok
    基于移动Web的视图引擎实现
    AE错误代码解释
    Visual Studio q启动卡顿
    RabbitMQ安装后,BADARG问题
  • 原文地址:https://www.cnblogs.com/Junsept/p/6862595.html
Copyright © 2011-2022 走看看