由于需要使用MS的AD用户验证的功能，使AD用户认证成为公司的唯一用户认证的系统，因此，最后一直在找AD用户验证的资料，还好， 找到了如下的资料，非常不错，值得一看!!!
当然，还找到了更好的资源：
通过C#写的一个AD管理的类：http://www.c-sharpcorner.com/Code/2002/Sept/ADClass.asp
1. 基于AD的用户验证
public static bool IsUserValid (string UserName, string Password)
{
using (DirectoryEntry deUser = new DirectoryEntry(ADPath, UserName, Password, AuthenticationTypes.Secure))
{
try
{
// The NativeObject call on the DirectoryEntry object entry is an attempt to bind to the object in the directory.
// Since this call forces authentication, you will get an error if the user does not exist.
// If the user is a valid user in the domain, the call will succeed.
Object native = deUser.NativeObject;
return true;
}
catch
{
return false;
}
}
}
{
using (DirectoryEntry deUser = new DirectoryEntry(ADPath, UserName, Password, AuthenticationTypes.Secure))
{
try
{
// The NativeObject call on the DirectoryEntry object entry is an attempt to bind to the object in the directory.
// Since this call forces authentication, you will get an error if the user does not exist.
// If the user is a valid user in the domain, the call will succeed.
Object native = deUser.NativeObject;
return true;
}
catch
{
return false;
}
}
}
根据UserName/Password验证用户的合法性。需要注意的是：ADSI每次都会尝试Kerberos和NTLM验证，因此系统会记录2次验证记录。在设置Domain Password Policy时，需要考虑到上述的限制。否则，如果Bad Password Count超过限定的Domain Password Policy时，该帐户会Locked out。(注：后面有Article介绍如何判断/如何Lock/Unlock帐户)
2. 验证用户账号Active/Disable
/// <summary>
/// This will perfrom a logical operation on the userAccountControl values
/// to see if the user account is enabled or disabled. The flag for determining if the
/// account is active is a bitwise value (decimal =2)
/// </summary>
/// <param name='userAccountControl'></param>
/// <returns></returns>
public static bool IsAccountActive(int userAccountControl)
{
int userAccountControl_Disabled= Convert.ToInt32(ADAccountOptions.UF_ACCOUNTDISABLE);
int flagExists = userAccountControl & userAccountControl_Disabled;
//if a match is found, then the disabled flag exists within the control flags
if(flagExists >0)
{
return false;
}
else
{
return true;
}
}
/// This will perfrom a logical operation on the userAccountControl values
/// to see if the user account is enabled or disabled. The flag for determining if the
/// account is active is a bitwise value (decimal =2)
/// </summary>
/// <param name='userAccountControl'></param>
/// <returns></returns>
public static bool IsAccountActive(int userAccountControl)
{
int userAccountControl_Disabled= Convert.ToInt32(ADAccountOptions.UF_ACCOUNTDISABLE);
int flagExists = userAccountControl & userAccountControl_Disabled;
//if a match is found, then the disabled flag exists within the control flags
if(flagExists >0)
{
return false;
}
else
{
return true;
}
}
3. 示例代码：调用上述IsUserValid()和IsAccountActive()方法
/// <summary>
/// This method will not actually log a user in, but will perform tests to ensure
/// that the user account exists (matched by both the username and password), and also
/// checks if the account is active.
/// </summary>
/// <param name='UserName'></param>
/// <param name='Password'></param>
/// <returns></returns>
public static ADHelper.LoginResult Login(string UserName, string Password)
{
//first, check if the logon exists based on the username and password
//DirectoryEntry de = GetUser(UserName,Password);
if(IsUserValid(UserName,Password))
{
DirectoryEntry de = GetUser(UserName);
if(de !=null)
{
//convert the accountControl value so that a logical operation can be performed
//to check of the Disabled option exists.
int userAccountControl = Convert.ToInt32(de.Properties['userAccountControl'][0]);
de.Close();
//if the disabled item does not exist then the account is active
if(!IsAccountActive(userAccountControl))
{
return LoginResult.LOGIN_USER_ACCOUNT_INACTIVE;
}
else
{
return LoginResult.LOGIN_OK;
}
}
else
{
return LoginResult.LOGIN_USER_DOESNT_EXIST;
}
}
else
{
return LoginResult.LOGIN_USER_DOESNT_EXIST;
}
}
/// This method will not actually log a user in, but will perform tests to ensure
/// that the user account exists (matched by both the username and password), and also
/// checks if the account is active.
/// </summary>
/// <param name='UserName'></param>
/// <param name='Password'></param>
/// <returns></returns>
public static ADHelper.LoginResult Login(string UserName, string Password)
{
//first, check if the logon exists based on the username and password
//DirectoryEntry de = GetUser(UserName,Password);
if(IsUserValid(UserName,Password))
{
DirectoryEntry de = GetUser(UserName);
if(de !=null)
{
//convert the accountControl value so that a logical operation can be performed
//to check of the Disabled option exists.
int userAccountControl = Convert.ToInt32(de.Properties['userAccountControl'][0]);
de.Close();
//if the disabled item does not exist then the account is active
if(!IsAccountActive(userAccountControl))
{
return LoginResult.LOGIN_USER_ACCOUNT_INACTIVE;
}
else
{
return LoginResult.LOGIN_OK;
}
}
else
{
return LoginResult.LOGIN_USER_DOESNT_EXIST;
}
}
else
{
return LoginResult.LOGIN_USER_DOESNT_EXIST;
}
}
4. 相关enum数据类型：ADAccountOptions和LoginResult
#region Enumerations
public enum ADAccountOptions
{
UF_TEMP_DUPLICATE_ACCOUNT = 0x0100,
UF_NORMAL_ACCOUNT =0x0200,
UF_INTERDOMAIN_TRUST_ACCOUNT =0x0800,
UF_WORKSTATION_TRUST_ACCOUNT = 0x1000,
UF_SERVER_TRUST_ACCOUNT =0x2000,
UF_DONT_EXPIRE_PASSWD=0x10000,
UF_SCRIPT =0x0001,
UF_ACCOUNTDISABLE=0x0002,
UF_HOMEDIR_REQUIRED =0x0008,
UF_LOCKOUT=0x0010,
UF_PASSWD_NOTREQD=0x0020,
UF_PASSWD_CANT_CHANGE=0x0040,
UF_ACCOUNT_LOCKOUT=0X0010,
UF_ENCRYPTED_TEXT_PASSWORD_ALLOWED=0X0080,
}
public enum LoginResult
{
LOGIN_OK=0,
LOGIN_USER_DOESNT_EXIST,
LOGIN_USER_ACCOUNT_INACTIVE
}
#endregion
public enum ADAccountOptions
{
UF_TEMP_DUPLICATE_ACCOUNT = 0x0100,
UF_NORMAL_ACCOUNT =0x0200,
UF_INTERDOMAIN_TRUST_ACCOUNT =0x0800,
UF_WORKSTATION_TRUST_ACCOUNT = 0x1000,
UF_SERVER_TRUST_ACCOUNT =0x2000,
UF_DONT_EXPIRE_PASSWD=0x10000,
UF_SCRIPT =0x0001,
UF_ACCOUNTDISABLE=0x0002,
UF_HOMEDIR_REQUIRED =0x0008,
UF_LOCKOUT=0x0010,
UF_PASSWD_NOTREQD=0x0020,
UF_PASSWD_CANT_CHANGE=0x0040,
UF_ACCOUNT_LOCKOUT=0X0010,
UF_ENCRYPTED_TEXT_PASSWORD_ALLOWED=0X0080,
}
public enum LoginResult
{
LOGIN_OK=0,
LOGIN_USER_DOESNT_EXIST,
LOGIN_USER_ACCOUNT_INACTIVE
}
#endregion
具体用户界面User Interface，请参考如下Reference 1
