1. [root@localhost ~]# fdisk /dev/sdb 欢迎使用 fdisk (util-linux 2.23.2)。
更改将停留在内存中，直到您决定将更改写入磁盘。 使用写入命令前请三思。
Device does not contain a recognized partition table 使用磁盘标识符 0x81db43c9 创建新的 DOS 磁盘标签。
命令(输入 m 获取帮助)：n Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): p 分区号 (1-4，默认 1)：1 起始 扇区 (2048-41943039，默认为 2048)： 将使用默认值 2048 Last 扇区, +扇区 or +size{K,M,G} (2048-41943039，默认为 41943039)： 将使用默认值 41943039 分区 1 已设置为 Linux 类型，大小设为 20 GiB
命令(输入 m 获取帮助)：wq The partition table has been altered!
Calling ioctl() to re-read partition table. 正在同步磁盘。
fdisk /dev/sdd n p 1 回车 回车 Wq
fdisk /dev/sdd n p 1 回车 回车 Wq
2. [root@localhost ~]# mdadm -Cv /dev/md5 -l5 -n3 /dev/sd[bcd]1 mdadm: layout defaults to left-symmetric mdadm: layout defaults to left-symmetric mdadm: chunk size defaults to 512K mdadm: size set to 20954112K mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md5 started.
3. [root@localhost ~]# pvcreate /dev/md5 Physical volume "/dev/md5" successfully created
4. [root@localhost ~]# vgcreate myvg /dev/md5 Volume group "myvg" successfully created
5. [root@localhost ~]# lvcreate -L 10G -n mylv myvg Logical volume "mylv" created.
6. [root@localhost ~]# mkfs -t xfs /dev/myvg/mylv log stripe unit (524288 bytes) is too large (maximum is 256KiB) log stripe unit adjusted to 32KiB meta-data=/dev/myvg/mylv isize=256 agcount=16, agsize=163712 blks = sectsz=512 attr=2, projid32bit=1 = crc=0 finobt=0 data = bsize=4096 blocks=2619392, imaxpct=25 = sunit=128 swidth=256 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=0 log =internal log bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=8 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0
7. yum -y install gcc gcc-c++ make
[root@localhost Packages]# yum -y install gcc gcc-c++ make
[root@localhost ~]# tar -xf httpd-2.2.17.tar.gz -C /usr/src
[root@localhost ~]# cd /usr/src/httpd-2.2.17/
[root@localhost httpd-2.2.17]# ./configure --prefix=/usr/local/apache
[root@localhost httpd-2.2.17]# make
[root@localhost httpd-2.2.17]# make install
[root@localhost httpd-2.2.17]# cd /usr/local/apache/conf/
[root@localhost conf]# cp httpd.conf httpd.conf.bak
[root@localhost conf]# vi /usr/local/apache/conf/httpd.conf
[root@localhost conf]# /usr/local/apache/bin/apachectl start
[root@localhost conf]# yum -y install lynx
[root@localhost conf]# lynx 127.0.0.1
[root@localhost conf]# mount /dev/myvg/mylv /usr/local/apache/htdocs/