zoukankan      html  css  js  c++  java
  • hdu 1301&&poj 1251 最小生成树prim实现

    http://acm.hdu.edu.cn/showproblem.php?pid=1301

    Jungle Roads

    Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)
    Total Submission(s): 4145    Accepted Submission(s): 3020


    Problem Description

    The Head Elder of the tropical island of Lagrishan has a problem. A burst of foreign aid money was spent on extra roads between villages some years ago. But the jungle overtakes roads relentlessly, so the large road network is too expensive to maintain. The Council of Elders must choose to stop maintaining some roads. The map above on the left shows all the roads in use now and the cost in aacms per month to maintain them. Of course there needs to be some way to get between all the villages on maintained roads, even if the route is not as short as before. The Chief Elder would like to tell the Council of Elders what would be the smallest amount they could spend in aacms per month to maintain roads that would connect all the villages. The villages are labeled A through I in the maps above. The map on the right shows the roads that could be maintained most cheaply, for 216 aacms per month. Your task is to write a program that will solve such problems. 

    The input consists of one to 100 data sets, followed by a final line containing only 0. Each data set starts with a line containing only a number n, which is the number of villages, 1 < n < 27, and the villages are labeled with the first n letters of the alphabet, capitalized. Each data set is completed with n-1 lines that start with village labels in alphabetical order. There is no line for the last village. Each line for a village starts with the village label followed by a number, k, of roads from this village to villages with labels later in the alphabet. If k is greater than 0, the line continues with data for each of the k roads. The data for each road is the village label for the other end of the road followed by the monthly maintenance cost in aacms for the road. Maintenance costs will be positive integers less than 100. All data fields in the row are separated by single blanks. The road network will always allow travel between all the villages. The network will never have more than 75 roads. No village will have more than 15 roads going to other villages (before or after in the alphabet). In the sample input below, the first data set goes with the map above. 

    The output is one integer per line for each data set: the minimum cost in aacms per month to maintain a road system that connect all the villages. Caution: A brute force solution that examines every possible set of roads will not finish within the one minute time limit. 
     
    Sample Input
    9
    A 2 B 12 I 25
    B 3 C 10 H 40 I 8
    C 2 D 18 G 55
    D 1 E 44
    E 2 F 60 G 38
    F 0
    G 1 H 35
    H 1 I 35
    3
    A 2 B 10 C 40
    B 1 C 20
    0
     
    Sample Output
    216
    30

    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

    经典的prim算法,但是要注意存入图的方式,并且要注意是无向图,赋值要对称赋值

    #include <stdio.h>
    #include <string.h>
    #include <stdlib.h>
    #include <algorithm>
    
    #define Maxint 0x7fffffff
    
    int map[105][105],visit[105],low[105];
    int n;
    
    int prim()
    {
        int pos=1,i,j,minn,sum=0;
        memset(visit,0,sizeof(visit));
        visit[1]=1;
        for(i=1;i<=n;i++)
        {
            if(i!=pos)
            {
                low[i]=map[pos][i];
            }
        }
    
        for(i=1;i<n;i++)
        {
            minn=Maxint;
            for(j=1;j<=n;j++)
            {
                if(visit[j]==0 && minn>low[j])
                {
                    minn=low[j];
                    pos=j;
                }
            }
    
            sum+=minn;
            visit[pos]=1;
    
            for(j=1;j<=n;j++)
            {
                if(visit[j]==0 && low[j]>map[pos][j])
                {
                    low[j]=map[pos][j];
                }
            }
        }
        return sum;
    }
    
    int main()
    {
        int i,j;
        while(scanf("%d",&n)!=EOF&&n!=0)
        {
            char a,b,c;
            int m,k;
            for(i=1;i<=n;i++)
                for(j=1;j<=n;j++)
                map[i][j]=Maxint;
            getchar();
            for(i=1;i<n;i++)
            {
                scanf("%c%d%*c",&a,&m);
                //getchar();
                for(j=1;j<=m;j++)
                {
                    scanf("%c%d%*c",&b,&k);
                    map[a-64][b-64]=map[b-64][a-64]=k;//特别注意是无向图
                }
            }
    
            int result=prim();
            printf("%d
    ",result);
        }
        return 0;
    }
    

      

     //poj1251 注意空格,应改用cin输入,以防止多个空格造成PE

  • 相关阅读:
    python内建eval, exec 和exec函数的用法
    wxPython控件学习之wx.grid.Grid (包括对GridCellEditor和GridCelRender的扩展,以支持更多的grid cell 样式, 以GridCellColorEditor为例)
    wxPython控件学习之wx.ComboBox
    tar 解压缩命令
    ios是否安装了某应用
    iPhone IOS中DEB如何安装
    一种简便获取iPhone IMEI 的方法
    iOSOpenDevtroubleshoot
    Mac&iOS Socket编程
    Debian Binary Package Building HOWTO
  • 原文地址:https://www.cnblogs.com/ccccnzb/p/3832301.html
Copyright © 2011-2022 走看看