安装环境
Linux服务器：oracle linux 6.6 64位
Oracle服务器：Oracle11gR2 64位
系统要求
1、Linux安装Oracle系统要求
|
系统要求 |
说明 |
|
内存 |
必须高于1G的物理内存 |
|
一般为内存的2倍，例如：1G的内存可以设置swap 分区为3G大小 |
|
|
硬盘 |
5G以上 |
2、修改操作系统核心参数
在Root用户下执行以下步骤：
1）修改用户的SHELL的限制，修改/etc/security/limits.conf文件
输入命令：vi /etc/security/limits.conf，按i键进入编辑模式，将下列内容加入该文件。
|
oracle soft nproc 2047 |
编辑完成后按Esc键，输入“:wq”存盘退出
2）修改/etc/pam.d/login 文件，输入命令：vi /etc/pam.d/login，按i键进入编辑模式，将下列内容加入该文件。
|
session required
/lib/security/pam_limits.so |
编辑完成后按Esc键，输入“:wq”存盘退出
3）修改linux内核，修改/etc/sysctl.conf文件，输入命令: vi /etc/sysctl.conf ，按i键进入编辑模式，将下列内容加入该文件
|
fs.file-max = 6815744 |
编辑完成后按Esc键，输入“:wq”存盘退出
4）要使 /etc/sysctl.conf 更改立即生效，执行以下命令。 输入：sysctl -p 显示如下：
|
linux:~ # sysctl -p net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.file-max = 6815744 fs.aio-max-nr = 1048576 kernel.shmall = 2097152 kernel.shmmax = 2147483648 kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 4194304 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 |
5）编辑 /etc/profile ，输入命令：vi /etc/profile，按i键进入编辑模式，将下列内容加入该文件。
|
if [ $USER = "oracle" ];
then fi |
编辑完成后按Esc键，输入“:wq”存盘退出
6）创建相关用户和组，作为软件安装和支持组的拥有者。
|
创建用户，输入命令： groupadd oinstall 创建Oracle用户和密码,输入命令： useradd -g oinstall -g dba -m oracle passwd oracle 然后会让你输入密码，密码任意输入2次，但必须保持一致，回车确认 |
7）创建数据库软件目录和数据文件存放目录，目录的位置，根据自己的情况来定，注意磁盘空间即可，这里我把其放到oracle用户下,例如：
|
输入命令： mkdir -p /u01/app/oracle mkdir -p /u01/app/oraInventory |
8)更改目录属主为Oracle用户所有，输入命令：
|
chown -R oracle:oinstall /u01 |
9)Package安装检查
rpm -q binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel expat gcc gcc-c++ glibc glibc-common glibc-devel glibc-headers libaio libaio-devel libgcc libstdc++ libstdc++-devel make pdksh sysstat unixODBC unixODBC-devel | grep "not installed"
安装未安装的package
yum install binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel expat gcc gcc-c++ glibc glibc-common glibc-devel glibc-headers libaio libaio-devel libgcc libstdc++ libstdc++-devel make pdksh sysstat unixODBC unixODBC-devel
10)配置oracle用户的环境变量，首先，切换到新创建的oracle用户下,
输入：su – oracle ，然后直接在输入 ： vi .bash_profile
按i编辑 .bash_profile,进入编辑模式，增加以下内容：
|
umask 022 export ORACLE_BASE=/u01/app/oracle export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1 export ORACLE_SID=ecis export PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/usr/lib |
编辑完成后按Esc键，输入“:wq”存盘退出
安装过程
cd /home/oracle/database
./runInstaller -silent -force -noconfig -responseFile /home/oracle/database/response /db.rsp
依据打印日志判断安装进度以及按照是否成功
dbca -silent -responseFile /home/oracle/database/response/dbca.rsp
依据打印日志判断安装进度以及按照是否成功
netca -silent -responsefile /home/oracle/database/response/netca.rsp
依据打印日志判断安装进度以及按照是否成功
监听问题：
[oracle@localhost admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on 30-NOV-2016 16:18:08
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
Start Date 30-NOV-2016 16:17:54
Uptime 0 days 0 hr. 0 min. 14 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully
[oracle@localhost admin]$
解决方法：
登录数据库：
$sqlplus / as sysdba
显示服务名：
SQL>show parameter service_names
强制注册服务：
SQL>alter system register;
查看监听状态：
$lsnrctl status
附录
db_install.rsp 样例
####################################################################
## Copyright(c) Oracle Corporation 1998, 2013. All rights reserved.##
## ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
## ##
## IMPORTANT NOTE: This file contains plain text passwords and ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation. ##
## ##
####################################################################
#-------------------------------------------------------------------------------
# Do not change the following system generated value.
#-------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
#-------------------------------------------------------------------------------
# Specify the installation option.
# It can be one of the following:
# - INSTALL_DB_SWONLY
# - INSTALL_DB_AND_CONFIG
# - UPGRADE_DB
#-------------------------------------------------------------------------------
oracle.install.option=INSTALL_DB_SWONLY
#-------------------------------------------------------------------------------
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
#-------------------------------------------------------------------------------
ORACLE_HOSTNAME=localhost
#-------------------------------------------------------------------------------
# Specify the Unix group to be set for the inventory directory.
#-------------------------------------------------------------------------------
UNIX_GROUP_NAME=dba
#-------------------------------------------------------------------------------
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
#-------------------------------------------------------------------------------
INVENTORY_LOCATION=/u01/app/oraInventory
#-------------------------------------------------------------------------------
# Specify the languages in which the components will be installed.
#
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
#
# all_langs : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
#-------------------------------------------------------------------------------
SELECTED_LANGUAGES=en,zh_CN
#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Home.
#-------------------------------------------------------------------------------
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Base.
#-------------------------------------------------------------------------------
ORACLE_BASE=/u01/app/oracle
#-------------------------------------------------------------------------------
# Specify the installation edition of the component.
#
# The value should contain only one of these choices.
# - EE : Enterprise Edition
# - SE : Standard Edition
# - SEONE : Standard Edition One
# - PE : Personal Edition (WINDOWS ONLY)
#-------------------------------------------------------------------------------
oracle.install.db.InstallEdition=EE
#-------------------------------------------------------------------------------
# This variable is used to enable or disable custom install and is considered
# only if InstallEdition is EE.
#
# - true : Components mentioned as part of 'optionalComponents' property
# are considered for install.
# - false : Value for 'optionalComponents' is not considered.
#-------------------------------------------------------------------------------
oracle.install.db.EEOptionsSelection=false
#-------------------------------------------------------------------------------
# This property is considered only if 'EEOptionsSelection' is set to true
#
# Description: List of Enterprise Edition Options you would like to enable.
#
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to enable.
#
# oracle.oraolap:11.2.0.4.0 - Oracle OLAP
# oracle.rdbms.dm:11.2.0.4.0 - Oracle Data Mining RDBMS Files
# oracle.rdbms.dv:11.2.0.4.0- Oracle Database Vault option
# oracle.rdbms.lbac:11.2.0.4.0 - Oracle Label Security
# oracle.rdbms.partitioning:11.2.0.4.0 - Oracle Partitioning
# oracle.rdbms.rat:11.2.0.4.0 - Oracle Real Application Testing
#-------------------------------------------------------------------------------
oracle.install.db.optionalComponents=
###############################################################################
# #
# PRIVILEGED OPERATING SYSTEM GROUPS #
# ------------------------------------------ #
# Provide values for the OS groups to which OSDBA and OSOPER privileges #
# needs to be granted. If the install is being performed as a member of the #
# group "dba", then that will be used unless specified otherwise below. #
# #
# The value to be specified for OSDBA and OSOPER group is only for UNIX based #
# Operating System. #
# #
###############################################################################
#------------------------------------------------------------------------------
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
#-------------------------------------------------------------------------------
oracle.install.db.DBA_GROUP=dba
#------------------------------------------------------------------------------
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
#------------------------------------------------------------------------------
oracle.install.db.OPER_GROUP=oinstall
#-------------------------------------------------------------------------------
# Specify the cluster node names selected during the installation.
# Example : oracle.install.db.CLUSTER_NODES=node1,node2
#-------------------------------------------------------------------------------
oracle.install.db.CLUSTER_NODES=
#------------------------------------------------------------------------------
# This variable is used to enable or disable RAC One Node install.
#
# - true : Value of RAC One Node service name is used.
# - false : Value of RAC One Node service name is not used.
#
# If left blank, it will be assumed to be false.
#------------------------------------------------------------------------------
oracle.install.db.isRACOneInstall=false
#------------------------------------------------------------------------------
# Specify the name for RAC One Node Service.
#------------------------------------------------------------------------------
oracle.install.db.racOneServiceName=
#-------------------------------------------------------------------------------
# Specify the type of database to create.
# It can be one of the following:
# - GENERAL_PURPOSE/TRANSACTION_PROCESSING
# - DATA_WAREHOUSE
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
#-------------------------------------------------------------------------------
# Specify the Starter Database Global Database Name.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.globalDBName=
#-------------------------------------------------------------------------------
# Specify the Starter Database SID.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.SID=
#-------------------------------------------------------------------------------
# Specify the Starter Database character set.
#
# One of the following
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.characterSet=
#------------------------------------------------------------------------------
# This variable should be set to true if Automatic Memory Management
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.memoryOption=false
#-------------------------------------------------------------------------------
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.memoryLimit=
#-------------------------------------------------------------------------------
# This variable controls whether to load Example Schemas onto
# the starter database or not.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.installExampleSchemas=false
#-------------------------------------------------------------------------------
# This variable includes enabling audit settings, configuring password profiles
# and revoking some grants to public. These settings are provided by default.
# These settings may also be disabled.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.enableSecuritySettings=true
###############################################################################
# #
# Passwords can be supplied for the following four schemas in the #
# starter database: #
# SYS #
# SYSTEM #
# SYSMAN (used by Enterprise Manager) #
# DBSNMP (used by Enterprise Manager) #
# #
# Same password can be used for all accounts (not recommended) #
# or different passwords for each account can be provided (recommended) #
# #
###############################################################################
#------------------------------------------------------------------------------
# This variable holds the password that is to be used for all schemas in the
# starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.ALL=
#-------------------------------------------------------------------------------
# Specify the SYS password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYS=
#-------------------------------------------------------------------------------
# Specify the SYSTEM password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYSTEM=
#-------------------------------------------------------------------------------
# Specify the SYSMAN password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYSMAN=
#-------------------------------------------------------------------------------
# Specify the DBSNMP password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.DBSNMP=
#-------------------------------------------------------------------------------
# Specify the management option to be selected for the starter database.
# It can be one of the following:
# - GRID_CONTROL
# - DB_CONTROL
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.control=DB_CONTROL
#-------------------------------------------------------------------------------
# Specify the Management Service to use if Grid Control is selected to manage
# the database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=
###############################################################################
# #
# SPECIFY BACKUP AND RECOVERY OPTIONS #
# ------------------------------------ #
# Out-of-box backup and recovery options for the database can be mentioned #
# using the entries below. #
# #
###############################################################################
#------------------------------------------------------------------------------
# This variable is to be set to false if automated backup is not required. Else
# this can be set to true.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.automatedBackup.enable=false
#------------------------------------------------------------------------------
# Regardless of the type of storage that is chosen for backup and recovery, if
# automated backups are enabled, a job will be scheduled to run daily to backup
# the database. This job will run as the operating system user that is
# specified in this variable.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.automatedBackup.osuid=
#-------------------------------------------------------------------------------
# Regardless of the type of storage that is chosen for backup and recovery, if
# automated backups are enabled, a job will be scheduled to run daily to backup
# the database. This job will run as the operating system user specified by the
# above entry. The following entry stores the password for the above operating
# system user.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.automatedBackup.ospwd=
#-------------------------------------------------------------------------------
# Specify the type of storage to use for the database.
# It can be one of the following:
# - FILE_SYSTEM_STORAGE
# - ASM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.storageType=
#-------------------------------------------------------------------------------
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.
#
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=
#-------------------------------------------------------------------------------
# Specify the backup and recovery location.
#
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=
#-------------------------------------------------------------------------------
# Specify the existing ASM disk groups to be used for storage.
#
# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.asm.diskGroup=
#-------------------------------------------------------------------------------
# Specify the password for ASMSNMP user of the ASM instance.
#
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.asm.ASMSNMPPassword=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username.
#
# Example : MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
MYORACLESUPPORT_USERNAME=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password.
#
# Example : MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
MYORACLESUPPORT_PASSWORD=
#------------------------------------------------------------------------------
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
#
# Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
#------------------------------------------------------------------------------
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#------------------------------------------------------------------------------
# Specify whether user doesn't want to configure Security Updates.
# The value for this variable should be true if you don't want to configure
# Security Updates, false otherwise.
#
# The value can be either true or false. If left blank it will be assumed
# to be false.
#
# Example : DECLINE_SECURITY_UPDATES=false
#------------------------------------------------------------------------------
DECLINE_SECURITY_UPDATES=true
#------------------------------------------------------------------------------
# Specify the Proxy server name. Length should be greater than zero.
#
# Example : PROXY_HOST=proxy.domain.com
#------------------------------------------------------------------------------
PROXY_HOST=
#------------------------------------------------------------------------------
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example : PROXY_PORT=25
#------------------------------------------------------------------------------
PROXY_PORT=
#------------------------------------------------------------------------------
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_USER=username
#------------------------------------------------------------------------------
PROXY_USER=
#------------------------------------------------------------------------------
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_PWD=password
#------------------------------------------------------------------------------
PROXY_PWD=
#------------------------------------------------------------------------------
# Specify the proxy realm.
#
# Example : PROXY_REALM=metalink
#------------------------------------------------------------------------------
PROXY_REALM=
#------------------------------------------------------------------------------
# Specify the Oracle Support Hub URL.
#
# Example : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
#------------------------------------------------------------------------------
COLLECTOR_SUPPORTHUB_URL=
#------------------------------------------------------------------------------
# Specify the auto-updates option. It can be one of the following:
# - MYORACLESUPPORT_DOWNLOAD
# - OFFLINE_UPDATES
# - SKIP_UPDATES
#------------------------------------------------------------------------------
oracle.installer.autoupdates.option=SKIP_UPDATES
#------------------------------------------------------------------------------
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
#------------------------------------------------------------------------------
oracle.installer.autoupdates.downloadUpdatesLoc=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
# Example : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=
dbca.rsp 样例
##############################################################################
## ##
## DBCA response file ##
## ------------------ ##
## Copyright 1998, 2013, Oracle Corporation. All Rights Reserved. ##
## ##
## Specify values for the variables listed below to customize Oracle ##
## Database Configuration installation. ##
## ##
## Each variable is associated with a comment. The comment identifies the ##
## variable type. ##
## ##
## Please specify the values in the following format : ##
## Type : Example ##
## String : "<value>" ##
## Boolean : True or False ##
## Number : <numeric value> ##
## StringList : {"<value1>","<value2>"} ##
## ##
## Examples : ##
## 1. dbca -progress_only -responseFile <response file> ##
## Display a progress bar depicting progress of database creation ##
## process. ##
## ##
## 2. dbca -silent -responseFile <response file> ##
## Creates database silently. No user interface is displayed. ##
## ##
## 3. dbca -silent -createDatabase -cloneTemplate ##
## -responseFile <response file> ##
## Creates database silently with clone template. The template in ##
## responsefile is a clone template. ##
## ##
## 4. dbca -silent -deleteDatabase -responseFile <response file> ##
## Deletes database silently. ##
##############################################################################
#-----------------------------------------------------------------------------
# GENERAL section is required for all types of database creations.
#-----------------------------------------------------------------------------
[GENERAL]
#-----------------------------------------------------------------------------
# Name : RESPONSEFILE_VERSION
# Datatype : String
# Description : Version of the database to create
# Valid values : "11.1.0"
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
RESPONSEFILE_VERSION = "11.2.0"
#-----------------------------------------------------------------------------
# Name : OPERATION_TYPE
# Datatype : String
# Description : Type of operation
# Valid values : "createDatabase" "createTemplateFromDB" "createCloneTemplate" "deleteDatabase" "configureDatabase" "addInstance" (RAC-only) "deleteInstance" (RAC-only)
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
OPERATION_TYPE = "createDatabase"
#-----------------------*** End of GENERAL section ***------------------------
#-----------------------------------------------------------------------------
# CREATEDATABASE section is used when OPERATION_TYPE is defined as "createDatabase".
#-----------------------------------------------------------------------------
[CREATEDATABASE]
#-----------------------------------------------------------------------------
# Name : GDBNAME
# Datatype : String
# Description : Global database name of the database
# Valid values : <db_name>.<db_domain> - when database domain isn't NULL
# <db_name> - when database domain is NULL
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
GDBNAME = "ecis"
#-----------------------------------------------------------------------------
# Name : RACONENODE
# Datatype : Boolean
# Description : Set to true for RAC One Node database
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#RACONENODE = "false"
#-----------------------------------------------------------------------------
# Name : RACONENODESERVICENAME
# Datatype : String
# Description : Service is required by application to connect to RAC One
# Node Database
# Valid values : Service Name
# Default value : None
# Mandatory : No [required in case RACONENODE flag is set to true]
#-----------------------------------------------------------------------------
#RACONENODESERVICENAME =
#-----------------------------------------------------------------------------
# Name : POLICYMANAGED
# Datatype : Boolean
# Description : Set to true if Database is policy managed and
# set to false if Database is admin managed
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#POLICYMANAGED = "false"
#-----------------------------------------------------------------------------
# Name : CREATESERVERPOOL
# Datatype : Boolean
# Description : Set to true if new server pool need to be created for database
# if this option is specified then the newly created database
# will use this newly created serverpool.
# Multiple serverpoolname can not be specified for database
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#CREATESERVERPOOL = "false"
#-----------------------------------------------------------------------------
# Name : FORCE
# Datatype : Boolean
# Description : Set to true if new server pool need to be created by force
# if this option is specified then the newly created serverpool
# will be assigned server even if no free servers are available.
# This may affect already running database.
# This flag can be specified for Admin managed as well as policy managed db.
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#FORCE = "false"
#-----------------------------------------------------------------------------
# Name : SERVERPOOLNAME
# Datatype : String
# Description : Only one serverpool name need to be specified
# if Create Server Pool option is specified.
# Comma-separated list of Serverpool names if db need to use
# multiple Server pool
# Valid values : ServerPool name
# Default value : None
# Mandatory : No [required in case of RAC service centric database]
#-----------------------------------------------------------------------------
#SERVERPOOLNAME =
#-----------------------------------------------------------------------------
# Name : CARDINALITY
# Datatype : Number
# Description : Specify Cardinality for create server pool operation
# Valid values : any positive Integer value
# Default value : Number of qualified nodes on cluster
# Mandatory : No [Required when a new serverpool need to be created]
#-----------------------------------------------------------------------------
#CARDINALITY =
#-----------------------------------------------------------------------------
# Name : SID
# Datatype : String
# Description : System identifier (SID) of the database
# Valid values : Check Oracle11g Administrator's Guide
# Default value : <db_name> specified in GDBNAME
# Mandatory : No
#-----------------------------------------------------------------------------
SID = "ecis"
#-----------------------------------------------------------------------------
# Name : NODELIST
# Datatype : String
# Description : Comma-separated list of cluster nodes
# Valid values : Cluster node names
# Default value : None
# Mandatory : No (Yes for RAC database-centric database )
#-----------------------------------------------------------------------------
#NODELIST=
#-----------------------------------------------------------------------------
# Name : TEMPLATENAME
# Datatype : String
# Description : Name of the template
# Valid values : Template file name
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
TEMPLATENAME = "General_Purpose.dbc"
#-----------------------------------------------------------------------------
# Name : OBFUSCATEDPASSWORDS
# Datatype : Boolean
# Description : Set to true if passwords are encrypted
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#OBFUSCATEDPASSWORDS = FALSE
#-----------------------------------------------------------------------------
# Name : SYSPASSWORD
# Datatype : String
# Description : Password for SYS user
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
#SYSPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : SYSTEMPASSWORD
# Datatype : String
# Description : Password for SYSTEM user
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
#SYSTEMPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : EMCONFIGURATION
# Datatype : String
# Description : Enterprise Manager Configuration Type
# Valid values : CENTRAL|LOCAL|ALL|NONE
# Default value : NONE
# Mandatory : No
#-----------------------------------------------------------------------------
#EMCONFIGURATION = "NONE"
#-----------------------------------------------------------------------------
# Name : DISABLESECURITYCONFIGURATION
# Datatype : String
# Description : Database Security Settings
# Valid values : ALL|NONE|AUDIT|PASSWORD_PROFILE
# Default value : NONE
# Mandatory : No
#-----------------------------------------------------------------------------
#DISABLESECURITYCONFIGURATION = "NONE"
#-----------------------------------------------------------------------------
# Name : SYSMANPASSWORD
# Datatype : String
# Description : Password for SYSMAN user
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes, if LOCAL specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#SYSMANPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : DBSNMPPASSWORD
# Datatype : String
# Description : Password for DBSNMP user
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes, if EMCONFIGURATION is specified
#-----------------------------------------------------------------------------
#DBSNMPPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : CENTRALAGENT
# Datatype : String
# Description : Grid Control Central Agent Oracle Home
# Default value : None
# Mandatory : Yes, if CENTRAL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#CENTRALAGENT =
#-----------------------------------------------------------------------------
# Name : HOSTUSERNAME
# Datatype : String
# Description : Host user name for EM backup job
# Default value : None
# Mandatory : Yes, if ALL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#HOSTUSERNAME =
#-----------------------------------------------------------------------------
# Name : HOSTUSERPASSWORD
# Datatype : String
# Description : Host user password for EM backup job
# Default value : None
# Mandatory : Yes, if ALL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#HOSTUSERPASSWORD=
#-----------------------------------------------------------------------------
# Name : BACKUPSCHEDULE
# Datatype : String
# Description : Daily backup schedule in the form of hh:mm
# Default value : 2:00
# Mandatory : Yes, if ALL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#BACKUPSCHEDULE=
#-----------------------------------------------------------------------------
# Name : DVOWNERNAME
# Datatype : String
# Description : DataVault Owner
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes, if DataVault option is chosen
#-----------------------------------------------------------------------------
#DVOWNERNAME = ""
#-----------------------------------------------------------------------------
# Name : DVOWNERPASSWORD
# Datatype : String
# Description : Password for DataVault Owner
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes, if DataVault option is chosen
#-----------------------------------------------------------------------------
#DVOWNERPASSWORD = ""
#-----------------------------------------------------------------------------
# Name : DVACCOUNTMANAGERNAME
# Datatype : String
# Description : DataVault Account Manager
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
#DVACCOUNTMANAGERNAME = ""
#-----------------------------------------------------------------------------
# Name : DVACCOUNTMANAGERPASSWORD
# Datatype : String
# Description : Password for DataVault Account Manager
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
#DVACCOUNTMANAGERPASSWORD = ""
#-----------------------------------------------------------------------------
# Name : DATAFILEJARLOCATION
# Datatype : String
# Description : Location of the data file jar
# Valid values : Directory containing compressed datafile jar
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
#DATAFILEJARLOCATION =
#-----------------------------------------------------------------------------
# Name : DATAFILEDESTINATION
# Datatype : String
# Description : Location of the data file's
# Valid values : Directory for all the database files
# Default value : $ORACLE_BASE/oradata
# Mandatory : No
#-----------------------------------------------------------------------------
#DATAFILEDESTINATION =
#-----------------------------------------------------------------------------
# Name : RECOVERYAREADESTINATION
# Datatype : String
# Description : Location of the data file's
# Valid values : Recovery Area location
# Default value : $ORACLE_BASE/flash_recovery_area
# Mandatory : No
#-----------------------------------------------------------------------------
#RECOVERYAREADESTINATION=
#-----------------------------------------------------------------------------
# Name : STORAGETYPE
# Datatype : String
# Description : Specifies the storage on which the database is to be created
# Valid values : FS (CFS for RAC), ASM
# Default value : FS
# Mandatory : No
#-----------------------------------------------------------------------------
#STORAGETYPE=FS
#-----------------------------------------------------------------------------
# Name : DISKGROUPNAME
# Datatype : String
# Description : Specifies the disk group name for the storage
# Default value : DATA
# Mandatory : No
#-----------------------------------------------------------------------------
#DISKGROUPNAME=DATA
#-----------------------------------------------------------------------------
# Name : ASMSNMP_PASSWORD
# Datatype : String
# Description : Password for ASM Monitoring
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
#ASMSNMP_PASSWORD=""
#-----------------------------------------------------------------------------
# Name : RECOVERYGROUPNAME
# Datatype : String
# Description : Specifies the disk group name for the recovery area
# Default value : RECOVERY
# Mandatory : No
#-----------------------------------------------------------------------------
#RECOVERYGROUPNAME=RECOVERY
#-----------------------------------------------------------------------------
# Name : CHARACTERSET
# Datatype : String
# Description : Character set of the database
# Valid values : Check Oracle11g National Language Support Guide
# Default value : "US7ASCII"
# Mandatory : NO
#-----------------------------------------------------------------------------
#CHARACTERSET = "ZHS16GBK"
#-----------------------------------------------------------------------------
# Name : NATIONALCHARACTERSET
# Datatype : String
# Description : National Character set of the database
# Valid values : "UTF8" or "AL16UTF16". For details, check Oracle11g National Language Support Guide
# Default value : "AL16UTF16"
# Mandatory : No
#-----------------------------------------------------------------------------
NATIONALCHARACTERSET= "AL16UTF16"
#-----------------------------------------------------------------------------
# Name : REGISTERWITHDIRSERVICE
# Datatype : Boolean
# Description : Specifies whether to register with Directory Service.
# Valid values : TRUE FALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#REGISTERWITHDIRSERVICE= TRUE
#-----------------------------------------------------------------------------
# Name : DIRSERVICEUSERNAME
# Datatype : String
# Description : Specifies the name of the directory service user
# Mandatory : YES, if the value of registerWithDirService is TRUE
#-----------------------------------------------------------------------------
#DIRSERVICEUSERNAME= "name"
#-----------------------------------------------------------------------------
# Name : DIRSERVICEPASSWORD
# Datatype : String
# Description : The password of the directory service user.
# You can also specify the password at the command prompt instead of here.
# Mandatory : YES, if the value of registerWithDirService is TRUE
#-----------------------------------------------------------------------------
#DIRSERVICEPASSWORD= "password"
#-----------------------------------------------------------------------------
# Name : WALLETPASSWORD
# Datatype : String
# Description : The password for wallet to created or modified.
# You can also specify the password at the command prompt instead of here.
# Mandatory : YES, if the value of registerWithDirService is TRUE
#-----------------------------------------------------------------------------
#WALLETPASSWORD= "password"
#-----------------------------------------------------------------------------
# Name : LISTENERS
# Datatype : String
# Description : Specifies list of listeners to register the database with.
# By default the database is configured for all the listeners specified in the
# $ORACLE_HOME/network/admin/listener.ora
# Valid values : The list should be space separated names like "listener1 listener2".
# Mandatory : NO
#-----------------------------------------------------------------------------
#LISTENERS = "listener1 listener2"
#-----------------------------------------------------------------------------
# Name : VARIABLESFILE
# Datatype : String
# Description : Location of the file containing variable value pair
# Valid values : A valid file-system file. The variable value pair format in this file
# is <variable>=<value>. Each pair should be in a new line.
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
#VARIABLESFILE =
#-----------------------------------------------------------------------------
# Name : VARIABLES
# Datatype : String
# Description : comma separated list of name=value pairs. Overrides variables defined in variablefile and templates
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
#VARIABLES =
#-----------------------------------------------------------------------------
# Name : INITPARAMS
# Datatype : String
# Description : comma separated list of name=value pairs. Overrides initialization parameters defined in templates
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
#INITPARAMS =
#-----------------------------------------------------------------------------
# Name : SAMPLESCHEMA
# Datatype : Boolean
# Description : Specifies whether or not to add the Sample Schemas to your database
# Valid values : TRUE FALSE
# Default value : FASLE
# Mandatory : No
#-----------------------------------------------------------------------------
#SAMPLESCHEMA=TRUE
#-----------------------------------------------------------------------------
# Name : MEMORYPERCENTAGE
# Datatype : String
# Description : percentage of physical memory for Oracle
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
#MEMORYPERCENTAGE = "40"
#-----------------------------------------------------------------------------
# Name : DATABASETYPE
# Datatype : String
# Description : used for memory distribution when MEMORYPERCENTAGE specified
# Valid values : MULTIPURPOSE|DATA_WAREHOUSING|OLTP
# Default value : MULTIPURPOSE
# Mandatory : NO
#-----------------------------------------------------------------------------
#DATABASETYPE = "MULTIPURPOSE"
#-----------------------------------------------------------------------------
# Name : AUTOMATICMEMORYMANAGEMENT
# Datatype : Boolean
# Description : flag to indicate Automatic Memory Management is used
# Valid values : TRUE/FALSE
# Default value : TRUE
# Mandatory : NO
#-----------------------------------------------------------------------------
#AUTOMATICMEMORYMANAGEMENT = "TRUE"
#-----------------------------------------------------------------------------
# Name : TOTALMEMORY
# Datatype : String
# Description : total memory in MB to allocate to Oracle
# Valid values :
# Default value :
# Mandatory : NO
#-----------------------------------------------------------------------------
#TOTALMEMORY = "1024"
#-----------------------*** End of CREATEDATABASE section ***------------------------
#-----------------------------------------------------------------------------
# createTemplateFromDB section is used when OPERATION_TYPE is defined as "createTemplateFromDB".
#-----------------------------------------------------------------------------
[createTemplateFromDB]
#-----------------------------------------------------------------------------
# Name : SOURCEDB
# Datatype : String
# Description : The source database from which to create the template
# Valid values : The format is <host>:<port>:<sid>
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
SOURCEDB = "myhost:1521:orcl"
#-----------------------------------------------------------------------------
# Name : SYSDBAUSERNAME
# Datatype : String
# Description : A user with DBA role.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
SYSDBAUSERNAME = "system"
#-----------------------------------------------------------------------------
# Name : SYSDBAPASSWORD
# Datatype : String
# Description : The password of the DBA user.
# You can also specify the password at the command prompt instead of here.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
#SYSDBAPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : TEMPLATENAME
# Datatype : String
# Description : Name for the new template.
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
TEMPLATENAME = "My Copy TEMPLATE"
#-----------------------*** End of createTemplateFromDB section ***------------------------
#-----------------------------------------------------------------------------
# createCloneTemplate section is used when OPERATION_TYPE is defined as "createCloneTemplate".
#-----------------------------------------------------------------------------
[createCloneTemplate]
#-----------------------------------------------------------------------------
# Name : SOURCEDB
# Datatype : String
# Description : The source database is the SID from which to create the template.
# This database must be local and on the same ORACLE_HOME.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
SOURCEDB = "orcl"
#-----------------------------------------------------------------------------
# Name : SYSDBAUSERNAME
# Datatype : String
# Description : A user with DBA role.
# Default value : none
# Mandatory : YES, if no OS authentication
#-----------------------------------------------------------------------------
#SYSDBAUSERNAME = "sys"
#-----------------------------------------------------------------------------
# Name : SYSDBAPASSWORD
# Datatype : String
# Description : The password of the DBA user.
# You can also specify the password at the command prompt instead of here.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
#SYSDBAPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : TEMPLATENAME
# Datatype : String
# Description : Name for the new template.
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
TEMPLATENAME = "My Clone TEMPLATE"
#-----------------------------------------------------------------------------
# Name : DATAFILEJARLOCATION
# Datatype : String
# Description : Location of the data file jar
# Valid values : Directory where the new compressed datafile jar will be placed
# Default value : $ORACLE_HOME/assistants/dbca/templates
# Mandatory : NO
#-----------------------------------------------------------------------------
#DATAFILEJARLOCATION =
#-----------------------*** End of createCloneTemplate section ***------------------------
#-----------------------------------------------------------------------------
# DELETEDATABASE section is used when DELETE_TYPE is defined as "deleteDatabase".
#-----------------------------------------------------------------------------
[DELETEDATABASE]
#-----------------------------------------------------------------------------
# Name : SOURCEDB
# Datatype : String
# Description : The source database is the SID
# This database must be local and on the same ORACLE_HOME.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
SOURCEDB = "orcl"
#-----------------------------------------------------------------------------
# Name : SYSDBAUSERNAME
# Datatype : String
# Description : A user with DBA role.
# Default value : none
# Mandatory : YES, if no OS authentication
#-----------------------------------------------------------------------------
#SYSDBAUSERNAME = "sys"
#-----------------------------------------------------------------------------
# Name : SYSDBAPASSWORD
# Datatype : String
# Description : The password of the DBA user.
# You can also specify the password at the command prompt instead of here.
# Default value : none
# Mandatory : YES, if no OS authentication
#-----------------------------------------------------------------------------
#SYSDBAPASSWORD = "password"
#-----------------------*** End of deleteDatabase section ***------------------------
#-----------------------------------------------------------------------------
# GENERATESCRIPTS section
#-----------------------------------------------------------------------------
[generateScripts]
#-----------------------------------------------------------------------------
# Name : TEMPLATENAME
# Datatype : String
# Description : Name of the template
# Valid values : Template name as seen in DBCA
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
TEMPLATENAME = "New Database"
#-----------------------------------------------------------------------------
# Name : GDBNAME
# Datatype : String
# Description : Global database name of the database
# Valid values : <db_name>.<db_domain> - when database domain isn't NULL
# <db_name> - when database domain is NULL
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
GDBNAME = "orcl11.us.oracle.com"
#-----------------------------------------------------------------------------
# Name : SCRIPTDESTINATION
# Datatype : String
# Description : Location of the scripts
# Valid values : Directory for all the scripts
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
#SCRIPTDESTINATION =
#-----------------------*** End of deleteDatabase section ***------------------------
#-----------------------------------------------------------------------------
# CONFIGUREDATABASE section is used when OPERATION_TYPE is defined as "configureDatabase".
#-----------------------------------------------------------------------------
[CONFIGUREDATABASE]
#-----------------------------------------------------------------------------
# Name : SOURCEDB
# Datatype : String
# Description : The source database is the SID
# This database must be local and on the same ORACLE_HOME.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
#SOURCEDB = "orcl"
#-----------------------------------------------------------------------------
# Name : SYSDBAUSERNAME
# Datatype : String
# Description : A user with DBA role.
# Default value : none
# Mandatory : YES, if no OS authentication
#-----------------------------------------------------------------------------
#SYSDBAUSERNAME = "sys"
#-----------------------------------------------------------------------------
# Name : SYSDBAPASSWORD
# Datatype : String
# Description : The password of the DBA user.
# You can also specify the password at the command prompt instead of here.
# Default value : none
# Mandatory : YES, if no OS authentication
#-----------------------------------------------------------------------------
#SYSDBAPASSWORD =
#-----------------------------------------------------------------------------
# Name : REGISTERWITHDIRSERVICE
# Datatype : Boolean
# Description : Specifies whether to register with Directory Service.
# Valid values : TRUE FALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#REGISTERWITHDIRSERVICE= TRUE
#-----------------------------------------------------------------------------
# Name : UNREGISTERWITHDIRSERVICE
# Datatype : Boolean
# Description : Specifies whether to unregister with Directory Service.
# Valid values : TRUE FALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#UNREGISTERWITHDIRSERVICE= TRUE
#-----------------------------------------------------------------------------
# Name : REGENERATEDBPASSWORD
# Datatype : Boolean
# Description : Specifies whether regenerate database password in OID/Wallet
# Valid values : TRUE FALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#REGENERATEDBPASSWORD= TRUE
#-----------------------------------------------------------------------------
# Name : DIRSERVICEUSERNAME
# Datatype : String
# Description : Specifies the name of the directory service user
# Mandatory : YES, if the any of the reg/unreg/regenPasswd options specified
#-----------------------------------------------------------------------------
#DIRSERVICEUSERNAME= "name"
#-----------------------------------------------------------------------------
# Name : DIRSERVICEPASSWORD
# Datatype : String
# Description : The password of the directory service user.
# You can also specify the password at the command prompt instead of here.
# Mandatory : YES, if the any of the reg/unreg/regenPasswd options specified
#-----------------------------------------------------------------------------
#DIRSERVICEPASSWORD= "password"
#-----------------------------------------------------------------------------
# Name : WALLETPASSWORD
# Datatype : String
# Description : The password for wallet to created or modified.
# You can also specify the password at the command prompt instead of here.
# Mandatory : YES, if the any of the reg/unreg/regenPasswd options specified
#-----------------------------------------------------------------------------
#WALLETPASSWORD= "password"
#-----------------------------------------------------------------------------
# Name : DISABLESECURITYCONFIGURATION
# Datatype : String
# Description : Database Security Settings
# Valid values : ALL|NONE|AUDIT|PASSWORD_PROFILE
# Default value : NONE
# Mandatory : No
#-----------------------------------------------------------------------------
#DISABLESECURITYCONFIGURATION = "NONE"
#-----------------------------------------------------------------------------
# Name : ENABLESECURITYCONFIGURATION
# Datatype : String
# Description : Database Security Settings
# Valid values : true|false
# Default value : true
# Mandatory : No
#-----------------------------------------------------------------------------
#ENABLESECURITYCONFIGURATION = "true"
#-----------------------------------------------------------------------------
# Name : EMCONFIGURATION
# Datatype : String
# Description : Enterprise Manager Configuration Type
# Valid values : CENTRAL|LOCAL|ALL|NONE
# Default value : NONE
# Mandatory : No
#-----------------------------------------------------------------------------
#EMCONFIGURATION = "NONE"
#-----------------------------------------------------------------------------
# Name : SYSMANPASSWORD
# Datatype : String
# Description : Password for SYSMAN user
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes, if LOCAL specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#SYSMANPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : DBSNMPPASSWORD
# Datatype : String
# Description : Password for DBSNMP user
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes, if EMCONFIGURATION is specified
#-----------------------------------------------------------------------------
#DBSNMPPASSWORD = "password"
#-----------------------------------------------------------------------------
# Name : CENTRALAGENT
# Datatype : String
# Description : Grid Control Central Agent Oracle Home
# Default value : None
# Mandatory : Yes, if CENTRAL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#CENTRALAGENT =
#-----------------------------------------------------------------------------
# Name : HOSTUSERNAME
# Datatype : String
# Description : Host user name for EM backup job
# Default value : None
# Mandatory : Yes, if ALL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#HOSTUSERNAME =
#-----------------------------------------------------------------------------
# Name : HOSTUSERPASSWORD
# Datatype : String
# Description : Host user password for EM backup job
# Default value : None
# Mandatory : Yes, if ALL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#HOSTUSERPASSWORD=
#-----------------------------------------------------------------------------
# Name : BACKUPSCHEDULE
# Datatype : String
# Description : Daily backup schedule in the form of hh:mm
# Default value : 2:00
# Mandatory : Yes, if ALL is specified for EMCONFIGURATION
#-----------------------------------------------------------------------------
#BACKUPSCHEDULE=
#-----------------------*** End of CONFIGUREDATABASE section ***------------------------
#-----------------------------------------------------------------------------
# ADDINSTANCE section is used when OPERATION_TYPE is defined as "addInstance".
#-----------------------------------------------------------------------------
[ADDINSTANCE]
#-----------------------------------------------------------------------------
# Name : DB_UNIQUE_NAME
# Datatype : String
# Description : DB Unique Name of the RAC database
# Valid values : <db_unique_name>
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
DB_UNIQUE_NAME = "orcl11g.us.oracle.com"
#-----------------------------------------------------------------------------
# Name : INSTANCENAME
# Datatype : String
# Description : RAC instance name to be added
# Valid values : Check Oracle11g Administrator's Guide
# Default value : <sid_prefix>+<highest_current_thread+1>
# Mandatory : No
#-----------------------------------------------------------------------------
#INSTANCENAME = "orcl1"
#-----------------------------------------------------------------------------
# Name : NODELIST
# Datatype : String
# Description : Node on which to add new instance
# (in 10gR2, instance addition is supported on 1 node at a time)
# Valid values : Cluster node name
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
NODELIST=
#-----------------------------------------------------------------------------
# Name : OBFUSCATEDPASSWORDS
# Datatype : Boolean
# Description : Set to true if passwords are encrypted
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#OBFUSCATEDPASSWORDS = FALSE
#-----------------------------------------------------------------------------
# Name : SYSDBAUSERNAME
# Datatype : String
# Description : A user with DBA role.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
SYSDBAUSERNAME = "sys"
#-----------------------------------------------------------------------------
# Name : SYSDBAPASSWORD
# Datatype : String
# Description : The password of the DBA user.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
#SYSDBAPASSWORD = "password"
#-----------------------*** End of ADDINSTANCE section ***------------------------
#-----------------------------------------------------------------------------
# DELETEINSTANCE section is used when OPERATION_TYPE is defined as "deleteInstance".
#-----------------------------------------------------------------------------
[DELETEINSTANCE]
#-----------------------------------------------------------------------------
# Name : DB_UNIQUE_NAME
# Datatype : String
# Description : DB Unique Name of the RAC database
# Valid values : <db_unique_name>
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
DB_UNIQUE_NAME = "orcl11g.us.oracle.com"
#-----------------------------------------------------------------------------
# Name : INSTANCENAME
# Datatype : String
# Description : RAC instance name to be deleted
# Valid values : Check Oracle11g Administrator's Guide
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
INSTANCENAME = "orcl11g"
#-----------------------------------------------------------------------------
# Name : NODELIST
# Datatype : String
# Description : Node on which instance to be deleted (SID) is located
# Valid values : Cluster node name
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
#NODELIST=
#-----------------------------------------------------------------------------
# Name : OBFUSCATEDPASSWORDS
# Datatype : Boolean
# Description : Set to true if passwords are encrypted
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
#OBFUSCATEDPASSWORDS = FALSE
#-----------------------------------------------------------------------------
# Name : SYSDBAUSERNAME
# Datatype : String
# Description : A user with DBA role.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
SYSDBAUSERNAME = "sys"
#-----------------------------------------------------------------------------
# Name : SYSDBAPASSWORD
# Datatype : String
# Description : The password of the DBA user.
# Default value : none
# Mandatory : YES
#-----------------------------------------------------------------------------
#SYSDBAPASSWORD = "password"
#-----------------------*** End of DELETEINSTANCE section ***------------------------
netca.rsp 样例
######################################################################
## Copyright(c) 1998, 2011 Oracle Corporation. All rights reserved. ##
## ##
## Specify values for the variables listed below to customize your ##
## installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## ##
## Please specify the values in the following format: ##
## ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## ##
######################################################################
## ##
## This sample response file causes the Oracle Net Configuration ##
## Assistant (NetCA) to complete an Oracle Net configuration during ##
## a custom install of the Oracle11g server which is similar to ##
## what would be created by the NetCA during typical Oracle11g ##
## install. It also documents all of the NetCA response file ##
## variables so you can create your own response file to configure ##
## Oracle Net during an install the way you wish. ##
## ##
######################################################################
[GENERAL]
RESPONSEFILE_VERSION="11.2"
CREATE_TYPE="CUSTOM"
#-------------------------------------------------------------------------------
# Name : SHOW_GUI
# Datatype : Boolean
# Description: This variable controls appearance/suppression of the NetCA GUI,
# Pre-req : N/A
# Default : TRUE
# Note:
# This must be set to false in order to run NetCA in silent mode.
# This is a substitute of "/silent" flag in the NetCA command line.
# The command line flag has precedence over the one in this response file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------------
#SHOW_GUI=false
#-------------------------------------------------------------------------------
# Name : LOG_FILE
# Datatype : String
# Description: If present, NetCA will log output to this file in addition to the
# standard out.
# Pre-req : N/A
# Default : NONE
# Note:
# This is a substitute of "/log" in the NetCA command line.
# The command line argument has precedence over the one in this response file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------------
#LOG_FILE=""/oracle11gHome/network/tools/log/netca.log""
[oracle.net.ca]
#INSTALLED_COMPONENTS;StringList;list of installed components
# The possible values for installed components are:
# "net8","server","client","aso", "cman", "javavm"
INSTALLED_COMPONENTS={"server","net8","javavm"}
#INSTALL_TYPE;String;type of install
# The possible values for install type are:
# "typical","minimal" or "custom"
INSTALL_TYPE=""custom""
#LISTENER_NUMBER;Number;Number of Listeners
# A typical install sets one listener
LISTENER_NUMBER=1
#LISTENER_NAMES;StringList;list of listener names
# The values for listener are:
# "LISTENER","LISTENER1","LISTENER2","LISTENER3", ...
# A typical install sets only "LISTENER"
LISTENER_NAMES={"LISTENER"}
#LISTENER_PROTOCOLS;StringList;list of listener addresses (protocols and parameters separated by semicolons)
# The possible values for listener protocols are:
# "TCP;1521","TCPS;2484","NMP;ORAPIPE","IPC;IPCKEY","VI;1521"
# A typical install sets only "TCP;1521"
LISTENER_PROTOCOLS={"TCP;1521"}
#LISTENER_START;String;name of the listener to start, in double quotes
LISTENER_START=""LISTENER""
#NAMING_METHODS;StringList;list of naming methods
# The possible values for naming methods are:
# LDAP, TNSNAMES, ONAMES, HOSTNAME, NOVELL, NIS, DCE
# A typical install sets only: "TNSNAMES","ONAMES","HOSTNAMES"
# or "LDAP","TNSNAMES","ONAMES","HOSTNAMES" for LDAP
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
#NOVELL_NAMECONTEXT;String;Novell Directory Service name context, in double quotes
# A typical install does not use this variable.
#NOVELL_NAMECONTEXT = ""NAMCONTEXT""
#SUN_METAMAP;String; SUN meta map, in double quotes
# A typical install does not use this variable.
#SUN_METAMAP = ""MAP""
#DCE_CELLNAME;String;DCE cell name, in double quotes
# A typical install does not use this variable.
#DCE_CELLNAME = ""CELL""
#NSN_NUMBER;Number;Number of NetService Names
# A typical install sets one net service name
NSN_NUMBER=1
#NSN_NAMES;StringList;list of Net Service names
# A typical install sets net service name to "EXTPROC_CONNECTION_DATA"
NSN_NAMES={"EXTPROC_CONNECTION_DATA"}
#NSN_SERVICE;StringList;Oracle11g database's service name
# A typical install sets Oracle11g database's service name to "PLSExtProc"
NSN_SERVICE={"PLSExtProc"}
#NSN_PROTOCOLS;StringList;list of coma separated strings of Net Service Name protocol parameters
# The possible values for net service name protocol parameters are:
# "TCP;HOSTNAME;1521","TCPS;HOSTNAME;2484","NMP;COMPUTERNAME;ORAPIPE","VI;HOSTNAME;1521","IPC;IPCKEY"
# A typical install sets parameters to "IPC;EXTPROC"
NSN_PROTOCOLS={"TCP;HOSTNAME;1521"}