第五部分shell项目一监控脚本

需求： 使用shell定制各种个性化告警工具，但需要统一化管理、规范化管理。

思路：指定一个脚本包，包含主程序、子程序、配置文件、邮件引擎、输出日志等。
主程序：作为整个脚本的入口，是整个系统的命脉。
配置文件：是一个控制中心，用它来开关各个子程序，指定各个相关联的日志文件。
子程序：这个才是真正的监控脚本，用来监控各个指标。
邮件引擎：是由一个php程序来实现，它可以定义发邮件的服务器、发邮件人以及收邮件人。
输出日志：整个监控系统要有日志输出。

要求：我们的机器角色多种多样，但是所有机器上都要部署同样的监控系统，也就说所有机器不管什么角色，整个程序框架都是一致的，不同的地方在于根据不同的角色，定制不同的配置文件。

程序架构：

主目录 mon
| | | | |
bin conf shares mail log
| | | | |
[main.sh] [ mon.conf] [load.sh 502.sh] [mail.php mail.sh] [ mon.log err.log ]

cd /usr/local/
mkdir mon
cd mon
mkdir bin conf shares mail log
tree ../mon

其中bin下是主程序，conf下是配置文件，shares下是各个监控脚本，mail下是邮件引擎，log下是日志。
下面我发出几个示例脚本

1. main.sh
1. #!/bin/bash
2. #Written by aming.
3.
4. export send=1 #声明一个全局的变量，发邮件的开关，1就发，0不发
5. export addr=`/sbin/ifconfig |grep -A1 'eth0' |grep addr: |awk '{print $2}'|awk -F: '{print $2}'`
6. dir=`pwd`
7. last_dir=`echo $dir|awk -F'/' '{print $NF}'`
8.
9. if [ $last_dir == "bin" ] || [ $last_dir == "bin/" ]; then
10. conf_file="../conf/mon.conf" #配置文件所在的目录，上面的意思是要执行主要程序必须要进入到bin下才可以执行
11. else
12. echo "you shoud cd bin dir"
13. exit
14. fi
15. exec 1>>../log/mon.log 2>>../log/err.log #exec 是用来输出日志的，是记录下面的日志的
16.
17. echo "`date +"%F %T"` load average"
18. /bin/bash ../shares/load.sh #上面输出时间，然后执行他的子脚本
19. #下面是监控负载的，监控502，这里有个开关，上面没有，下面的等于1就执行下面的脚本
20. if grep -q 'to_mon_502=1' $conf_file; then
21. export log=`grep 'logfile=' $conf_file |awk -F '=' '{print $2}' |sed 's/ //g'`
22. /bin/bash ../shares/502.sh
#监控就必须知道访问日志，上面就是根据配置文件来得到访问日志
23. fi
24.

2. mon.conf

1. ## to config the options if to monitor
2.
3. ## cdb
4. to_mon_cdb=0 ##0 or 1, default 0,0 not monitor, 1 monitor
5. cdb_ip=10.20.3.13
6. cdb_port=3315
7. cdb_user=username
8. cdb_pass=passwd
9.
10. ## httpd
11. to_mon_httpd=0
12.
13. ## php
14. to_mon_php_socket=0
15.
16. ## http_code_502
17. to_mon_502=1
18. logfile=/data/log/xxx.xxx.com/access.log
19.
20. ## request_count请求数量
21. to_mon_request_count=0
22. req_log=/data/log/www.discuz.net/access.log
23. domainname=www.discuz.net
24.
25. ## analyse access log avoid wget or curl
26. to_mon_log=0
27.

load是用w和uptime查看 求倒数第三个字段，一分钟之内系统的负载值，有多少进程有多少任务在使用你的cpu

3. load.sh

1. #! /bin/bash
2.
3. ##Writen by aming##
4.
5. load=`uptime |awk -F 'average:' '{print $2}'|cut -d',' -f1|sed 's/ //g' |cut -d. -f1`
6. if [ $load -gt 20 ] && [ $send -eq "1" ]
7. then
8. echo "$addr `date +%T` load is $load" >../log/load.tmp
9. /bin/bash ../mail/mail.sh $addr\_load $load ../log/load.tmp
10. fi
11. echo "`date +%T` load is $load" #如果不大于20，这里就不执行了
12.

 

/etc/init.d/nginx reload 他网站产生的日志，查看他的状态码，在视频30分钟

4. 502.sh
1.
2. #! /bin/bash
3. d=`date -d "-1 min" +%H:%M` #一分钟检查一次
4. c_502=`grep :$d: $log |grep ' 502 '|wc -l` #检测获得502有几次
5. if [ $c_502 -gt 10 ] && [ $send == 1 ]; then
6. echo "$addr $d 502 count is $c_502">../log/502.tmp #记录临时文件，发给指定的人
7. /bin/bash ../mail/mail.sh $addr\_502 $c_502 ../log/502.tmp
8. fi
9. echo "`date +%T` 502 $c_502"
10.

 

5. mail.php
<?php
class Smtp
{
/* Public Variables */
var $smtp_port;
var $time_out;
var $host_name;
var $log_file;
var $relay_host;
var $debug;
var $auth;
var $user;
var $pass;
/* Private Variables */
var $sock;
/* Constractor */
function Smtp($relay_host = "", $smtp_port = 25,$auth = false,$user,$pass)
{
$this->debug = FALSE;
$this->smtp_port = $smtp_port;
$this->relay_host = $relay_host;
$this->time_out = 30; //is used in fsockopen()
#
$this->auth = $auth;//auth
$this->user = $user;
$this->pass = $pass;
#
$this->host_name = "localhost"; //is used in HELO command
$this->log_file = "";
$this->sock = FALSE;
}
/* Main Function */
function sendmail($to, $from, $subject = "", $body = "", $mailtype, $cc = "", $bcc = "", $additional_headers = "")
{
$mail_from = $this->get_address($this->strip_comment($from));
$body = ereg_replace("(^|( ))(.)", "1.3", $body);
$header = "MIME-Version:1.0 ";
if($mailtype=="HTML"){
$header .= "Content-Type:text/html ";
}
$header .= "To: ".$to." ";
if ($cc != "") {
$header .= "Cc: ".$cc." ";
}
$header .= "From: $from<".$from."> ";
$header .= "Subject: ".$subject." ";
$header .= $additional_headers;
$header .= "Date: ".date("r")." ";
$header .= "X-Mailer:By Redhat (PHP/".phpversion().") ";
list($msec, $sec) = explode(" ", microtime());
$header .= "Message-ID: <".date("YmdHis", $sec).".".($msec*1000000).".".$mail_from."> ";
$TO = explode(",", $this->strip_comment($to));
if ($cc != "") {
$TO = array_merge($TO, explode(",", $this->strip_comment($cc)));
}

if ($bcc != "") {
$TO = array_merge($TO, explode(",", $this->strip_comment($bcc)));
}
$sent = TRUE;
foreach ($TO as $rcpt_to) {
$rcpt_to = $this->get_address($rcpt_to);

if (!$this->smtp_sockopen($rcpt_to)) {
$this->log_write("Error: Cannot send email to ".$rcpt_to." ");
$sent = FALSE;
continue;
}
if ($this->smtp_send($this->host_name, $mail_from, $rcpt_to, $header, $body)) {
$this->log_write("E-mail has been sent to <".$rcpt_to."> ");
} else {
$this->log_write("Error: Cannot send email to <".$rcpt_to."> ");
$sent = FALSE;
}
fclose($this->sock);
$this->log_write("Disconnected from remote host ");
}
return $sent;
}
/* Private Functions */
function smtp_send($helo, $from, $to, $header, $body = "")
{
if (!$this->smtp_putcmd("HELO", $helo)) {
return $this->smtp_error("sending HELO command");
}
#auth
if($this->auth){
if (!$this->smtp_putcmd("AUTH LOGIN", base64_encode($this->user))) {
return $this->smtp_error("sending HELO command");
}
if (!$this->smtp_putcmd("", base64_encode($this->pass))) {
return $this->smtp_error("sending HELO command");
}
}
#
if (!$this->smtp_putcmd("MAIL", "FROM:<".$from.">")) {
return $this->smtp_error("sending MAIL FROM command");
}
if (!$this->smtp_putcmd("RCPT", "TO:<".$to.">")) {
return $this->smtp_error("sending RCPT TO command");
}
if (!$this->smtp_putcmd("DATA")) {
return $this->smtp_error("sending DATA command");
}
if (!$this->smtp_message($header, $body)) {
return $this->smtp_error("sending message");
}
if (!$this->smtp_eom()) {
return $this->smtp_error("sending <CR><LF>.<CR><LF> [EOM]");
}
if (!$this->smtp_putcmd("QUIT")) {
return $this->smtp_error("sending QUIT command");
}
return TRUE;
}

function smtp_sockopen($address)
{
if ($this->relay_host == "") {
return $this->smtp_sockopen_mx($address);
} else {
return $this->smtp_sockopen_relay();
}
}
function smtp_sockopen_relay()
{
$this->log_write("Trying to ".$this->relay_host.":".$this->smtp_port." ");
$this->sock = @fsockopen($this->relay_host, $this->smtp_port, $errno, $errstr, $this->time_out);
if (!($this->sock && $this->smtp_ok())) {
$this->log_write("Error: Cannot connenct to relay host ".$this->relay_host." ");
$this->log_write("Error: ".$errstr." (".$errno.") ");
return FALSE;
}
$this->log_write("Connected to relay host ".$this->relay_host." ");
return TRUE;
}
function smtp_sockopen_mx($address)
{
$domain = ereg_replace("^.+@([^@]+)$", "1", $address);
if (!@getmxrr($domain, $MXHOSTS)) {
$this->log_write("Error: Cannot resolve MX "".$domain."" ");
return FALSE;
}
foreach ($MXHOSTS as $host) {
$this->log_write("Trying to ".$host.":".$this->smtp_port." ");
$this->sock = @fsockopen($host, $this->smtp_port, $errno, $errstr, $this->time_out);
if (!($this->sock && $this->smtp_ok())) {
$this->log_write("Warning: Cannot connect to mx host ".$host." ");
$this->log_write("Error: ".$errstr." (".$errno.") ");
continue;
}
$this->log_write("Connected to mx host ".$host." ");
return TRUE;
}
$this->log_write("Error: Cannot connect to any mx hosts (".implode(", ", $MXHOSTS).") ");
return FALSE;
}
function smtp_message($header, $body)
{
fputs($this->sock, $header." ".$body);
$this->smtp_debug("> ".str_replace(" ", " "."> ", $header." > ".$body." > "));
return TRUE;
}
function smtp_eom()
{
fputs($this->sock, " . ");
$this->smtp_debug(". [EOM] ");
return $this->smtp_ok();
}
function smtp_ok()
{
$response = str_replace(" ", "", fgets($this->sock, 512));
$this->smtp_debug($response." ");
if (!ereg("^[23]", $response)) {
fputs($this->sock, "QUIT ");
fgets($this->sock, 512);
$this->log_write("Error: Remote host returned "".$response."" ");
return FALSE;
}
return TRUE;
}
function smtp_putcmd($cmd, $arg = "")
{
if ($arg != "") {
if($cmd=="") $cmd = $arg;
else $cmd = $cmd." ".$arg;
}
fputs($this->sock, $cmd." ");
$this->smtp_debug("> ".$cmd." ");
return $this->smtp_ok();
}
function smtp_error($string)
{
$this->log_write("Error: Error occurred while ".$string.". ");
return FALSE;
}
function log_write($message)
{
$this->smtp_debug($message);
if ($this->log_file == "") {
return TRUE;
}
$message = date("M d H:i:s ").get_current_user()."[".getmypid()."]: ".$message;
if (!@file_exists($this->log_file) || !($fp = @fopen($this->log_file, "a"))) {
$this->smtp_debug("Warning: Cannot open log file "".$this->log_file."" ");
return FALSE;;
}
flock($fp, LOCK_EX);
fputs($fp, $message);
fclose($fp);
return TRUE;
}
function strip_comment($address)
{
$comment = "([^()]*)";
while (ereg($comment, $address)) {
$address = ereg_replace($comment, "", $address);
}
return $address;
}
function get_address($address)
{
$address = ereg_replace("([ ])+", "", $address);
$address = ereg_replace("^.*<(.+)>.*$", "1", $address);
return $address;
}
function smtp_debug($message)
{
if ($this->debug) {
echo $message;
}
}
}
$file = $argv[2];
$smtpserver = "smtp.qq.com";//SMTP服务器
$smtpserverport = "25";//SMTP服务器端口
$smtpusermail = "1198658@qq.com";//SMTP服务器的用户邮箱，视频40分钟
$smtpemailto = "lishi@139.com";//发送给谁
$smtpuser = "1198658";//SMTP服务器的用户帐号，这个是独立账号
$smtppass = "1212lss";//SMTP服务器的用户密码，独立密码
$mailsubject = $argv[1];//邮件主题
$mailbody = file_get_contents($file);//邮件内容
$mailtype = "HTML";//邮件格式（HTML/TXT）,TXT为文本邮件
$smtp = new smtp($smtpserver,$smtpserverport,true,$smtpuser,$smtppass);//这里面的一个true是表示使用身份验证,否则不使用身份验证.
//$smtp->debug = TRUE;//是否显示发送的调试信息
$smtp->sendmail($smtpemailto, $smtpusermail, $mailsubject, $mailbody, $mailtype);
?>

要想发邮件的话，首先要有php支持，若你没有安装过lamp或者lnmp，则需要运行yum install -y php-cli 安装。
然后运行 php mail.php "邮箱主题写在这里" "/tmp/test.txt" 。其中，/tmp/test.txt 内容为邮件内容。

php -v 看他的版本

如果有报错，就是他没有定义时间
Asia/Chongqing

在配置文件 vim /etc/php.ini
搜索 /timezone 找到把他打开就可以了date.time = 'Asia/Chongqing'

 

发告警邮件的shell脚本，利用mail.php 发邮件

6. mail.sh
1. #! /bin/bash
2. log=$1
3. t_s=`date +%s`
4. t_s2=`date -d "2 hours ago" +%s` #这里是为了求两次告警的时间差值
5. if [ ! -f /tmp/$log ]
6. then
7. echo $t_s2 > /tmp/$log #差值通过这里获得
8. fi
9. t_s2=`tail -1 /tmp/$log|awk '{print $1}'`
10. echo $t_s>>/tmp/$log
11. v=$[$t_s-$t_s2]
12. #echo $v
13. if [ $v -gt 3600 ]
14. then
15. /usr/bin/php ../mail/mail.php "$1 $2" "$3" #$1 $2是发邮件的主题，$3是发邮件的文件
16. echo "0" > /tmp/$log.txt #上面发完告警后，给他清空
17. else
18. if [ ! -f /tmp/$log.txt ]
19. then
20. echo "0" > /tmp/$log.txt
21. fi
22. nu=`cat /tmp/$log.txt`
23. nu2=$[$nu+1]
24. echo $nu2>/tmp/$log.txt

25. if [ $nu2 -gt 10 ]
26. then
27. /dir/to/php ../mail/mail.php "trouble continue 10 min $1 $2 " "$3"
28. echo "0" > /tmp/$log.txt
29. fi
30. fi
31.