1.worker_processes 越大越好（一定数量后性能增加不明显）
2.worker_cpu_affinity 所有cpu平分worker_processes 要比每个worker_processes 都跨cpu分配性能要好;不考虑php的执行，测试结果worker_processes数量是cpu核数的2倍性能最优
3.unix domain socket（共享内存的方式）要比tcp网络端口配置性能要好
不考虑backlog，请求速度有量级的飞跃，但错误率超过50%
加上backlog，性能有10%左右提升
4.调整nginx、php-fpm和内核的backlog（积压），connect() to unix:/tmp/php-fpm.socket failed (11: Resource temporarily unavailable) while connecting to upstream错误的返回会减少
nginx：
配置文件的server块
listen 80 default backlog=1024;
php-fpm:
配置文件的
listen.backlog = 2048
kernel参数：
/etc/sysctl.conf，不能低于上面的配置
net.ipv4.tcp_max_syn_backlog = 4096
net.core.netdev_max_backlog = 4096
5.增加单台服务器上的php-fpm的master实例，会增加fpm的处理能力，也能减少报错返回的几率
多实例启动方法，使用多个配置文件：
/usr/local/php/sbin/php-fpm -y /usr/local/php/etc/php-fpm.conf &
/usr/local/php/sbin/php-fpm -y /usr/local/php/etc/php-fpm1.conf &
nginx的fastcgi配置
upstream phpbackend {
# server 127.0.0.1:9000 weight=100 max_fails=10 fail_timeout=30;
# server 127.0.0.1:9001 weight=100 max_fails=10 fail_timeout=30;
# server 127.0.0.1:9002 weight=100 max_fails=10 fail_timeout=30;
# server 127.0.0.1:9003 weight=100 max_fails=10 fail_timeout=30;
server unix:/var/www/php-fpm.sock weight=100 max_fails=10 fail_timeout=30;
server unix:/var/www/php-fpm1.sock weight=100 max_fails=10 fail_timeout=30;
server unix:/var/www/php-fpm2.sock weight=100 max_fails=10 fail_timeout=30;
server unix:/var/www/php-fpm3.sock weight=100 max_fails=10 fail_timeout=30;
# server unix:/var/www/php-fpm4.sock weight=100 max_fails=10 fail_timeout=30;
# server unix:/var/www/php-fpm5.sock weight=100 max_fails=10 fail_timeout=30;
# server unix:/var/www/php-fpm6.sock weight=100 max_fails=10 fail_timeout=30;
# server unix:/var/www/php-fpm7.sock weight=100 max_fails=10 fail_timeout=30;
}
location ~ .php* {
fastcgi_pass phpbackend;
# fastcgi_pass unix:/var/www/php-fpm.sock;
fastcgi_index index.php;
……….
}
6.测试环境和结果
内存2G
swap2G
cpu 2核 Intel(R) Xeon(R) CPU E5405 @ 2.00GHz
采用ab远程访问测试，测试程序为php的字符串处理程序
1）在开4个php-fpm实例，nginx 8个worker_processes 每个cpu4个worker_processes ，backlog为1024，php的backlog为2048，内核backlog为4096，采用unix domain socket连接的情况下，其他保持参数不变
性能和错误率较为平衡，可接受，超过4个fpm实例，性能开始下降，错误率并没有明显下降
结论是fpm实例数，worker_processes数和cpu保持倍数关系，性能较高
影响性能和报错的参数为
php-fpm实例，nginx worker_processes数量，fpm的max_request，php的backlog，unix domain socket
10W请求，500并发无报错，1000并发报错率为0.9%
500并发：
Time taken for tests: 25 seconds avg.
Complete requests: 100000
Failed requests: 0
Write errors: 0
Requests per second: 4000 [#/sec] (mean) avg.
Time per request: 122.313 [ms] (mean)
Time per request: 0.245 [ms] (mean, across all concurrent requests)
Transfer rate: 800 [Kbytes/sec] received avg.
1000并发：
Time taken for tests: 25 seconds avg.
Complete requests: 100000
Failed requests: 524
(Connect: 0, Length: 524, Exceptions: 0)
Write errors: 0
Non-2xx responses: 524
Requests per second: 3903.25 [#/sec] (mean)
Time per request: 256.197 [ms] (mean)
Time per request: 0.256 [ms] (mean, across all concurrent requests)
Transfer rate: 772.37 [Kbytes/sec] received
2）在其他参数不变，unix domain socket换为tcp网络端口连接，结果如下
500并发：
Concurrency Level: 500
Time taken for tests: 26.934431 seconds
Complete requests: 100000
Failed requests: 0
Write errors: 0
Requests per second: 3712.72 [#/sec] (mean)
Time per request: 134.672 [ms] (mean)
Time per request: 0.269 [ms] (mean, across all concurrent requests)
Transfer rate: 732.37 [Kbytes/sec] received
1000并发：
Concurrency Level: 1000
Time taken for tests: 28.385349 seconds
Complete requests: 100000
Failed requests: 0
Write errors: 0
Requests per second: 3522.94 [#/sec] (mean)
Time per request: 283.853 [ms] (mean)
Time per request: 0.284 [ms] (mean, across all concurrent requests)
Transfer rate: 694.94 [Kbytes/sec] received
与1）比较，有大约10%的性能下降
7. 调整fpm的max_request参数为1000，并发1000报错返回降到200个以下，
Transfer rate在800左右