内核启动时，常会打印出一些信息：开头是 "驱动模块的名字: + 具体的信息"
如：在运行的linux系统设备上，插入鼠标，就会打印出鼠标的相关信息;
[ 402.134068] input: USB Optical Mouse as /devices/soc0/soc/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.0/0003:0461:4D81.0003/input/input3
[ 402.149618] hid-generic 0003:0461:4D81.0003: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-ci_hdrc.0-1/input0
红色标注的 "input: " 是鼠标插入式，内核检测到，鼠标是输入设备，于是就把将鼠标与输入模块的驱动。
红色标注的"hid-generic 0003:0461:4D81.0003" 是鼠标匹配的驱动是输入模块的hid-generic驱动。
这样的信息输出通常都是有 dev_info/dev_err/dev_notice/....， 具体可参考：linux/include/linux/device.h文件中这些函数的定义。
这些函数的定义格式都是相同的，只是输出等级不同，即print_level不同。
dev_info(dev, “%s[%d] ”, __func__, __LINE__);
这是第一个参数不同，后两个就是printk的参数相同，格式也相同。
第一个参数dev: 就是将这个设备的模块的名字等信息相同, 最终还是调用printk打印出来.
通常，dev第一个参数的打信息，是用两个函数从dev中获取信息。
const char *dev_driver_string(const struct device *dev)
{
struct device_driver *drv;
/* dev->driver can change to NULL underneath us because of unbinding,
* so be careful about accessing it. dev->bus and dev->class should
* never change once they are set, so they don't need special care.
*/
drv = ACCESS_ONCE(dev->driver);
return drv ? drv->name :
(dev->bus ? dev->bus->name :
(dev->class ? dev->class->name : ""));
}
调用这个函数可以输出 "hid-generic"
static inline const char *dev_name(const struct device *dev)
{
/* Use the init name until the kobject becomes available */
if (dev->init_name)
return dev->init_name;
return kobject_name(&dev->kobj);
}
调用这个函数，可以输出" 0003: ......"
dev_driver_string() / dev_name() 是内核调试打印信息中常用的输出函数
---------------------
作者：香雨亭榭
来源：CSDN
原文：https://blog.csdn.net/hpu11/article/details/80688565
版权声明：本文为博主原创文章，转载请附上博文链接！
struct usb_interface {
/* array of alternate settings for this interface,
* stored in no particular order */
struct usb_host_interface *altsetting;
struct usb_host_interface *cur_altsetting; /* the currently
* active alternate setting */
unsigned num_altsetting; /* number of alternate settings */
/* If there is an interface association descriptor then it will list
* the associated interfaces */
struct usb_interface_assoc_descriptor *intf_assoc;
int minor; /* minor number this interface is
* bound to */
enum usb_interface_condition condition; /* state of binding */
unsigned sysfs_files_created:1; /* the sysfs attributes exist */
unsigned ep_devs_created:1; /* endpoint "devices" exist */
unsigned unregistering:1; /* unregistration is in progress */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
unsigned needs_binding:1; /* needs delayed unbind/rebind */
unsigned resetting_device:1; /* true: bandwidth alloc after reset */
unsigned authorized:1; /* used for interface authorization */
struct device dev; /* interface specific device info */
struct device *usb_dev;
atomic_t pm_usage_cnt; /* usage counter for autosuspend */
struct work_struct reset_ws; /* for resets in atomic context */
};
dev_name(&intf->dev)对应着USB的四元组信息，可以用这个信息，来判断设备的具体位置，然后根据该信息，给设备固定名字
cdc_acm 3-1:1.0: ttyACM0: USB ACM device