2019 SDN上机第2次作业

1.利用mininet创建如下拓扑，要求拓扑支持OpenFlow 1.3协议，主机名、交换机名以及端口对应正确，请给出拓扑Mininet执行结果，展示端口连接情况

1.1拓扑

1.2 代码

#!/usr/bin/python

from mininet.topo import Topo

class MyTopo( Topo ):
    "Simple topology example."
    def __init__( self ):
 
        # Initialize topology
        Topo.__init__( self )
        
        sw1 = self.addSwitch('s1')
        sw2 = self.addSwitch('s2')

        h1 = self.addHost('h1')
        h2 = self.addHost('h2')
        h3 = self.addHost('h3')
        h4 = self.addHost('h4')
        h5 = self.addHost('h5')
        h6 = self.addHost('h6')

        self.addLink(h1,sw1,1,1)
        self.addLink(h2,sw1,1,2)
        self.addLink(h3,sw1,1,3)
        self.addLink(sw1,sw2,4,4)
        self.addLink(h4,sw2,1,1)
        self.addLink(h5,sw2,1,2)
        self.addLink(h6,sw2,1,3)

topos = { 'mytopo': ( lambda: MyTopo() ) }

1.3创建

1.4使用net命令查看拓扑

1.5使用pingall命令测试所有节点连通性

2.直接在Open vSwitch下发流表，用vlan得到下列虚拟网段，请逐条说明所下发的流表含义

2.1流表

2.2含义

• 将主机1，2，3进入s1的包打上vlan tag，转发端口4

sudo ovs-ofctl -O OpenFlow13 add-flow s1  priority=1,in_port=1,actions=push_vlan:0x8100,set_field:4096->vlan_vid,output:4
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,in_port=2,actions=push_vlan:0x8100,set_field:4097->vlan_vid,output:4
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,in_port=3,actions=push_vlan:0x8100,set_field:4098->vlan_vid,output:4

• 将从端口4的包去除vlan tag， 并根据tag进行转发

sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,dl_vlan=0,actions=pop_vlan,output:1
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,dl_vlan=1,actions=pop_vlan,output:2
sudo ovs-ofctl -O OpenFlow13 add-flow s1 priority=1,dl_vlan=2,actions=pop_vlan,output:3

• 将主机4，5，6进入s2的包打上vlan tag，转发端口4

sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,in_port=1,actions=push_vlan:0x8100,set_field:4096->vlan_vid,output:4
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,in_port=2,actions=push_vlan:0x8100,set_field:4097->vlan_vid,output:4
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,in_port=3,actions=push_vlan:0x8100,set_field:4098->vlan_vid,output:4

• 将从端口4的包去除vlan tag， 并根据tag进行转发

sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,dl_vlan=0,actions=pop_vlan,output:1
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,dl_vlan=1,actions=pop_vlan,output:2
sudo ovs-ofctl -O OpenFlow13 add-flow s2 priority=1,dl_vlan=2,actions=pop_vlan,output:3

3. 直接在Open vSwitch查看流表，提交OVS命令执行结果

3.1命令

sudo ovs-ofctl dump-flows s1
sudo ovs-ofctl dump-flows s2

3.2结果

• s1
  
• s2
  

4. 提交主机连通性测试结果，验证流表的有效性

5. 利用Wireshark抓包，分析验证特定报文

5.1命令

sudo wireshark

5.2截图