Drainage Ditches（最大流）

Drainage Ditches

Time Limit: 1000MS		Memory Limit: 10000K
Total Submissions: 64044		Accepted: 24718

Description

Every time it rains on Farmer John's fields, a pond forms over Bessie's favorite clover patch. This means that the clover is covered by water for awhile and takes quite a long time to regrow. Thus, Farmer John has built a set of drainage ditches so that Bessie's clover patch is never covered in water. Instead, the water is drained to a nearby stream. Being an ace engineer, Farmer John has also installed regulators at the beginning of each ditch, so he can control at what rate water flows into that ditch.
Farmer John knows not only how many gallons of water each ditch can transport per minute but also the exact layout of the ditches, which feed out of the pond and into each other and stream in a potentially complex network.
Given all this information, determine the maximum rate at which water can be transported out of the pond and into the stream. For any given ditch, water flows in only one direction, but there might be a way that water can flow in a circle.

Input

The input includes several cases. For each case, the first line contains two space-separated integers, N (0 <= N <= 200) and M (2 <= M <= 200). N is the number of ditches that Farmer John has dug. M is the number of intersections points for those ditches. Intersection 1 is the pond. Intersection point M is the stream. Each of the following N lines contains three integers, Si, Ei, and Ci. Si and Ei (1 <= Si, Ei <= M) designate the intersections between which this ditch flows. Water will flow through this ditch from Si to Ei. Ci (0 <= Ci <= 10,000,000) is the maximum rate at which water will flow through the ditch.

Output

For each case, output a single integer, the maximum rate at which water may emptied from the pond.

Sample Input

5 4
1 2 40
1 4 20
2 4 20
2 3 30
3 4 10

Sample Output

50
代码：醉醉的超时。。。入门题。两种方法：
代码1：

#include<cstdio>
#include<iostream>
#include<cstring>
#include<cmath>
#include<queue>
#include<algorithm>
#define mem(x,y) memset(x,y,sizeof(x))
#include<queue>
using namespace std;
typedef long long LL;
const int INF=0x3f3f3f3f;
const int MAXN=210; 
int map[MAXN][MAXN];
queue<int>dl;
int vis[MAXN],pre[MAXN];
int N;
bool bfs(int s,int e){
    mem(vis,0);
    mem(pre,0);
    while(!dl.empty())dl.pop();
    vis[s]=1;dl.push(s);
    int a;
    while(!dl.empty()){
        a=dl.front();dl.pop();
        if(a==e)return true;
        for(int i=1;i<=N;i++){
            if(!vis[i]&&map[a][i]){
                vis[i]=1;
                dl.push(i);
                pre[i]=a;
            }
        }
    }
    return false;
}
LL maxflow(int s,int e){
    LL flow=0;
    while(bfs(s,e)){
        int r=e;
        int temp=INF;
        while(r!=s){
            temp=min(temp,map[pre[r]][r]);
            r=pre[r];
        }
        r=e;
        while(r!=s){
            map[pre[r]][r]-=temp;
            map[r][pre[r]]+=temp;
            r=pre[r];//这句话不能少。。 
        }
        flow+=temp;
    }
    return flow;
}
int main(){
    int M;
    while(~scanf("%d%d",&M,&N)){
        mem(map,0);
        int u,v,w;
        while(M--){
            scanf("%d%d%d",&u,&v,&w);
            map[u][v]+=w;
        }
        printf("%I64d
",maxflow(1,N));
    }
    return 0;
}

代码2：

#include<cstdio>
#include<iostream>
#include<cstring>
#include<cmath>
#include<queue>
#include<algorithm>
#define mem(x,y) memset(x,y,sizeof(x))
using namespace std;
const int INF=0x3f3f3f3f;
typedef long long LL;
const int MAXN=210;
const int MAXM=2020;
int head[MAXM];
int vis[MAXN],dis[MAXN];
int edgnum;
struct Node{
	int from,to,next,cup,flow;
};
Node edg[MAXM];
queue<int>dl;
void initial(){
	mem(head,-1);edgnum=0;
}
void add(int u,int v,int w){
	Node E={u,v,head[u],w,0};
	edg[edgnum]=E;
	head[u]=edgnum++;
	E={v,u,head[v],0,0};
	edg[edgnum]=E;
	head[v]=edgnum++;
}
bool bfs(int s,int e){
	mem(vis,0);mem(dis,-1);
	while(!dl.empty())dl.pop();
	vis[s]=1;dis[s]=0;dl.push(s);
	while(!dl.empty()){
		int u=dl.front();dl.pop();
	for(int i=head[u];i!=-1;i=edg[i].next){
		Node v=edg[i];
		if(!vis[v.to]&&v.cup>v.flow){//应该是> 
			vis[v.to]=1;
			dis[v.to]=dis[u]+1;
			if(v.to==e)return true;
			dl.push(v.to);
			}
		}
	}
	return false;
}
int dfs(int x,int la,int e){
	if(x==e||la==0)return la;
	int temp;
	LL flow=0;
	for(int i=head[x];i!=-1;i=edg[i].next){
		Node &v=edg[i];
		if(dis[v.to]==dis[x]+1&&(temp=dfs(v.to,min(la,v.cup-v.flow),e))>0){//这里也应该要> 
			v.flow+=temp;
			edg[i^1].flow-=temp;
			la-=temp;
			flow+=temp;
			if(la==0)break;//这个要判断 
		}
	}
	return flow;
}
LL maxflow(int s,int e){
	LL flow=0;
	while(bfs(s,e)){
		flow+=dfs(s,INF,e);
	}
	return flow;
}
int main(){
	int N,M;
	while(~scanf("%d%d",&N,&M)){
		initial();
		int u,v,w;
		while(N--){
			scanf("%d%d%d",&u,&v,&w);
			add(u,v,w);
		}	
		printf("%I64d
",maxflow(1,M));
	}
	return 0;
}