zoukankan      html  css  js  c++  java
  • Codeforces Round #327 (Div. 1) C. Three States

    C. Three States
    time limit per test
    5 seconds
    memory limit per test
    512 megabytes
    input
    standard input
    output
    standard output

    The famous global economic crisis is approaching rapidly, so the states of Berman, Berance and Bertaly formed an alliance and allowed the residents of all member states to freely pass through the territory of any of them. In addition, it was decided that a road between the states should be built to guarantee so that one could any point of any country can be reached from any point of any other State.

    Since roads are always expensive, the governments of the states of the newly formed alliance asked you to help them assess the costs. To do this, you have been issued a map that can be represented as a rectangle table consisting of n rows and m columns. Any cell of the map either belongs to one of three states, or is an area where it is allowed to build a road, or is an area where the construction of the road is not allowed. A cell is called passable, if it belongs to one of the states, or the road was built in this cell. From any passable cells you can move up, down, right and left, if the cell that corresponds to the movement exists and is passable.

    Your task is to construct a road inside a minimum number of cells, so that it would be possible to get from any cell of any state to any cell of any other state using only passable cells.

    It is guaranteed that initially it is possible to reach any cell of any state from any cell of this state, moving only along its cells. It is also guaranteed that for any state there is at least one cell that belongs to it.

    Input

    The first line of the input contains the dimensions of the map n and m (1 ≤ n, m ≤ 1000) — the number of rows and columns respectively.

    Each of the next n lines contain m characters, describing the rows of the map. Digits from 1 to 3 represent the accessory to the corresponding state. The character '.' corresponds to the cell where it is allowed to build a road and the character '#' means no construction is allowed in this cell.

    Output

    Print a single integer — the minimum number of cells you need to build a road inside in order to connect all the cells of all states. If such a goal is unachievable, print -1.

    Sample test(s)
    input
    4 5
    11..2
    #..22
    #.323
    .#333
    output
    2
    input
    1 5
    1#2#3
    
    output

    -1

    题意:有三个国家,要建造一些桥,使得三个国家能相互连通,问最少要造多少桥。

    思路:共有两种情况,一种是先使得两个国家连通,然后再使它们和另一个连通,还有一种是设一个点,造桥使得这三个国家都到这个点。


    #include<iostream>
    #include<stdio.h>
    #include<stdlib.h>
    #include<string.h>
    #include<math.h>
    #include<vector>
    #include<map>
    #include<set>
    #include<queue>
    #include<stack>
    #include<string>
    #include<algorithm>
    using namespace std;
    typedef long long ll;
    #define inf 99999999
    #define maxn 1005
    char s[maxn][maxn];
    int dist[maxn][maxn][4],vis[maxn][maxn];   //dsit[i][j][num]表示坐标为i,j的点到值为num所对的这个国家的最小要造的桥数
    int st[4][2],n,m;
    int ans[4][4];  //ans[i][j]表示i国家和j国家要连通所要造的桥的个数
    int tab[4][2]={0,1,-1,0,0,-1,1,0};
    int q[1111111][3];//0 x,1 y,2 t
    void bfs(int num)
    {
        int i,j,x,y,t,xx,yy,tt;
        int front,rear;
        front=rear=1;
        x=st[num][0];
        y=st[num][1];
        q[front][0]=x;
        q[front][1]=y;
        q[front][2]=0;
        dist[x][y][num]=0;
        vis[x][y]=1;
        while(front<=rear){ //这里先把值为num的国家都找出来,这些都是连通的
            x=q[front][0];
            y=q[front][1];
            t=q[front][2];
            front++;
            for(i=0;i<4;i++){
                xx=x+tab[i][0];
                yy=y+tab[i][1];
                if(xx>=1 && xx<=n && yy>=1 && yy<=m && s[xx][yy]-'0'==num && !vis[xx][yy]){
                    vis[xx][yy]=1;
                    dist[xx][yy][num]=0;
                    rear++;
                    q[rear][0]=xx;
                    q[rear][1]=yy;
                    q[rear][2]=0;
                }
    
            }
    
        }
        front=1;  //这里值为num的国家要再次放入队列
        while(front<=rear){
            x=q[front][0];
            y=q[front][1];
            t=q[front][2];
            front++;
            for(i=0;i<4;i++){
                xx=x+tab[i][0];
                yy=y+tab[i][1];
                if(xx>=1 && xx<=n && yy>=1 && yy<=m && s[xx][yy]!='#' && !vis[xx][yy]){
                    vis[xx][yy]=1;
                    if(s[xx][yy]=='.'){
                        dist[xx][yy][num]=t+1;
                        rear++;
                        q[rear][0]=xx;
                        q[rear][1]=yy;
                        q[rear][2]=t+1;
                    }
                    else{
                        int cot=s[xx][yy]-'0';
                        dist[xx][yy][num]=t+1;
                        ans[num][cot]=min(ans[num][cot],t+1);
                        rear++;
                        q[rear][0]=xx;
                        q[rear][1]=yy;
                        q[rear][2]=t+1;
                    }
                }
            }
        }
    }
    
    int main()
    {
        int i,j,ant;
        while(scanf("%d%d",&n,&m)!=EOF)
        {
            for(i=1;i<=n;i++){
                scanf("%s",s[i]+1);
                for(j=1;j<=m;j++){
                    if(s[i][j]=='1'){
                        st[1][0]=i;st[1][1]=j;
                    }
                    if(s[i][j]=='2'){
                        st[2][0]=i;st[2][1]=j;
                    }
                    if(s[i][j]=='3'){
                        st[3][0]=i;st[3][1]=j;
                    }
                    dist[i][j][1]=dist[i][j][2]=dist[i][j][3]=inf;
                }
    
            }
            for(i=1;i<=3;i++){
                for(j=1;j<=3;j++){
                    if(i!=j){
                        ans[i][j]=inf;
                    }
                    else ans[i][j]=0;
                }
            }
    
            for(i=1;i<=3;i++){
                memset(vis,0,sizeof(vis));
                bfs(i);
            }
            ant=inf;
            ant=min(ant,ans[1][2]+ans[1][3]-2);
            ant=min(ant,ans[2][1]+ans[2][3]-2);
            ant=min(ant,ans[3][1]+ans[3][2]-2);
            for(i=1;i<=n;i++){
                for(j=1;j<=m;j++){
                    if(s[i][j]!='#'){
                        if(s[i][j]=='.'){
                            ant=min(ant,dist[i][j][1]+dist[i][j][2]+dist[i][j][3]-2);
                        }
                        else{
                            ant=min(ant,dist[i][j][1]+dist[i][j][2]+dist[i][j][3]-2);
                        }
                    }
    
                }
            }
            if(ant>10000000)printf("-1
    ");
            else printf("%d
    ",ant);
        }
        return 0;
    }
    


  • 相关阅读:
    GitHub 如何创建 Access Token
    Fact Table 数据表什么意思
    高基数数据特性是什么意思
    Edge 浏览器的隐藏 URL QR 生成器
    Apache Druid 安装的时候进行 Java 版本校验没有输出
    Apache Druid 简介
    如何在 Discourse 中批量移动主题到不同的分类中
    素材
    Drawable转bitmap
    Drawable与 Bitmap 转换总结
  • 原文地址:https://www.cnblogs.com/herumw/p/9464627.html
Copyright © 2011-2022 走看看