zoukankan      html  css  js  c++  java
  • C++流操作之fstream

    在Windows平台对文件进行存取操作可选的方案有很多,如果采用纯C,则需要用到File*等,当然也可以直接调用Windows API来做;如果采用C++,首先想到的就是文件流fstream。虽然在COM层面上,我们还可以使用IStream来实现文件的读写,其效率也非常高。不过本文仅对C++流操作做简单的探讨,相比于Windows API或IStream,C++的流操作通用性更好一些,因为你能轻松将代码移植到其它平台上。

    fstream有两个派生类,即ifstream和ofstream,分别对应输入文件流、输出文件流。在使用它们之前,必须将它们的头文件包含到你的cpp文件中。

    创建一个文件流的方法很简单:

    ifstream fin;
    fin.open("C:filename.txt");

    这样就创建了一个输入文件流fin,它对应的文件是C盘根目录下的filename.txt。实际上,open方法还包含一个参数mode,用以指定其打开方式。

    ios::in 以读取方式打开文件
    ios::out 以写入方式打开文件
    ios::ate 存取指针在文件末尾
    ios::app 写入时采用追加方式
    ios::trunc 写入时抹去旧数据
    ios::binary 以二进制方式存取


    上面的代码并未指定任何打开方式,则采用默认参数:输入文件流即ios::in,输出文件流即ios::out。一般在需要组合特殊的mode才显式指定,比如:

    ios::in | ios::binary; //以二进制方式读取文件

    除此之外,还可以在构造时指定相应的文件路径和名称,让创建过程一步到位。上述代码可改写为:

    ifstream fin("C:filename.txt");

    与open方法相反的是close方法,它的作用与open正好相反。open是将文件流对象与外设中的文件关联起来,close则是解除二者的关联。但是需要注意的是,close还起到清空缓存的作用。最好让open方法与close方法成对出现。

    创建并打开一个文件流后,就能像操作标准I/O那样使用流插入操作符(<<)与流提取操作符(>>)。对于输入文件流来说,可以调用getline函数从文件流中读取一整行数据,这样就可以读入含有空格的字符串。

    下面是一个例子,该例的作用是读取一个STLA格式的文件。STL是一种常用快速成像文件格式,其格式非常简单,特别是ASCII版本(即STLA)。代码如下所示:

    stdafx.h

    // stdafx.h : include file for standard system include files,
    // or project specific include files that are used frequently, but
    // are changed infrequently
    //
    
    #pragma once
    
    #include "targetver.h"
    
    #include <stdio.h>
    #include <tchar.h>
    //added
    #include <iostream>
    #include <sstream>
    #include <fstream>
    #include <string>
    #include <vector>
    using namespace std;
    
    // TODO: reference additional headers your program requires here
    

    readstla.cpp

    // readstla.cpp : Defines the entry point for the console application.
    //
    
    #include "stdafx.h"
    
    struct facet {
    	float normal[3];
    	float vertex[3][3];
    };
    
    int _tmain(int argc, _TCHAR* argv[])
    {
    	if (argc < 2) {
    		printf("specify an input file!
    ");
    		return 1;
    	}
    	ifstream in(argv[1]);
    	if (!in.is_open()) {
    		printf("fail to open file!
    ");
    		return 1;
    	}
    	//var
    	vector<facet> solid;
    	string line;
    	string word;
    	//check format
    	getline(in, line);
    	if (line.find("solid") != 0) {
    		printf("wrong file format!
    ");
    		in.close();
    		return 1;
    	}
    	while (getline(in, line)) {
    		if (line.find("facet normal") != string::npos) {
    			facet f;
    			//read normal
    			stringstream ns(line);
    			ns >> word; //eat "facet"
    			ns >> word; //eat "normal"
    			ns >> f.normal[0] >> f.normal[1] >> f.normal[2];
    			//read vertices
    			getline(in, line); //"outer loop"
    			for (int i = 0; i < 3; i++) {
    				getline(in, line);
    				stringstream vs(line);
    				vs >> word; //eat "vertex"
    				vs >> f.vertex[i][0] >> f.vertex[i][1] >> f.vertex[i][2];
    			}
    			getline(in, line); //"endloop"
    			getline(in, line); //"endfacet"
    			solid.push_back(f);
    		}
    	}
    	in.close();
    	//output
    	int cnt = solid.size();
    	printf("read %d facet
    ", cnt);
    	for (int i = 0; i < cnt; i++) {
    		facet& f = solid[i];
    		printf("
    facet %d:
    normal = (%f, %f, %f)
    ", 
                           i+1, f.normal[0], f.normal[1], f.normal[2]);
    		for (int j = 0; j < 3; j++) {
    			printf("vertex[%d] = (%f, %f, %f)
    ", 
                                  j+1, f.vertex[j][0], f.vertex[j][1], f.vertex[j][2]);
    		}
    	}
    	return 0;
    }

    测试文件为:

    cube_corner.stl

    solid cube_corner
      facet normal 0.0 -1.0 0.0
    	outer loop
    	  vertex 0.0 0.0 0.0
    	  vertex 1.0 0.0 0.0
    	  vertex 0.0 0.0 1.0
    	endloop
      endfacet
      facet normal 0.0 0.0 -1.0
    	outer loop
    	  vertex 0.0 0.0 0.0
    	  vertex 0.0 1.0 0.0
    	  vertex 1.0 0.0 0.0
    	endloop
      endfacet
      facet normal 0.0 0.0 -1.0
    	outer loop
    	  vertex 0.0 0.0 0.0
    	  vertex 0.0 0.0 1.0
    	  vertex 0.0 1.0 0.0
    	endloop
      endfacet
      facet normal 0.577 0.577 0.577
    	outer loop
    	  vertex 1.0 0.0 0.0
    	  vertex 0.0 1.0 0.0
    	  vertex 0.0 0.0 1.0
    	endloop
      endfacet
    endsolid

    输入结果为:

    read 4 facet
    
    facet 1:
    normal = (0.000000, -1.000000, 0.000000)
    vertex[1] = (0.000000, 0.000000, 0.000000)
    vertex[2] = (1.000000, 0.000000, 0.000000)
    vertex[3] = (0.000000, 0.000000, 1.000000)
    
    facet 2:
    normal = (0.000000, 0.000000, -1.000000)
    vertex[1] = (0.000000, 0.000000, 0.000000)
    vertex[2] = (0.000000, 1.000000, 0.000000)
    vertex[3] = (1.000000, 0.000000, 0.000000)
    
    facet 3:
    normal = (0.000000, 0.000000, -1.000000)
    vertex[1] = (0.000000, 0.000000, 0.000000)
    vertex[2] = (0.000000, 0.000000, 1.000000)
    vertex[3] = (0.000000, 1.000000, 0.000000)
    
    facet 4:
    normal = (0.577000, 0.577000, 0.577000)
    vertex[1] = (1.000000, 0.000000, 0.000000)
    vertex[2] = (0.000000, 1.000000, 0.000000)
    vertex[3] = (0.000000, 0.000000, 1.000000)
    Press any key to continue . . .






  • 相关阅读:
    火狐优化及遇到的问题
    拷贝工程,名字不改变问题
    Ajax基础实例
    Java中检测字符串的编码格式
    innerHTML和outerHTML有什么区别
    启动Tomcat出现“Bad version number in .class file (unable to load class XXX)”解决
    MyEclipse8.6安装SVN 教程 与遇到的问题
    彻底卸载JDK的-并只依赖配置环境安装JDK(不依赖注册表)-解决Error opening registry key'softwareJavasoftJava Runti问题
    数据库下的分页代码
    WSGI
  • 原文地址:https://www.cnblogs.com/james1207/p/3324938.html
Copyright © 2011-2022 走看看