docker k8s + flannel
kubernetes 是谷歌开源的 docker 集群管理解决方案。
项目地址：
http://kubernetes.io/
测试环境：
node-1: 10.6.0.140
node-2: 10.6.0.187
node-3: 10.6.0.188
kubernetes 集群，包含 master 节点，与 node 节点。
关系图:
hostnamectl --static set-hostname hostname
10.6.0.140 - k8s-master
10.6.0.187 - k8s-node-1
10.6.0.188 - k8s-node-2
部署：
一： 首先，我们需要先安装 etcd , etcd 是k8s集群的基础组件。
分别安装 etcd
yum -y install etcd
修改配置文件，/etc/etcd/etcd.conf 需要修改如下参数：
ETCD_NAME=etcd1 ETCD_DATA_DIR="/var/lib/etcd/etcd1.etcd" ETCD_LISTEN_PEER_URLS="http://10.6.0.140:2380" ETCD_LISTEN_CLIENT_URLS="http://10.6.0.140:2379,http://127.0.0.1:2379" ETCD_INITIAL_ADVERTISE_PEER_URLS="http://10.6.0.140:2380" ETCD_INITIAL_CLUSTER="etcd1=http://10.6.0.140:2380,etcd2=http://10.6.0.187:2380,etcd3=http://10.6.0.188:2380" ETCD_INITIAL_CLUSTER_STATE="new" ETCD_INITIAL_CLUSTER_TOKEN="k8s-etcd-cluster" ETCD_ADVERTISE_CLIENT_URLS="http://10.6.0.140:2379"
其他etcd集群中： ETCD_NAME , 以及IP 需要变动
修改 etcd 启动文件 /usr/lib/systemd/system/etcd.service
sed -i 's/\"${ETCD_LISTEN_CLIENT_URLS}\"/\"${ETCD_LISTEN_CLIENT_URLS}\" --listen-client-urls=\"${ETCD_LISTEN_CLIENT_URLS}\" --advertise-client-urls=\"${ETCD_ADVERTISE_CLIENT_URLS}\" --initial-cluster-token=\"${ETCD_INITIAL_CLUSTER_TOKEN}\" --initial-cluster=\"${ETCD_INITIAL_CLUSTER}\" --initial-cluster-state=\"${ETCD_INITIAL_CLUSTER_STATE}\"/g' /usr/lib/systemd/system/etcd.service
分别启动 所有节点的 etcd 服务
systemctl enable etcd
systemctl start etcd
查看启动情况
systemctl status etcd
查看 etcd 集群状态：
etcdctl cluster-health
出现 cluster is healthy 表示成功
查看 etcd 集群成员：
etcdctl member list
二： 部署k8s 的网络 flannel
编辑 /etc/hosts 文件，配置hostname 通信
vi /etc/hosts 添加:
10.6.0.140 k8s-master
10.6.0.187 k8s-node-1
10.6.0.188 k8s-node-2
安装 flannel 。
yum -y install flannel
清除网络中遗留的docker 网络 (docker0, flannel0 等)
ifconfig
如果存在 请删除之，以免发生不必要的未知错误
ip link delete docker0
....
设置 flannel 所用到的IP段
etcdctl --endpoint http://10.6.0.140:2379 set /flannel/network/config '{"Network":"10.10.0.0/16","SubnetLen":25,"Backend":{"Type":"vxlan","VNI":1}}'
接下来修改 flannel 配置文件
vim /etc/sysconfig/flanneld
FLANNEL_ETCD="http://10.6.0.140:2379,http://10.6.0.187:2379,http://10.6.0.188:2379" # 修改为 集群地址 FLANNEL_ETCD_KEY="/flannel/network/config" # 修改为 上面导入配置中的 /flannel/network FLANNEL_OPTIONS="--iface=em1" # 修改为 本机物理网卡的名称
启动 flannel
systemctl enable flanneld
systemctl start flanneld
下面还需要修改 docker 的启动文件 /usr/lib/systemd/system/docker.service
在 ExecStart 参数 dockerd 后面增加
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
重新读取配置，启动 docker
systemctl daemon-reload
systemctl start docker
查看网络接管
ifconfig
可以看到 docker0 与 flannel.1 已经在我们设置的IP段内了，表示已经成功
三、安装k8s
安装k8s 首先是 Master 端安装
下载朋友的 rpm 包
http://upyun.mritd.me/kubernetes/kubernetes-1.3.8-1.x86_64.rpm
rpm -ivh kubernetes-1.3.8-1.x86_64.rpm
由于 google 被墙 国内已经有人将镜像上传至 docker hub 里面了 我们直接下载: docker pull chasontang/kube-proxy-amd64:v1.4.0 docker pull chasontang/kube-discovery-amd64:1.0 docker pull chasontang/kubedns-amd64:1.7 docker pull chasontang/kube-scheduler-amd64:v1.4.0 docker pull chasontang/kube-controller-manager-amd64:v1.4.0 docker pull chasontang/kube-apiserver-amd64:v1.4.0 docker pull chasontang/etcd-amd64:2.2.5 docker pull chasontang/kube-dnsmasq-amd64:1.3 docker pull chasontang/exechealthz-amd64:1.1 docker pull chasontang/pause-amd64:3.0 下载以后使用 docker tag 命令将其做别名改为 gcr.io/google_containers docker tag chasontang/kube-proxy-amd64:v1.4.0 gcr.io/google_containers/kube-proxy-amd64:v1.4.0 docker tag chasontang/kube-discovery-amd64:1.0 gcr.io/google_containers/kube-discovery-amd64:1.0 docker tag chasontang/kubedns-amd64:1.7 gcr.io/google_containers/kubedns-amd64:1.7 docker tag chasontang/kube-scheduler-amd64:v1.4.0 gcr.io/google_containers/kube-scheduler-amd64:v1.4.0 docker tag chasontang/kube-controller-manager-amd64:v1.4.0 gcr.io/google_containers/kube-controller-manager-amd64:v1.4.0 docker tag chasontang/kube-apiserver-amd64:v1.4.0 gcr.io/google_containers/kube-apiserver-amd64:v1.4.0 docker tag chasontang/etcd-amd64:2.2.5 gcr.io/google_containers/etcd-amd64:2.2.5 docker tag chasontang/kube-dnsmasq-amd64:1.3 gcr.io/google_containers/kube-dnsmasq-amd64:1.3 docker tag chasontang/exechealthz-amd64:1.1 gcr.io/google_containers/exechealthz-amd64:1.1 docker tag chasontang/pause-amd64:3.0 gcr.io/google_containers/pause-amd64:3.0 清楚原来下载的镜像 docker rmi chasontang/kube-proxy-amd64:v1.4.0 docker rmi chasontang/kube-discovery-amd64:1.0 docker rmi chasontang/kubedns-amd64:1.7 docker rmi chasontang/kube-scheduler-amd64:v1.4.0 docker rmi chasontang/kube-controller-manager-amd64:v1.4.0 docker rmi chasontang/kube-apiserver-amd64:v1.4.0 docker rmi chasontang/etcd-amd64:2.2.5 docker rmi chasontang/kube-dnsmasq-amd64:1.3 docker rmi chasontang/exechealthz-amd64:1.1 docker rmi chasontang/pause-amd64:3.0
安装完 kubernetes 以后
配置 apiserver
编辑配置文件
vim /etc/kubernetes/apiserver
### # kubernetes system config # # The following values are used to configure the kube-apiserver # # The address on the local server to listen to. KUBE_API_ADDRESS="--insecure-bind-address=10.6.0.140" # The port on the local server to listen on. KUBE_API_PORT="--port=8080" # Port minions listen on KUBELET_PORT="--kubelet-port=10250" # Comma separated list of nodes in the etcd cluster KUBE_ETCD_SERVERS="--etcd-servers=http://10.6.0.140:2379,http://10.6.0.187:2379,http://10.6.0.188:2379" # Address range to use for services KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16" # default admission control policies KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota" # Add your own! KUBE_API_ARGS=""
配置完毕以后 启动 所有服务
systemctl start kube-apiserver
systemctl start kube-controller-manager
systemctl start kube-scheduler
systemctl enable kube-apiserver
systemctl enable kube-controller-manager
systemctl enable kube-scheduler
systemctl status kube-apiserver
systemctl status kube-controller-manager
systemctl status kube-scheduler
下面 node 端安装
wget http://upyun.mritd.me/kubernetes/kubernetes-1.3.8-1.x86_64.rpm
rpm -ivh kubernetes-1.3.8-1.x86_64.rpm
配置 kubelet
编辑配置文件
vim /etc/kubernetes/kubelet
### # kubernetes kubelet (minion) config # The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces) KUBELET_ADDRESS="--address=10.6.0.187" # The port for the info server to serve on KUBELET_PORT="--port=10250" # You may leave this blank to use the actual hostname KUBELET_HOSTNAME="--hostname-override=k8s-node-1" # location of the api-server KUBELET_API_SERVER="--api-servers=http://10.6.0.140:8080" # Add your own! KUBELET_ARGS="--pod-infra-container-image=docker.io/kubernetes/pause:latest"
注： KUBELET_HOSTNAME 这个配置中 配置的为 hostname 名称，主要用于区分 node 在集群中的显示
名称 必须能 ping 通，所以前面在 /etc/hosts 中要做配置
下面修改 kubernetes 的 config 文件
vim /etc/kubernetes/config
### # kubernetes system config # # The following values are used to configure various aspects of all # kubernetes services, including # # kube-apiserver.service # kube-controller-manager.service # kube-scheduler.service # kubelet.service # kube-proxy.service # logging to stderr means we get it in the systemd journal KUBE_LOGTOSTDERR="--logtostderr=true" # journal message level, 0 is debug KUBE_LOG_LEVEL="--v=0" # Should this cluster be allowed to run privileged docker containers KUBE_ALLOW_PRIV="--allow-privileged=false" # How the controller-manager, scheduler, and proxy find the apiserver KUBE_MASTER="--master=http://10.6.0.140:8080"
最后 启动 所有服务
systemctl start kubelet
systemctl start kube-proxy
systemctl enable kubelet
systemctl enable kube-proxy
systemctl status kubelet
systemctl status kube-proxy
master 中 测试 是否 node 已经正常
[root@k8s-master ~]#kubectl --server="http://10.6.0.140:8080" get node NAME STATUS AGE k8s-master NotReady 50m k8s-node-1 Ready 1m k8s-node-2 Ready 57s
四、双向 TLS 认证配置
kubernetes 提供了多种安全认证机制 Token 或用户名密码的单向 tls 认证, 基于 CA 证书 双向 tls 认证。
1. master 中 创建 openssl ca 证书
mkdir /etc/kubernetes/cert
必须授权
chown kube:kube -R /etc/kubernetes/cert
cd /etc/kubernetes/cert
生成私钥
openssl genrsa -out k8sca-key.pem 2048 openssl req -x509 -new -nodes -key k8sca-key.pem -days 10000 -out k8sca.pem -subj "/CN=kube-ca"
配置 apiserver 证书
复制openssl 的配置文件到cert目录中
cp /etc/pki/tls/openssl.cnf .
编辑 配置文件，支持IP认证
vim openssl.cnf
在 distinguished_name 上面添加 req_extensions = v3_req [ req ] ..... req_extensions = v3_req distinguished_name = req_distinguished_name ..... 在 [ v3_req ] 下面添加 subjectAltName = @alt_names [ v3_req ] basicConstraints = CA:FALSE keyUsage = nonRepudiation, digitalSignature, keyEncipherment subjectAltName = @alt_names 添加 如下所有内容： [ alt_names ] DNS.1 = kubernetes DNS.2 = kubernetes.default DNS.3 = kubernetes.default.svc DNS.4 = kubernetes.default.svc.cluster.local IP.1 = ${K8S_SERVICE_IP} # kubernetes server ip IP.2 = ${MASTER_HOST} # master ip(如果都在一台机器上写一个就行)
然后开始签署 apiserver 相关的证书
openssl genrsa -out apiserver-key.pem 2048 openssl req -new -key apiserver-key.pem -out apiserver.csr -subj "/CN=kube-apiserver" -config openssl.cnf openssl x509 -req -in apiserver.csr -CA k8sca.pem -CAkey k8sca-key.pem -CAcreateserial -out apiserver.pem -days 365 -extensions v3_req -extfile openssl.cnf
下面 生成 每个 node 的证书, 在 master 中生成，然后复制到各 node 中
apiserver 证书签署完成后还需要签署每个节点 node 的证书
cp openssl.cnf worker-openssl.cnf
编辑配置文件:
vim worker-openssl.cnf
主要修改如下[ alt_names ]内容 , 有多少个node 就写多少个IP配置： [ alt_names ] IP.1 = 10.6.0.187 IP.2 = 10.6.0.188
生成 k8s-node-1 私钥 openssl genrsa -out k8s-node-1-worker-key.pem 2048 openssl req -new -key k8s-node-1-worker-key.pem -out k8s-node-1-worker.csr -subj "/CN=k8s-node-1" -config worker-openssl.cnf openssl x509 -req -in k8s-node-1-worker.csr -CA k8sca.pem -CAkey k8sca-key.pem -CAcreateserial -out k8s-node-1-worker.pem -days 365 -extensions v3_req -extfile worker-openssl.cnf 生成 k8s-node-2 私钥 openssl genrsa -out k8s-node-2-worker-key.pem 2048 openssl req -new -key k8s-node-2-worker-key.pem -out k8s-node-2-worker.csr -subj "/CN=k8s-node-2" -config worker-openssl.cnf openssl x509 -req -in k8s-node-2-worker.csr -CA k8sca.pem -CAkey k8sca-key.pem -CAcreateserial -out k8s-node-2-worker.pem -days 365 -extensions v3_req -extfile worker-openssl.cnf 所有 node 生成以后， 还需要生成集群管理证书 openssl genrsa -out admin-key.pem 2048 openssl req -new -key admin-key.pem -out admin.csr -subj "/CN=kube-admin" openssl x509 -req -in admin.csr -CA k8sca.pem -CAkey k8sca-key.pem -CAcreateserial -out admin.pem -days 365
配置 master
编辑 master apiserver 配置文件
vim /etc/kubernetes/apiserver
### # kubernetes system config # # The following values are used to configure the kube-apiserver # # The address on the local server to listen to. KUBE_API_ADDRESS="--insecure-bind-address=10.6.0.140 --insecure-bind-address=127.0.0.1" # The port on the local server to listen on. KUBE_API_PORT="--secure-port=6443 --insecure-port=8080" # Port minions listen on KUBELET_PORT="--kubelet-port=10250" # Comma separated list of nodes in the etcd cluster KUBE_ETCD_SERVERS="--etcd-servers=http://10.6.0.140:2379,http://10.6.0.187:2379,http://10.6.0.188:2379" # Address range to use for services KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16" # default admission control policies KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota" # Add your own! KUBE_API_ARGS="--tls-cert-file=/etc/kubernetes/cert/apiserver.pem --tls-private-key-file=/etc/kubernetes/cert/apiserver-key.pem --client-ca-file=/etc/kubernetes/cert/k8sca.pem --service-account-key-file=/etc/kubernetes/cert/apiserver-key.pem"
接着编辑 controller manager 的配置
vim /etc/kubernetes/controller-manager
### # The following values are used to configure the kubernetes controller-manager # defaults from config and apiserver should be adequate # Add your own! KUBE_CONTROLLER_MANAGER_ARGS="--service-account-private-key-file=/etc/kubernetes/cert/apiserver-key.pem --root-ca-file=/etc/kubernetes/cert/k8sca.pem --master=http://127.0.0.1:8080"
接着 重启 所有服务
systemctl restart kube-apiserver
systemctl restart kube-controller-manager
systemctl restart kube-scheduler
systemctl status kube-apiserver
systemctl status kube-controller-manager
systemctl status kube-scheduler
配置 node 节点
先 copy 配置文件 到 node 节点
k8s-node-1 节点：
mkdir /etc/kubernetes/cert/
必须授权
chown kube:kube -R /etc/kubernetes/cert
拷贝如下三个文件到 /etc/kubernetes/cert/ 目录下
k8s-node-1-worker-key.pem
k8s-node-1-worker.pem
k8sca.pem
k8s-node-2 节点：
mkdir /etc/kubernetes/cert/
必须授权
chown kube:kube -R /etc/kubernetes/cert
拷贝如下三个文件到 /etc/kubernetes/cert/ 目录下
k8s-node-2-worker-key.pem
k8s-node-2-worker.pem
k8sca.pem
如下配置 所有 node 节点都需要配置
修改 kubelet 配置
vim /etc/kubernetes/kubelet
### # kubernetes kubelet (minion) config # The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces) KUBELET_ADDRESS="--address=10.6.0.188" # The port for the info server to serve on KUBELET_PORT="--port=10250" # You may leave this blank to use the actual hostname KUBELET_HOSTNAME="--hostname-override=k8s-node-2" # location of the api-server KUBELET_API_SERVER="--api-servers=https://10.6.0.140:6443" # Add your own! KUBELET_ARGS="--tls-cert-file=/etc/kubernetes/cert/k8s-node-1-worker.pem --tls-private-key-file=/etc/kubernetes/cert/k8s-node-1-worker-key.pem --kubeconfig=/etc/kubernetes/worker-kubeconfig.yaml --pod-infra-container-image=docker.io/kubernetes/pause:latest"
修改 config 配置
vim /etc/kubernetes/config
### # kubernetes system config # # The following values are used to configure various aspects of all # kubernetes services, including # # kube-apiserver.service # kube-controller-manager.service # kube-scheduler.service # kubelet.service # kube-proxy.service # logging to stderr means we get it in the systemd journal KUBE_LOGTOSTDERR="--logtostderr=true" # journal message level, 0 is debug KUBE_LOG_LEVEL="--v=0" # Should this cluster be allowed to run privileged docker containers KUBE_ALLOW_PRIV="--allow-privileged=false" # How the controller-manager, scheduler, and proxy find the apiserver KUBE_MASTER="--master=https://10.6.0.140:6443"
创建 kube-proxy 配置文件
vim /etc/kubernetes/worker-kubeconfig.yaml
# 内容如下
apiVersion: v1 kind: Config clusters: - name: local cluster: certificate-authority: /etc/kubernetes/cert/k8sca.pem users: - name: kubelet user: client-certificate: /etc/kubernetes/cert/k8s-node-1-worker.pem client-key: /etc/kubernetes/cert/k8s-node-1-worker-key.pem contexts: - context: cluster: local user: kubelet name: kubelet-context current-context: kubelet-context
配置 kube-proxy 使其使用证书
vim /etc/kubernetes/proxy
### # kubernetes proxy config # default config should be adequate # Add your own! KUBE_PROXY_ARGS="--master=https://10.6.0.140:6443 --kubeconfig=/etc/kubernetes/worker-kubeconfig.yaml"
重启动并测试
systemctl restart kubelet
systemctl restart kube-proxy
systemctl status kubelet
systemctl status kube-proxy
至此，整个集群已经搭建完成，剩下的就是pod 的测试