win7 远程桌面连接centos 6.5

首先安装tigervnc-server:

yum install tigervnc-server

 

安装好后，设置 vi /etc/sysconfig/vncservers

[root@gateway-001 ~]# cat /etc/sysconfig/vncservers 
# The VNCSERVERS variable is a list of display:user pairs.
#
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own).  You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.  
#
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted!  For a secure way of using VNC, see this URL:
# https://access.redhat.com/knowledge/solutions/7027

# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.

# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel.  See the "-via" option in the
# `man vncviewer' manual page.

VNCSERVERS="1:root"
VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -localhost"
VNCSERVERS="2:work"
VNCSERVERARGS[2]="-geometry 1024x768  -nolisten tcp -localhost"

 

启动vncserver服务器：

[root@gateway-001 ~]# service vncserver start

切换到work用户，设置vncpasswd

在服务器上可以看到打开的vnc端口：

 

在windows上安装viewvnc，输入ip地址和端口号进行连接：

 

输入密码：

可以看到成功的连接上了centos 6.5的桌面：

/etc/sysconfig/iptables

# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 6000:6010 -j ACCEPT
-A INPUT -m state --state NEW -m udp -p udp --dport 177 -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited



COMMIT

关闭防火墙： /etc/init.d/iptables stop 使用root账号