使用Arduino开发板连接HX711称重传感器模块制作数字体重秤

使用Arduino开发板连接HX711称重传感器模块制作数字体重秤 [复制链接]

https://item.taobao.com/item.htm?spm=a1z09.2.0.0.4c992e8deJNp96&id=575012000301&_u=i1qf7bf58a90

https://www.yiboard.com/thread-1241-1-1.html

、

 

称重传感器校准

要使用称重传感器，首先需要校准它。为此，请在Arduino开发板上上传以下代码。等到读取消息显示在串行监视器上，然后在称重传感器上放置指定的重量物体。使用A键，您可以将calibration_factor增加一个单位，您可以使用Z键减小它以获得正确的重量。

代码

本篇文章的代码使用的是HX711库：

/**
 *
 * HX711 library for Arduino - example file
 * https://github.com/bogde/HX711
 *
 * MIT License
 * (c) 2018 Bogdan Necula
 *
**/
#include "HX711.h"


// HX711 circuit wiring
const int LOADCELL_DOUT_PIN = 4;
const int LOADCELL_SCK_PIN = 5;


HX711 scale;

void setup() {
  Serial.begin(38400);
  Serial.println("HX711 Demo");

  Serial.println("Initializing the scale");

  // Initialize library with data output pin, clock input pin and gain factor.
  // Channel selection is made by passing the appropriate gain:
  // - With a gain factor of 64 or 128, channel A is selected
  // - With a gain factor of 32, channel B is selected
  // By omitting the gain factor parameter, the library
  // default "128" (Channel A) is used here.
  scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);

  Serial.println("Before setting up the scale:");
  Serial.print("read: 		");
  Serial.println(scale.read());			// print a raw reading from the ADC

  Serial.print("read average: 		");
  Serial.println(scale.read_average(20));  	// print the average of 20 readings from the ADC

  Serial.print("get value: 		");
  Serial.println(scale.get_value(5));		// print the average of 5 readings from the ADC minus the tare weight (not set yet)

  Serial.print("get units: 		");
  Serial.println(scale.get_units(5), 1);	// print the average of 5 readings from the ADC minus tare weight (not set) divided
						// by the SCALE parameter (not set yet)

  scale.set_scale(2280.f);                      // this value is obtained by calibrating the scale with known weights; see the README for details
  scale.tare();				        // reset the scale to 0

  Serial.println("After setting up the scale:");

  Serial.print("read: 		");
  Serial.println(scale.read());                 // print a raw reading from the ADC

  Serial.print("read average: 		");
  Serial.println(scale.read_average(20));       // print the average of 20 readings from the ADC

  Serial.print("get value: 		");
  Serial.println(scale.get_value(5));		// print the average of 5 readings from the ADC minus the tare weight, set with tare()

  Serial.print("get units: 		");
  Serial.println(scale.get_units(5), 1);        // print the average of 5 readings from the ADC minus tare weight, divided
						// by the SCALE parameter set with set_scale

  Serial.println("Readings:");
}

void loop() {
  Serial.print("one reading:	");
  Serial.print(scale.get_units(), 1);
  Serial.print("	| average:	");
  Serial.println(scale.get_units(10), 1);

 // scale.power_down();			        // put the ADC in sleep mode
  delay(20);
 // scale.power_up();
}