zoukankan      html  css  js  c++  java
  • CubieTruck翻坑实录

     1、选好img
    暂时发现ct-lubuntu-nand-v2.0这个版本最稳定,是安装在板载的nand里面的
    地址:http://dl.cubieboard.org/software/a20-cubietruck/lubuntu/ct-lubuntu-nand-v2.0/server/
    2、更改显示输出为VGA
    系统默认输出是HDMI,如需更改为VGA,参考以下步骤
    (1)挂载nanda 
    #mount /dev/nanda /mnt 
    (2)将script.bin文件转换为fex

    # cd /mnt 

    # bin2fex script.bin script.fex  
    #vi script.fex 
    (3)更改显示输出,保存文件
    将screen0_output_type = 3改成4(4就是VGA)
    (4)保存重启
    #fex2bin script.fex script.bin

    #sync //把内存中的修改写入磁盘中 

    #reboot
    3、无线网卡问题
    在修改/etc/modules文件,在新一行中加入bcmdhd(即增加无线网卡的开机加载)
    4、拔掉网线导致无线网卡无法使用
    将/etc/network/interfaces文件里无线和有线配置的位置交换,让无线的配置放在前面
    以下是文件内容 

    auto wlan0
    iface wlan0 inet dhcp
    pre-up ip link set wlan0 up
    pre-up iwconfig wlan0 essid your-ssid
    wpa-ssid your-ssid
    wpa-psk your-psk

    auto lo eth0
    iface lo inet loopback
    iface eth0 inet dhcp 
  • 相关阅读:
    SPI简述
    stm32和sd卡
    BKP和RTC
    Lwip与底层的接口
    关于Ad-hoc
    stm32 引脚映射 和 ADC
    GDB使用总结
    linux管道和重定向
    学习python的第四天
    学习pyton的第三天
  • 原文地址:https://www.cnblogs.com/lingcoln/p/4523913.html
Copyright © 2011-2022 走看看