zoukankan      html  css  js  c++  java
  • linux 使用ifstat查看网络使用情况

    首先安装ifstat

    wget http://distfiles.macports.org/ifstat/ifstat-1.1.tar.gz
    tar xzvf ifstat-1.1.tar.gz
    cd ifstat-1.1
    ./configure
    make
    sudo make install

    然后查看

    #ifstat
      eth0       
     KB/s in  KB/s out
       12.64   1481.41
        0.00      0.00
       10.91   1459.28
        0.00      0.00
       15.71   1300.80
        0.00      0.00
       13.89   1615.13
        0.00      0.00
        9.53    696.94
        0.00      0.00
       12.72   1200.90

    默认ifstat不监控回环接口,显示的流量单位是KB。

    如果查看所有端口:

    ifstat -a
            lo                 eth0                eth1       
     KB/s in  KB/s out   KB/s in  KB/s out   KB/s in  KB/s out
        0.08      0.08      0.00      0.00      0.00      0.00
        0.18      0.18     18.25   1286.86      0.00      0.00
        0.07      0.07      0.00      0.00      0.00      0.00
        0.07      0.07     17.33   1124.82      0.00      0.00
        0.07      0.07      0.00      0.00      0.00      0.00
        0.07      0.07     21.65   1149.00      0.00      0.00
        0.07      0.07      0.00      0.00      0.00      0.00
        0.17      0.17     19.84   1138.90      0.00      0.00
        0.25      0.25      0.00      0.00      0.00      0.00
        0.07      0.07     19.27   1630.61      0.00      0.00
        0.07      0.07      0.00      0.00      0.00      0.00
  • 相关阅读:
    JS函数式编程【译】前言
    11.15周总结
    11.13
    11.12
    11.11
    11.10
    11.9
    11.8周总结
    11.6
    11.5
  • 原文地址:https://www.cnblogs.com/liqiu/p/4497540.html
Copyright © 2011-2022 走看看