zoukankan      html  css  js  c++  java
  • 微软Azure云平台Hbase 的使用

    In this article

    What is HBase?

    HBase is a low-latency NoSQL database that allows online transactional processing of big data. HBase is offered as a managed cluster integrated into the Azure environment. The clusters are configured to store data directly in Azure Blob storage, which provides low latency and increased elasticity in performance/cost choices. This enables customers to build interactive websites that work with large datasets, to build services that store sensor and telemetry data from millions of end points, and to analyze this data with Hadoop jobs. For more information on HBase and the scenarios it can be used for, see HDInsight HBase overview.

    Prerequisites

    Before you begin this tutorial, you must have the following:

    Provision an HBase cluster on the Azure portal

    This section describes how to provision an HBase cluster using the Azure Management portal.

    To provision an HDInsight cluster in the Azure Management portal

    1. Sign in to the Azure Management Portal.
    2. Click NEW on the lower left, and then click DATA SERVICES, HDINSIGHT, HBASE.
    3. Enter CLUSTER NAME, CLUSTER SIZE, CLUSTER USER PASSWORD, and STORAGE ACCOUNT.

      Choosing and HBase cluster type and entering cluster login credentials.

    4. Click on the check icon on the lower left to create the HBase cluster.

    Create an HBase sample table from the HBase shell

    This section describes how to enable and use the Remote Desktop Protocol (RDP) to access the HBase shell and then use it to create an HBase sample table, add rows, and then list the rows in the table.

    It assumes you have completed the procedure outlined in the first section, and so have already successfully created an HBase cluster.

    To enable the RDP connection to the HBase cluster

    1. From the Management portal, click HDINSIGHT from the left to view the list of the existing clusters.
    2. Click the HBase cluster where you want to open HBase Shell.
    3. Click CONFIGURATION from the top.
    4. Click ENABLE REMOTE from the bottom.
    5. Enter the RDP user name and password. The user name must be different from the cluster user name you used when provisioning the cluster. TheEXPIRES ON data can be up to seven days from today.
    6. Click the check on the lower right to enable remote desktop.
    7. After the RPD is enabled, click CONNECT from the bottom of the CONFIGURATION tab, and follow the instructions.

    To open the HBase Shell

    1. Within your RDP session, click on the Hadoop Command Line shortcut located on the desktop.

    2. Change the folder to the HBase home directory:

      cd %HBASE_HOME%in
    3. Open the HBase shell:

      hbase shell

    To create a sample table, add data and retrieve the data

    1. Create a sample table:

      create 'sampletable', 'cf1'
    2. Add a row to the sample table:

      put 'sampletable', 'row1', 'cf1:col1', 'value1'
    3. List the rows in the sample table:

      scan 'sampletable'

    Check cluster status in the HBase WebUI

    HBase also ships with a WebUI that helps monitoring your cluster, for example by providing request statistics or information about regions. On the HBase cluster you can find the WebUI under the address of the zookeepernode.

    http://zookeepernode:60010/master-status

    In a HighAvailability (HA) cluster, you will find a link to the current active HBase master node hosting the WebUI.

    Bulk load a sample table

    1. Create samplefile1.txt containing the following data, and upload to Azure Blob Storage to /tmp/samplefile1.txt:

      row1    c1  c2
      row2    c1  c2
      row3    c1  c2
      row4    c1  c2
      row5    c1  c2
      row6    c1  c2
      row7    c1  c2
      row8    c1  c2
      row9    c1  c2
      row10    c1 c2
    2. Change the folder to the HBase home directory:

      cd %HBASE_HOME%in
    3. Execute ImportTsv:

      hbase org.apache.hadoop.hbase.mapreduce.ImportTsv -Dimporttsv.columns="HBASE_ROW_KEY,a:b,a:c" -Dimporttsv.bulk.output=/tmpOutput sampletable2 /tmp/samplefile1.txt
    4. Load the output from prior command into HBase:

      hbase org.apache.hadoop.hbase.mapreduce.LoadIncrementalHFiles /tmpOutput sampletable2

    Use Hive to query an HBase table

    Now you have an HBase cluster provisioned and have created an HBase table, you can query it using Hive. This section creates a Hive table that maps to the HBase table and uses it to queries the data in your HBase table.

    To open cluster dashboard

    1. Sign in to the Azure Management Portal.
    2. Click HDINSIGHT from the left pane. You shall see a list of clusters created including the one you just created in the last section.
    3. Click the cluster name where you want to run the Hive job.
    4. Click QUERY CONSOLE from the bottom of the page to open cluster dashboard. It opens a Web page on a different browser tab.
    5. Enter the Hadoop User account username and password. The default username is admin, the password is what you entered during the provision process. A new browser tab is opened.
    6. Click Hive Editor from the top. The Hive Editor looks like :

      HDInsight cluster dashboard.

    To run Hive queries

    1. Enter the HiveQL script below into Hive Editor and click SUBMIT to create an Hive Table mapping to the HBase table. Make sure that you have created the sampletable table referenced here in HBase using the HBase Shell before executing this statement.

      CREATE EXTERNAL TABLE hbasesampletable(rowkey STRING, col1 STRING, col2 STRING)
      STORED BY 'org.apache.hadoop.hive.hbase.HBaseStorageHandler'
      WITH SERDEPROPERTIES ('hbase.columns.mapping' = ':key,cf1:col1,cf1:col2')
      TBLPROPERTIES ('hbase.table.name' = 'sampletable');

      Wait until the Status is updated to Completed.

    2. Enter the HiveQL script below into Hive Editor, and then click SUBMIT button. The Hive query queries the data in the HBase table:

      SELECT count(*) FROM hbasesampletable;
    3. To retrieve the results of the Hive query, click on the View Details link in the Job Session window when the job finishes executing. The Job Output shall be 1 because you only put one record into the HBase table.

    To browse the output file

    1. From Query Console, click File Browser from the top.
    2. Click the Azure Storage account used as the default file system for the HBase cluster.
    3. Click the HBase cluster name. The default Azure storage account container uses the cluster name.
    4. Click user.
    5. Click admin. This is the Hadoop user name.
    6. Click the job name with the Last Modified time matching the time when the SELECT Hive query ran.
    7. Click stdout. Save the file and open the file with Notepad. The output shall be 1.

      HDInsight HBase Hive Editor File Browser

    Use HBase REST Client Library for .NET C# APIs to create an HBase table and retrieve data from the table

    The Microsoft HBase REST Client Library for .NET project must be downloaded from GitHub and the project built to use the HBase .NET SDK. The following procedure includes the instructions for this task.

    1. Create a new C# Visual Studio Windows Desktop Console application.
    2. Open NuGet Package Manager Console by click the TOOLS menu, NuGet Package Manager, Package Manager Console.
    3. Run the following NuGet command in the console:

      Install-Package Microsoft.HBase.Client

    4. Add the following using statements on the top of the file:

      using Microsoft.HBase.Client;
      using org.apache.hadoop.hbase.rest.protobuf.generated;
    5. Replace the Main function with the following:

      static void Main(string[] args)
      {
          string clusterURL = "https://<yourHBaseClusterName>.azurehdinsight.net";
          string hadoopUsername= "<yourHadoopUsername>";
          string hadoopUserPassword = "<yourHadoopUserPassword>";
      
          string hbaseTableName = "sampleHbaseTable";
      
          // Create a new instance of an HBase client.
          ClusterCredentials creds = new ClusterCredentials(new Uri(clusterURL), hadoopUsername, hadoopUserPassword);
          HBaseClient hbaseClient = new HBaseClient(creds);
      
          // Retrieve the cluster version
          var version = hbaseClient.GetVersion();
          Console.WriteLine("The HBase cluster version is " + version);
      
          // Create a new HBase table.
          TableSchema testTableSchema = new TableSchema();
          testTableSchema.name = hbaseTableName;
          testTableSchema.columns.Add(new ColumnSchema() { name = "d" });
          testTableSchema.columns.Add(new ColumnSchema() { name = "f" });
          hbaseClient.CreateTable(testTableSchema);
      
          // Insert data into the HBase table.
          string testKey = "content";
          string testValue = "the force is strong in this column";
          CellSet cellSet = new CellSet();
          CellSet.Row cellSetRow = new CellSet.Row { key = Encoding.UTF8.GetBytes(testKey) };
          cellSet.rows.Add(cellSetRow);
      
          Cell value = new Cell { column = Encoding.UTF8.GetBytes("d:starwars"), data = Encoding.UTF8.GetBytes(testValue) };
          cellSetRow.values.Add(value);
          hbaseClient.StoreCells(hbaseTableName, cellSet);
      
          // Retrieve a cell by its key.
          cellSet = hbaseClient.GetCells(hbaseTableName, testKey);
          Console.WriteLine("The data with the key '" + testKey + "' is: " + Encoding.UTF8.GetString(cellSet.rows[0].values[0].data));
          // with the previous insert, it should yield: "the force is strong in this column"
      
          //Scan over rows in a table. Assume the table has integer keys and you want data between keys 25 and 35. 
          Scanner scanSettings = new Scanner()
          {
              batch = 10,
              startRow = BitConverter.GetBytes(25),
              endRow = BitConverter.GetBytes(35)
          };
      
          ScannerInformation scannerInfo = hbaseClient.CreateScanner(hbaseTableName, scanSettings);
          CellSet next = null;
          Console.WriteLine("Scan results");
      
          while ((next = hbaseClient.ScannerGetNext(scannerInfo)) != null)
          {
              foreach (CellSet.Row row in next.rows)
              {
                  Console.WriteLine(row.key + " : " + Encoding.UTF8.GetString(row.values[0].data));
              }
          }
      
          Console.WriteLine("Press ENTER to continue ...");
          Console.ReadLine();
      }
    6. Set the first three variables in the Main function.

    7. Press F5 to run the application.

    What's Next?

    In this tutorial, you have learned how to provision an HBase cluster, how to create tables, and and view the data in those tables from the HBase shell. You also learned how use Hive to query the data in HBase tables and how to use the HBase C# APIs to create an HBase table and retrieve data from the table.

    To learn more, see:

  • 相关阅读:
    核心编程(第七章)
    核心编程答案(第六章)
    spring aop配置切点执行了两次的原因
    spring AOP使用 xml配置
    有关于时间戳的pgsql操作
    sql 中 limit 与 limit,offset连用
    学习大数据笔记day1
    Java实现各种排序
    关于java洗牌发牌小程序
    flex.css
  • 原文地址:https://www.cnblogs.com/pangguoming/p/4231496.html
Copyright © 2011-2022 走看看