一.查看当前环境： # grid用户 检查scan-ip地址的配置 [grid@node1 ~]$ srvctl config scan SCAN name: scan-cluster.com, Network: 1/192.168.0.0/255.255.255.0/eth0 SCAN VIP name: scan1, IP: /scan-cluster/192.168.0.24 SCAN VIP name: scan2, IP: /scan-cluster/192.168.0.25 SCAN VIP name: scan3, IP: /scan-cluster/192.168.0.26 [grid@node1 ~]$ 检查scan-ip地址的实际分布及状态 [grid@node1 ~]$ srvctl status scan SCAN VIP scan1 is enabled SCAN VIP scan1 is running on node node2 SCAN VIP scan2 is enabled SCAN VIP scan2 is running on node node1 SCAN VIP scan3 is enabled SCAN VIP scan3 is running on node node1 [grid@node1 ~]$ 检查scan监听配置 [grid@node1 ~]$ srvctl config scan_listener SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521 SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521 SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521 [grid@node1 ~]$ 检查scan监听状态 [grid@node1 ~]$ srvctl status scan_listener SCAN Listener LISTENER_SCAN1 is enabled SCAN listener LISTENER_SCAN1 is running on node node2 SCAN Listener LISTENER_SCAN2 is enabled SCAN listener LISTENER_SCAN2 is running on node node1 SCAN Listener LISTENER_SCAN3 is enabled SCAN listener LISTENER_SCAN3 is running on node node1 [grid@node1 ~]$ 二.修改SCAN IP #停掉scan监听 [grid@node2 ~]$ srvctl stop scan_listener [grid@node2 ~]$ srvctl status scan_listener SCAN Listener LISTENER_SCAN1 is enabled SCAN listener LISTENER_SCAN1 is not running SCAN Listener LISTENER_SCAN2 is enabled SCAN listener LISTENER_SCAN2 is not running SCAN Listener LISTENER_SCAN3 is enabled SCAN listener LISTENER_SCAN3 is not running #停掉scan应用 [grid@node2 ~]$ srvctl stop scan [grid@node2 ~]$ srvctl status scan SCAN VIP scan1 is enabled SCAN VIP scan1 is not running SCAN VIP scan2 is enabled SCAN VIP scan2 is not running SCAN VIP scan3 is enabled SCAN VIP scan3 is not running [grid@node2 ~]$ 三.修改DNS中的IP配置（略） 四.重新注册SACN #查看SCAN name [grid@node2 ~]$ srvctl config scan SCAN name: scan-cluster, Network: 1/192.168.0.0/255.255.255.0/eth0 SCAN VIP name: scan1, IP: /scan-cluster/192.168.0.25 SCAN VIP name: scan2, IP: /scan-cluster/192.168.0.26 SCAN VIP name: scan3, IP: /scan-cluster/192.168.0.24 #使用root用户 [grid@node2 ~]$ [root@node2 ~]# /u01/app/11.2.0/grid/bin/srvctl modify scan -n scan-cluster 五.检查SCAN # grid用户 检查scan-ip地址的配置 [grid@node1 ~]$ srvctl config scan 检查scan-ip地址的实际分布及状态 [grid@node1 ~]$ srvctl status scan 检查scan监听配置 [grid@node1 ~]$ srvctl config scan_listener 检查scan监听状态 [grid@node1 ~]$ srvctl status scan_listener