zoukankan      html  css  js  c++  java
  • CD0J/POJ 851/3126 方老师与素数/Prime Path BFS

    Prime Path
    Time Limit: 1000MS   Memory Limit: 65536K
    Total Submissions: 9982   Accepted: 5724

    Description

    The ministers of the cabinet were quite upset by the message from the Chief of Security stating that they would all have to change the four-digit room numbers on their offices. 
    — It is a matter of security to change such things every now and then, to keep the enemy in the dark. 
    — But look, I have chosen my number 1033 for good reasons. I am the Prime minister, you know! 
    — I know, so therefore your new number 8179 is also a prime. You will just have to paste four new digits over the four old ones on your office door. 
    — No, it’s not that simple. Suppose that I change the first digit to an 8, then the number will read 8033 which is not a prime! 
    — I see, being the prime minister you cannot stand having a non-prime number on your door even for a few seconds. 
    — Correct! So I must invent a scheme for going from 1033 to 8179 by a path of prime numbers where only one digit is changed from one prime to the next prime. 

    Now, the minister of finance, who had been eavesdropping, intervened. 
    — No unnecessary expenditure, please! I happen to know that the price of a digit is one pound. 
    — Hmm, in that case I need a computer program to minimize the cost. You don't know some very cheap software gurus, do you? 
    — In fact, I do. You see, there is this programming contest going on... Help the prime minister to find the cheapest prime path between any two given four-digit primes! The first digit must be nonzero, of course. Here is a solution in the case above. 
    1033
    1733
    3733
    3739
    3779
    8779
    8179
    The cost of this solution is 6 pounds. Note that the digit 1 which got pasted over in step 2 can not be reused in the last step – a new 1 must be purchased.

    Input

    One line with a positive number: the number of test cases (at most 100). Then for each test case, one line with two numbers separated by a blank. Both numbers are four-digit primes (without leading zeros).

    Output

    One line for each case, either with a number stating the minimal cost or containing the word Impossible.

    Sample Input

    3
    1033 8179
    1373 8017
    1033 1033

    Sample Output

    6
    7
    0


    #include <cstdio>
    #include <cmath>
    #include <cstring>
    #include <ctime>
    #include <iostream>
    #include <algorithm>
    #include <set>
    #include <vector>
    #include <sstream>
    #include <queue>
    #include <typeinfo>
    #include <fstream>
    typedef long long ll;
    using namespace std;
    //freopen("D.in","r",stdin);
    //freopen("D.out","w",stdout);
    #define sspeed ios_base::sync_with_stdio(0);cin.tie(0)
    #define maxn 100001
    const int inf=0x7fffffff;   //无限大
    const int MAXN = 10000;
    bool flag[MAXN];
    int primes[MAXN], pi;
    struct point
    {
        int x;
        int y;
    };
    void GetPrime_1()
    {
        int i, j;
        pi = 0;
        memset(flag, false, sizeof(flag));
        for (i = 2; i < MAXN; i++)
            if (!flag[i])
            {
                primes[i] = 1;//素数标识为1
                for (j = i; j < MAXN; j += i)
                    flag[j] = true;
            }
    }
    int vis[maxn];
    int main()
    {
        GetPrime_1();
        int t;
        cin>>t;
        while(t--)
        {
            memset(vis,0,sizeof(vis));
            int n,m;
            cin>>n>>m;
            vis[n]=1;
            queue<point> q;
            q.push((point){n,0});
            int flag1=0;
            while(!q.empty())
            {
                point now=q.front();
                if(now.x==m)
                {
                    flag1=now.y;
                    break;
                }
                point next;
                for(int i=0;i<=9;i++)
                {
                    next.x=now.x/10;
                    next.x*=10;
                    next.x+=i;
                    next.y=now.y+1;
                    if(next.x<1000||next.x>=10000)
                        continue;
                    if(vis[next.x]==1)
                        continue;
                    if(next.x==m)
                    {
                        flag1=next.y;
                        break;
                    }
                    if(primes[next.x]==1)
                    {
                        //cout<<next.x<<endl;
                        vis[next.x]=1;
                        q.push(next);
                    }
    
                }
                for(int i=0;i<=9;i++)
                {
                    int temp=now.x%10;
                    next.x=now.x/100;
                    next.x*=100;
                    next.x+=i*10;
                    next.x+=temp;
                    if(next.x<1000||next.x>=10000)
                        continue;
                    if(vis[next.x]==1)
                        continue;
                    if(next.x==m)
                    {
                        flag1=next.y;
                        break;
                    }
                    if(primes[next.x]==1)
                    {
                        //cout<<next.x<<endl;
                        vis[next.x]=1;
                        q.push((point){next.x,now.y+1});
                    }
                }
                for(int i=0;i<=9;i++)
                {
                    int temp=now.x%100;
                    next.x=now.x/1000;
                    next.x*=1000;
                    next.x+=i*100;
                    next.x+=temp;
                    if(next.x<1000||next.x>=10000)
                        continue;
                    if(vis[next.x]==1)
                        continue;
                    if(next.x==m)
                    {
                        flag1=next.y;
                        break;
                    }
                    if(primes[next.x]==1)
                    {
                        //cout<<next.x<<endl;
                        vis[next.x]=1;
                        q.push((point){next.x,now.y+1});
                    }
                }
                for(int i=0;i<=9;i++)
                {
                    int temp=now.x%1000;
                    next.x=now.x/10000;
                    next.x*=10000;
                    next.x+=i*1000;
                    next.x+=temp;
                    if(next.x<1000||next.x>=10000)
                        continue;
                    if(vis[next.x]==1)
                        continue;
                    if(next.x==m)
                    {
                        flag1=next.y;
                        break;
                    }
                    if(primes[next.x]==1)
                    {
                    //    cout<<next.x<<endl;
                        vis[next.x]=1;
                        q.push((point){next.x,now.y+1});
                    }
                }
                if(flag1>0)
                break;
                q.pop();
            }
        printf("%d
    ",flag1);
        }
        return 0;
    }
  • 相关阅读:
    vue中创建全局单文件组件/命令
    export default与export的区别
    Android Fragment的使用(转载)
    ios 内存管理总结
    object-c 混编 调用C,C++接口
    Python3基础 yield send 获得生成器后,需要先启动一次
    Python3基础 yield next 获取生成器生出的值
    Python3基础 函数 无return、return 空或None 的效果相同
    Python3基础 函数 函数名赋值操作
    Python3基础 函数 函数名作为参数传给函数
  • 原文地址:https://www.cnblogs.com/qscqesze/p/4223350.html
Copyright © 2011-2022 走看看