Cheat Engine Tutorial v3--翻译Cheat Engine 6.1 tutorial（1）
说明：全文翻译均个人翻译、仅供参考，如果问题，请见谅。
原文：
Step 2: Exact Value scanning (PW=090453)
Now that you have opened the tutorial with Cheat Engine lets get on with the next step.
You see at the bottom of this window the text Health: xxx
Each time you click 'Hit me' your health gets decreased.
To get to the next step you have to find this value and change it to 1000
To find the value there are different ways, but I'll tell you about the easiest, 'Exact Value':
First make sure value type is set to at least 2 bytes or 4 bytes, 1 byte will also work, but you'll run into a (easy to fix)
problem when you've found the address and want to change it. The 8-byte may perhaps works if the
bytes after the address are 0, but I wouldn't take the bet.
Single, double, and the other scans just don't work, because they store the value in a different way.
When the value type is set correctly, make sure the scantype is set to 'Exact Value'
Then fill in the number your health is in the value box. And click 'First Scan'
After a while (if you have a extremely slow pc) the scan is done and the results are shown in the list on the
left
If you find more than 1 address and you don't know for sure which address it is, click 'Hit me', fill in the new
health value into the value box, and click 'Next Scan'
repeat this until you're sure you've found it. (that includes that there's only 1 address in the list.....)
Now double click the address in the list on the left. This makes the address pop-up in the list at the bottom,
showing you the current value.
Double click the value, (or select it and press enter), and change the value to 1000.
If everything went ok the next button should become enabled, and you're ready for the next step.
Note:
If you did anything wrong while scanning, click "New Scan" and repeat the scanning again.
Also, try playing around with the value and click 'hit me'
译文：
第二步：精确值查找(PW:090453)
现在你已经打开了Cheat Engine手册，让我们继续下一步。
在窗口底部你可以看到健康值：XXX
每次你点击“Hit me”你的健康就会减少。
为了进入下一步，你必须找到这个值并把它改为1000.
找到这个值有许多不同的方法，但我要讲的是最简单的，“Exact Value”：
首先确定值的类型在双字节或者4字节，单字节也可以，但当你找到地址并更改它时，你很容易就会发现问题。8字节也可以，如果地址是0，但我不负责。
单精度，双精度，其它扫描都不行，因为存储值方式不一致。
当设置正确值类型时，确定设置扫描类型为“Exact Value”
输入健康值在“Value”框内。点击"First Scan"
等一会(除非你的机器相当的慢)，扫描结束并且结果显示在列表中
如果你找到了多个地址，如果你不确定哪个是要找的，点击“Hit me”，输入新的健康值到“Value”框内，点击“Next Scan”
重复此操作至你确定你已找到地址。(当然，仅有一个地址在列表中。。)
现在，双击左侧在列表中的地址。这个操作会把此地址添加到CE下方，并且显示此地址的当前值。
双击“Value”属性值，(或者选择它并且按下Enter)，更改值为1000.
如果一切正常，“Next”键会显示为可用状态，你已经可以进入下一步。
注释：
如果你在扫描过程中有操作失误，点击“New Scan”并且重新扫描。
当然，也可以再次试试“Hit me”。