今天用CentOS挂载移动硬盘除了一些问题，就google了一下，这篇文章解决了我的问题。
3Q!
加粗部分为操作的command！！
This will make READONLY NTFS External USD Drive for Linux Operating System. You cannot write from Linux! 实际上可以读写的！！！
I just tried, it took me 15-30 minutes to start and setup.
Hence, this is workable solution. If you have any issues, update in comment.
I will try to help you!
First you need ntfs mount. For that you need to install two packages.
1、This gets your ntfs-3g
wget http://marush.com/wp-content/uploads/2009/03/ntfs-3g-200921-el5i686.rpm
Then run to install ntfs-3g
rpm -ihv ntfs-3g-200921-el5i686.rpm
Second get this fuse (I do not know why. Without fuse you can not mount ntfs-3g. Please go through fuse sourceforge document.)
mount /dev/sdb1 /500gb -t ntfs-3g -r -o umask=0222
已经可以开始读文件了，但不能写！
2、wget http://superb-east.dl.sourceforge.net/sourceforge/fuse/fuse-2.6.0.tar.gz
如果下载不到可以google一下，我下载的是2.7.4版本
Then execute the following
tar xvfz fuse-2.7.4.tar
It creates a directory “fuse-2.7.4″
cd fuse-2.7.4
Execute
./configure
make
make install
3、测试
Then try
fdisk -l /dev/hda
You get
[root@prod soft]# fdisk -l /dev/hda
Disk /dev/hda: 536 MB, 536870912 bytes
32 heads, 63 sectors/track, 520 cylinders
Units = cylinders of 2016 * 512 = 1032192 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 20 20128+ 7 HPFS/NTFS
/dev/hda2 21 40 20160 4 FAT16 <32M
/dev/hda3 41 121 81648 b W95 FAT32
Mount with following command.
Here you go!
mkdir /mnt/ntfs
mount /dev/sdb1 /500gb -t ntfs-3g -r -o umask=0222
mount -t ntfs-3g /dev/hda1 /mnt/ntfs
cd /mnt/ntfs
cp 20m.txt test.txt
cd /
umount /mnt/ntfs
mount -t ntfs-3g /dev/hda1 /mnt/ntfs
cat /mnt/ntfs/test.txt
Check your drive now