zoukankan      html  css  js  c++  java

  • iOS cocopods安装使用和安装过程中遇到的问题及解决办法

     

         在osx 10.11之前cocopods问题不多，但是升级到11之后的版本，之前的cocopods大多用不了，需要重新安装，对于我这种使用测试版系统的技术狂来说，每次都需要重新安装很多东西，

    当然，cocopods也避免不了安装很多次了。

           对于新手来说，使用cocopods开发，还是节省了相当多的开发时间，以下便是cocopods安装和安装过程中遇到的问题及解决办法：

    新电脑新系统测试安装！

    【注：可以直接从第二步开始安装】
    2、出现以下问题，大家不要慌：
     
    复制代码
    1 boai:~ boai$ sudo gem install cocoapods
2 ERROR:  Could not find a valid gem 'cocoapods' (>= 0), here is why:
3           Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)
4 boai:~ boai$ sudo gem install cocoapods 
5 ERROR:  Could not find a valid gem 'cocoapods' (>= 0), here is why:
6           Unable to download data from http://ruby.taobao.org/ - bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)
7 boai:~ boai$ sudo gem update --system
8 ERROR:  While executing gem ... (Gem::RemoteFetcher::FetchError)
9     bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)
    复制代码

    解决办法：

    （1）先执行下面两行代码：

    1 sudo gem sources -r https://rubygems.org

    2 sudo gem sources -a http://rubygems.org 

    （2）执行过程如下：

    1 boai:~ boai$ sudo gem sources -r https://rubygems.org
2 source https://rubygems.org not present in cache
3 boai:~ boai$ sudo gem sources -a http://rubygems.org
4 https://rubygems.org is recommended for security over http://rubygems.org
5 
6 Do you want to add this insecure source? [yn]  y

    最后会提示

    Do you want to add this insecure source? [yn]  
    你选择 y就行了
    然后出现：
    http://rubygems.org added to sources

    这就说明成功了，就可以执行下面的安装了。

    在2016年7月1日开始，会出现以下错误，

    rvm: command not found Mac

    activesupport requires Ruby version >= 2.2.2.

    这两种错误的解决办法如下;

    强烈建议 使用rvm安装ruby

    1、安装 RVM

    RVM:Ruby Version Manager,Ruby版本管理器，包括Ruby的版本管理和Gem库管理(gemset)

    1. $ curl -L get.rvm.io | bash -s stable  

    等待一段时间后就可以成功安装好 RVM。

    1. $ source ~/.bashrc  
    2. $ source ~/.bash_profile 

    测试是否安装正常

     rvm -v 

     2、用RVM升级Ruby
    1. #查看当前ruby版本  
    2. $ ruby -v  
    3. ruby 1.8.7  
    4. #列出已知的ruby版本  
    5. $ rvm list known  
    6. #安装ruby 2.3.0  

    7. boaideMacBook:~ boai$ rvm install 2.3.0

    期间会让你输入两次回车键，记得哦，别像我一样傻等了半天，以为网卡呢， 
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    boaideMacBook:~ boai$ rvm install 2.3.0
    Searching for binary rubies, this might take some time.
    No binary rubies available for: osx/10.11/x86_64/ruby-2.3.0.
    Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies.
    Checking requirements for osx.
    About to install Homebrew, press `Enter` for default installation in `/usr/local`,
    type new path if you wish custom Homebrew installation (the path needs to be writable for user)
    :
    ==> This script will install:
    /usr/local/bin/brew
    /usr/local/Library/...
    /usr/local/share/doc/homebrew
    /usr/local/share/man/man1/brew.1
    /usr/local/share/zsh/site-functions/_brew
    /usr/local/etc/bash_completion.d/brew
    ==> The following directories will be made group writable:
    /usr/local/.
    ==> The following directories will have their owner set to boai:
    /usr/local/.
    ==> The following directories will have their group set to admin:
    /usr/local/.
     
    Press RETURN to continue or any other key to abort
    ==> /usr/bin/sudo /bin/chmod g+rwx /usr/local/.
    Password:
    ==> /usr/bin/sudo /usr/sbin/chown boai /usr/local/.
    ==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local/.
    ==> /usr/bin/sudo /bin/mkdir /Users/boai/Library/Caches/Homebrew
    ==> /usr/bin/sudo /bin/chmod g+rwx /Users/boai/Library/Caches/Homebrew
    ==> /usr/bin/sudo /usr/sbin/chown boai /Users/boai/Library/Caches/Homebrew
    ==> Downloading and installing Homebrew...
    remote: Counting objects: 520, done.
    remote: Compressing objects: 100% (461/461), done.
    remote: Total 520 (delta 30), reused 318 (delta 28), pack-reused 0
    Receiving objects: 100% (520/520), 786.43 KiB | 146.00 KiB/s, done.
    Resolving deltas: 100% (30/30), done.
    From https://github.com/Homebrew/brew
     * [new branch]      master     -> origin/master
    HEAD is now at 5768e32 test-bot: fix coverage on Travis CI
    ==> Tapping homebrew/core
    Cloning into '/usr/local/Library/Taps/homebrew/homebrew-core'...
    remote: Counting objects: 3718, done.
    remote: Compressing objects: 100% (3605/3605), done.
    remote: Total 3718 (delta 7), reused 2085 (delta 4), pack-reused 0
    Receiving objects: 100% (3718/3718), 2.89 MiB | 521.00 KiB/s, done.
    Resolving deltas: 100% (7/7), done.
    Checking connectivity... done.
    Tapped 3596 formulae (3,744 files, 9.0M)
    ==> Installation successful!
    ==> Next steps
    Run `brew help` to get started
    Further documentation: https://git.io/brew-docs
    ==> Homebrew has enabled anonymous aggregate user behaviour analytics
    Read the analytics documentation (and how to opt-out) here:
      https://git.io/brew-analytics
    Installing requirements for osx.
    Updating system.....
    Installing required packages: autoconf, automake, libtool, pkg-config, libyaml, readline, libksba, openssl........
    Certificates in '/usr/local/etc/openssl/cert.pem' are already up to date.
    Requirements installation successful.
    Installing Ruby from source to: /Users/boai/.rvm/rubies/ruby-2.3.0, this may take a while depending on your cpu(s)...
    ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
    100 13.5M  100 13.5M    0     0  3078k      0  0:00:04  0:00:04 --:--:-- 3477k
    ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....
    ruby-2.3.0 - #configuring....................................................

     时间比较长：

     安装成功后提示:

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    ruby-2.3.0 - #downloading ruby-2.3.0, this may take a while depending on your connection...
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
    100 13.5M  100 13.5M    0     0  3078k      0  0:00:04  0:00:04 --:--:-- 3477k
    ruby-2.3.0 - #extracting ruby-2.3.0 to /Users/boai/.rvm/src/ruby-2.3.0....
    ruby-2.3.0 - #configuring......................................................|
    ruby-2.3.0 - #post-configuration.
    ruby-2.3.0 - #compiling........................................................|
    ruby-2.3.0 - #installing.........
    ruby-2.3.0 - #making binaries executable..
    Installed rubygems 2.5.1 is newer than 2.4.8 provided with installed ruby, skipping installation, use --force to force installation.
    ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0@global
    ruby-2.3.0 - #importing gemset /Users/boai/.rvm/gemsets/global.gems............|
    ruby-2.3.0 - #generating global wrappers........
    ruby-2.3.0 - #gemset created /Users/boai/.rvm/gems/ruby-2.3.0
    ruby-2.3.0 - #importing gemsetfile /Users/boai/.rvm/gemsets/default.gems evaluated to empty gem list
    ruby-2.3.0 - #generating default wrappers........
    ruby-2.3.0 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake).
    Install of ruby-2.3.0 - #complete
    Ruby was built without documentation, to build it run: rvm docs generate-ri
    boaideMacBook:~ boai$

     然后再执行这句代码:

    1 boai:~ boai$ sudo gem install cocoapods
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
    31
    32
    33
    34
    35
    36
    37
    38
    39
    40
    41
    42
    43
    44
    45
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    60
    61
    62
    63
    64
    65
    66
    67
    68
    69
    70
    71
    72
    73
    74
    75
    76
    77
    78
    79
    80
    81
    82
    83
    84
    85
    86
    87
    88
    89
    90
    91
    92
    93
    94
    95
    96
    97
    boaideMacBook:~ boai$ sudo gem install cocoapods
    Password:
    Fetching: i18n-0.7.0.gem (100%)
    Successfully installed i18n-0.7.0
    Fetching: thread_safe-0.3.5.gem (100%)
    Successfully installed thread_safe-0.3.5
    Fetching: tzinfo-1.2.2.gem (100%)
    Successfully installed tzinfo-1.2.2
    Fetching: concurrent-ruby-1.0.2.gem (100%)
    Successfully installed concurrent-ruby-1.0.2
    Fetching: activesupport-5.0.0.gem (100%)
    Successfully installed activesupport-5.0.0
    Fetching: nap-1.1.0.gem (100%)
    Successfully installed nap-1.1.0
    Fetching: fuzzy_match-2.0.4.gem (100%)
    Successfully installed fuzzy_match-2.0.4
    Fetching: cocoapods-core-1.0.1.gem (100%)
    Successfully installed cocoapods-core-1.0.1
    Fetching: claide-1.0.0.gem (100%)
    Successfully installed claide-1.0.0
    Fetching: cocoapods-deintegrate-1.0.0.gem (100%)
    Successfully installed cocoapods-deintegrate-1.0.0
    Fetching: cocoapods-downloader-1.1.0.gem (100%)
    Successfully installed cocoapods-downloader-1.1.0
    Fetching: cocoapods-plugins-1.0.0.gem (100%)
    Successfully installed cocoapods-plugins-1.0.0
    Fetching: cocoapods-search-1.0.0.gem (100%)
    Successfully installed cocoapods-search-1.0.0
    Fetching: cocoapods-stats-1.0.0.gem (100%)
    Successfully installed cocoapods-stats-1.0.0
    Fetching: netrc-0.7.8.gem (100%)
    Successfully installed netrc-0.7.8
    Fetching: cocoapods-trunk-1.0.0.gem (100%)
    Successfully installed cocoapods-trunk-1.0.0
    Fetching: cocoapods-try-1.1.0.gem (100%)
    Successfully installed cocoapods-try-1.1.0
    Fetching: molinillo-0.4.5.gem (100%)
    Successfully installed molinillo-0.4.5
    Fetching: colored-1.2.gem (100%)
    Successfully installed colored-1.2
    Fetching: xcodeproj-1.2.0.gem (100%)
    Successfully installed xcodeproj-1.2.0
    Fetching: escape-0.0.4.gem (100%)
    Successfully installed escape-0.0.4
    Fetching: fourflusher-0.3.2.gem (100%)
    Successfully installed fourflusher-0.3.2
    Fetching: cocoapods-1.0.1.gem (100%)
    Successfully installed cocoapods-1.0.1
    Parsing documentation for i18n-0.7.0
    Installing ri documentation for i18n-0.7.0
    Parsing documentation for thread_safe-0.3.5
    Installing ri documentation for thread_safe-0.3.5
    Parsing documentation for tzinfo-1.2.2
    Installing ri documentation for tzinfo-1.2.2
    Parsing documentation for concurrent-ruby-1.0.2
    Installing ri documentation for concurrent-ruby-1.0.2
    Parsing documentation for activesupport-5.0.0
    Installing ri documentation for activesupport-5.0.0
    Parsing documentation for nap-1.1.0
    Installing ri documentation for nap-1.1.0
    Parsing documentation for fuzzy_match-2.0.4
    Installing ri documentation for fuzzy_match-2.0.4
    Parsing documentation for cocoapods-core-1.0.1
    Installing ri documentation for cocoapods-core-1.0.1
    Parsing documentation for claide-1.0.0
    Installing ri documentation for claide-1.0.0
    Parsing documentation for cocoapods-deintegrate-1.0.0
    Installing ri documentation for cocoapods-deintegrate-1.0.0
    Parsing documentation for cocoapods-downloader-1.1.0
    Installing ri documentation for cocoapods-downloader-1.1.0
    Parsing documentation for cocoapods-plugins-1.0.0
    Installing ri documentation for cocoapods-plugins-1.0.0
    Parsing documentation for cocoapods-search-1.0.0
    Installing ri documentation for cocoapods-search-1.0.0
    Parsing documentation for cocoapods-stats-1.0.0
    Installing ri documentation for cocoapods-stats-1.0.0
    Parsing documentation for netrc-0.7.8
    Installing ri documentation for netrc-0.7.8
    Parsing documentation for cocoapods-trunk-1.0.0
    Installing ri documentation for cocoapods-trunk-1.0.0
    Parsing documentation for cocoapods-try-1.1.0
    Installing ri documentation for cocoapods-try-1.1.0
    Parsing documentation for molinillo-0.4.5
    Installing ri documentation for molinillo-0.4.5
    Parsing documentation for colored-1.2
    Installing ri documentation for colored-1.2
    Parsing documentation for xcodeproj-1.2.0
    Installing ri documentation for xcodeproj-1.2.0
    Parsing documentation for escape-0.0.4
    Installing ri documentation for escape-0.0.4
    Parsing documentation for fourflusher-0.3.2
    Installing ri documentation for fourflusher-0.3.2
    Parsing documentation for cocoapods-1.0.1
    Installing ri documentation for cocoapods-1.0.1
    Done installing documentation for i18n, thread_safe, tzinfo, concurrent-ruby, activesupport, nap, fuzzy_match, cocoapods-core, claide, cocoapods-deintegrate, cocoapods-downloader, cocoapods-plugins, cocoapods-search, cocoapods-stats, netrc, cocoapods-trunk, cocoapods-try, molinillo, colored, xcodeproj, escape, fourflusher, cocoapods after 24 seconds
    23 gems installed
    boaideMacBook:~ boai$

     这就代表安装成功了！

    3、安装cocopods

    执行下面的语句：

     1 sudo gem install cocoapods 

    据说新版本改了，没有验证，大家可以试试看：

    1
    sudo gem install -n /usr/local/bin cocoapods

    会出现下面的界面：（激动。。。）

    复制代码
    boai:~ boai$ sudo gem install cocoapods
Fetching: nap-1.0.0.gem (100%)
Successfully installed nap-1.0.0
Fetching: thread_safe-0.3.5.gem (100%)
Successfully installed thread_safe-0.3.5
Fetching: tzinfo-1.2.2.gem (100%)
Successfully installed tzinfo-1.2.2
Fetching: i18n-0.7.0.gem (100%)
Successfully installed i18n-0.7.0
Fetching: activesupport-4.2.5.gem (100%)
Successfully installed activesupport-4.2.5
Fetching: escape-0.0.4.gem (100%)
Successfully installed escape-0.0.4
Fetching: colored-1.2.gem (100%)
Successfully installed colored-1.2
Fetching: molinillo-0.4.0.gem (100%)
Successfully installed molinillo-0.4.0
Fetching: netrc-0.7.8.gem (100%)
Successfully installed netrc-0.7.8
Fetching: cocoapods-trunk-0.6.4.gem (100%)
Successfully installed cocoapods-trunk-0.6.4
Fetching: cocoapods-try-0.5.1.gem (100%)
Successfully installed cocoapods-try-0.5.1
Fetching: cocoapods-stats-0.6.2.gem (100%)
Successfully installed cocoapods-stats-0.6.2
Fetching: cocoapods-search-0.1.0.gem (100%)
Successfully installed cocoapods-search-0.1.0
Fetching: cocoapods-plugins-0.4.2.gem (100%)
Successfully installed cocoapods-plugins-0.4.2
Fetching: cocoapods-downloader-0.9.3.gem (100%)
Successfully installed cocoapods-downloader-0.9.3
Fetching: claide-0.9.1.gem (100%)
Successfully installed claide-0.9.1
Fetching: xcodeproj-0.28.2.gem (100%)
Successfully installed xcodeproj-0.28.2
Fetching: fuzzy_match-2.0.4.gem (100%)
Successfully installed fuzzy_match-2.0.4
Fetching: cocoapods-core-0.39.0.gem (100%)
Successfully installed cocoapods-core-0.39.0
Fetching: cocoapods-0.39.0.gem (100%)
Successfully installed cocoapods-0.39.0
Parsing documentation for nap-1.0.0
Installing ri documentation for nap-1.0.0
Parsing documentation for thread_safe-0.3.5
Installing ri documentation for thread_safe-0.3.5
Parsing documentation for tzinfo-1.2.2
Installing ri documentation for tzinfo-1.2.2
Parsing documentation for i18n-0.7.0
Installing ri documentation for i18n-0.7.0
Parsing documentation for activesupport-4.2.5
Installing ri documentation for activesupport-4.2.5
Parsing documentation for escape-0.0.4
Installing ri documentation for escape-0.0.4
Parsing documentation for colored-1.2
Installing ri documentation for colored-1.2
Parsing documentation for molinillo-0.4.0
Installing ri documentation for molinillo-0.4.0
Parsing documentation for netrc-0.7.8
Installing ri documentation for netrc-0.7.8
Parsing documentation for cocoapods-trunk-0.6.4
Installing ri documentation for cocoapods-trunk-0.6.4
Parsing documentation for cocoapods-try-0.5.1
Installing ri documentation for cocoapods-try-0.5.1
Parsing documentation for cocoapods-stats-0.6.2
Installing ri documentation for cocoapods-stats-0.6.2
Parsing documentation for cocoapods-search-0.1.0
Installing ri documentation for cocoapods-search-0.1.0
Parsing documentation for cocoapods-plugins-0.4.2
Installing ri documentation for cocoapods-plugins-0.4.2
Parsing documentation for cocoapods-downloader-0.9.3
Installing ri documentation for cocoapods-downloader-0.9.3
Parsing documentation for claide-0.9.1
Installing ri documentation for claide-0.9.1
Parsing documentation for xcodeproj-0.28.2
Installing ri documentation for xcodeproj-0.28.2
Parsing documentation for fuzzy_match-2.0.4
Installing ri documentation for fuzzy_match-2.0.4
Parsing documentation for cocoapods-core-0.39.0
Installing ri documentation for cocoapods-core-0.39.0
Parsing documentation for cocoapods-0.39.0
Installing ri documentation for cocoapods-0.39.0
Done installing documentation for nap, thread_safe, tzinfo, i18n, activesupport, escape, colored, molinillo, netrc, cocoapods-trunk, cocoapods-try, cocoapods-stats, cocoapods-search, cocoapods-plugins, cocoapods-downloader, claide, xcodeproj, fuzzy_match, cocoapods-core, cocoapods after 21 seconds
WARNING:  Unable to pull data from 'http://ruby.taobao.org/': bad response Not Found 404 (http://ruby.taobao.org/specs.4.8.gz)
20 gems installed
    复制代码

    看到最后一行代码，你就放120个心吧。。。

    然后就可以查看你的pods版本了：

    输入：pod

    然后会出现下面的代码：

    复制代码
    boai:~ boai$ pod
Usage:

    $ pod COMMAND

      CocoaPods, the Cocoa library package manager.

Commands:

    + cache      Manipulate the CocoaPods cache
    + init       Generate a Podfile for the current directory.
    + install    Install project dependencies to Podfile.lock versions
    + ipc        Inter-process communication
    + lib        Develop pods
    + list       List pods
    + outdated   Show outdated project dependencies
    + plugins    Show available CocoaPods plugins
    + repo       Manage spec-repositories
    + search     Search for pods.
    + setup      Setup the CocoaPods environment
    + spec       Manage pod specs
    + trunk      Interact with the CocoaPods API (e.g. publishing new specs)
    + try        Try a Pod!
    + update     Update outdated project dependencies and create new
                 Podfile.lock

Options:

    --silent     Show nothing
    --version    Show the version of the tool
    --verbose    Show more debugging information
    --no-ansi    Show output without ANSI codes
    --help       Show help banner of specified command
boai:~ boai$
    复制代码

    这就安装成功了，就可以正常使用pod了。。。

    4、接下来就可以在项目中使用了，

    打开终端：

    cd 你的项目路径

    boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest

    然后：输入touch podfile  或者 pod init (会自动生成podfile文件)

    boai:BAPDCViewTest boai$ pod init

boai:BAPDCViewTest boai$ pod install

    接下来出现：

    复制代码
    Last login: Fri Nov 20 11:02:59 on ttys006

boai:~ boai$ cd /Users/boai/Documents/博爱项目/BAPDCViewTest 

boai:BAPDCViewTest boai$ touch podfile

boai:BAPDCViewTest boai$ pod install

Updating local specs repositories

Analyzing dependencies

Downloading dependencies

Generating Pods project

Integrating client project

 

[!] Please close any current Xcode sessions and use `BAPDCViewTest.xcworkspace` for this project from now on.

Sending stats

Pod installation complete! There are 0 dependencies from the Podfile and 0 total

pods installed.

 

[!] [!] The Podfile does not contain any dependencies.

boai:BAPDCViewTest boai$
    复制代码

    这就成功了，然后再看看你的项目路径里面，是不是多出来很多文件？

    如下图：

    然后双击***.workspace 文件就可以使用pods了！

    5、新版本pod 安装问题：

    podfile升级之后到最新版本，pod里的内容必须明确指出所用第三方库的target，否则会出现The dependency `` is not used in any concrete target这样的错误。

    以下从三个步骤陈述：

    4.1. Podfile升级

    查看pod版本：

    1
    pod --version

     pod 升级（此时是升级到1.0.0.beta.2版本）：

    1
    sudo gem install cocoapods --pre

    4.2. 错误内容：

    我的Podfile的内容是：

    1
    pod ‘SDWebImage‘, ‘3.6‘

    pod install后出现错误The dependency `` is not used in any concrete target

    1
    2
    3
    4
    5
    6
    7
    8
    pod install
    /System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/universal-darwin14/rbconfig.rb:213: warning: Insecure world writable dir /Applications/Cocos/tools/ant/bin in PATH, mode 040777
    Re-creating CocoaPods due to major version update.
    Updating local specs repositories
    Analyzing dependencies
     
     
    The dependency `SDWebImage (= 3.6)` is not used in any concrete target.

    4.3. 修改方法：

    Podfile内容更改：

    步骤：

    4.3.1 双击双击***.workspace 文件，打开项目

    4.3.2 拉到最下面，找到pods，打开后点击podfile文件，

    4.3.3 在podfile里面添加所需要的三方库

    最终的podfile 文件规范内容为下：

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    # Uncomment this line to define a global platform for your project
    # platform :ios, '8.0'
    # Uncomment this line if you're using Swift
    # use_frameworks!<br><br># 注意：xcodeproj '***.xcodeproj'  这句新版本必须要写上，***为你的工程名字，最下面记得要加上  @end
    xcodeproj 'BABaseProject.xcodeproj'
     
     
    # 去掉由pod引入的第三方库的警告，需要更新命令才生效
    inhibit_all_warnings!
     
    target 'BABaseProject' do
         
        # 对系统原生的AutoLayout 的 NSLayoutConstraints类的封装，优雅的链式语法，GitHub 排名第三
        pod 'Masonry', '~> 0.6.4'
        # 两个都是自动布局框架
        pod 'SDAutoLayout', '~> 1.31'
     
        # 自定义button框架
        pod 'BAButton', '~> 1.0.1'
     
    end
     
    target 'BABaseProjectTests' do
         
    end
     
    target 'BABaseProjectUITests' do
         
    end

     4.3.4 完成podfile 的内容更改后，记得 cmd + s 保存更改，然后打开终端

    4.3.5  在终端中cd 项目路径，打开项目后，输入： 

    1
    2
    3
    4
    5
    6
    7
    8
    9
    pod install --verbose --no-repo-update
     
    pod update --verbose --no-repo-update
     
    或者
     
    pod install --no-repo-update
     
    pod update --no-repo-update

    然后看你的项目路径pod下面， 是不是已经添加了你所需要的三方库呢？

    如果更新pod 的时候出现这个问题：

    安装cocoapods遇到error: RPC failed; curl 56 SSLRead() return error -36问题

    解决办法如下：终端输入以下代码：

    <code
     class="hljs cs has-numbering" style="display: block; padding: 0px;
    color: inherit; box-sizing: border-box;
    font-family: 'Source Code Pro', monospace;font-size:undefined;
    white-space: pre; border-top-left-radius: 0px; border-top-right-radius:
    0px; border-bottom-right-radius: 0px; border-bottom-left-radius: 0px;
    word-wrap: normal; background-position: initial initial;
    background-repeat: initial initial;">sudo xcode-<span
    class="hljs-keyword" style="color: rgb(0, 0, 136); box-sizing:
    border-box;">select</span> -<span class="hljs-keyword"
    style="color: rgb(0, 0, 136); box-sizing:
    border-box;">switch</span>
    /Applications/Xcode.app/Contents/Developers</code><ul
    class="pre-numbering" style="box-sizing: border-box; position: absolute;
      50px; top: 0px; left: 0px;
     margin: 0px; padding: 6px 0px 40px; border-right- 1px;
    border-right-style: solid; border-right-color: rgb(221, 221, 221);
    list-style: none; text-align: right;"><li style="box-sizing:
    border-box; padding: 0px 5px;">1</li></ul><ul
    class="pre-numbering" style="box-sizing: border-box; position: absolute;
      50px; top: 0px; left: 0px;
     margin: 0px; padding: 6px 0px 40px; border-right- 1px;
    border-right-style: solid; border-right-color: rgb(221, 221, 221);
    list-style: none; text-align: right;"><li style="box-sizing:
    border-box; padding: 0px 5px;">1</li></ul>

    然后再更新pod试试！

    如果出现这个：

    1
    [!] xcodeproj was renamed to `project`. Please use that from now on.

     只需要将这里的名字改过来就行了：

    复制代码
     1 # Uncomment this line to define a global platform for your project
 2 # platform :ios, '8.0'
 3 # Uncomment this line if you're using Swift
 4 # use_frameworks!
 5 
 6 project 'BABaseProject.project'
 7 
 8 
 9 # 去掉由pod引入的第三方库的警告，需要更新命令才生效
10 inhibit_all_warnings!
11 
12 # pod 快速更新方法
13 # pod update --verbose --no-repo-update
14 
15 target 'BABaseProject' do
    复制代码

     
  • 相关阅读:
    Kafka-1
    消息队列
    分布式分类
    认识分布式
    数据库引擎
    Django插入多条数据—bulk_create
    Django中update和save()同时作用
    联合唯一去重的SQL
    Direct3D11学习：（三）Direct3D11初始化
    Direct3D11学习：（零）常见问题及解决方法整理
  • 原文地址：https://www.cnblogs.com/sunfuyou/p/6877217.html
Copyright © 2011-2022 走看看