java io

之前的博客总是不是从书中摘录就是从别人的文章中copy点，加点自己轻微的思考，就认为，哇，我又完成一篇。现在要尝试，尽量（有些类啊API啊还是要copy滴）不拷贝任何文章书籍，自己写！

　　java io在编程中或多或少都遇到，比如读取文件了，比如接口返回的是一堆流信息。那么针对这些流怎么处理呢?这时候就是io上场的时候了。jdk1.4之后加入了新的io叫nio，之前我总是不明白，既然都有了更好的nio了，那为何还不淘汰掉旧io呢？随着书籍和文章的阅读，代码的查阅，对这个问题终于知道了一些。两者的适用场景不同。正如他们的实现方式不一样。一个阻塞，一个非阻塞。

　　首先呢，我先来记录下近期对io的理解。

　　网上搜索关于java io总会出现一大堆的类的继承图，看得人昏昏欲睡，一点学习的念头都没，那么多类，那么多继承关系。其实呢这么多累的关系之所以看起来那么复杂，是因为没有明白一个设计模式，叫做装饰器模式。接口InputStream不用说，定义功能的。他下面的继承类中只需要关注这么几个（我个人觉得）ByteArrayInputStream（比特数组流）,StringInputStream（字符串流）,PipedInputStream（管道流）,FileInputStream（文件流），DataInputStream,FilterInputStream（装饰器）。根据他们的名字，差不多就能知道他们的适用场景。具体的每个流的demo要不要贴，后面再思考吧。先讲讲FilterInputStream，FilterInputStream就是传说中的装饰器，下面让我们来个他的源码

　　

/*
 * Copyright (c) 1994, 2010, Oracle and/or its affiliates. All rights reserved.
 * ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 */

package java.io;

/**
 * A <code>FilterInputStream</code> contains
 * some other input stream, which it uses as
 * its  basic source of data, possibly transforming
 * the data along the way or providing  additional
 * functionality. The class <code>FilterInputStream</code>
 * itself simply overrides all  methods of
 * <code>InputStream</code> with versions that
 * pass all requests to the contained  input
 * stream. Subclasses of <code>FilterInputStream</code>
 * may further override some of  these methods
 * and may also provide additional methods
 * and fields.
 *
 * @author  Jonathan Payne
 * @since   JDK1.0
 */
public
class FilterInputStream extends InputStream {
    /**
     * The input stream to be filtered.
     */
    protected volatile InputStream in;

    /**
     * Creates a <code>FilterInputStream</code>
     * by assigning the  argument <code>in</code>
     * to the field <code>this.in</code> so as
     * to remember it for later use.
     *
     * @param   in   the underlying input stream, or <code>null</code> if
     *          this instance is to be created without an underlying stream.
     */
    protected FilterInputStream(InputStream in) {
        this.in = in;
    }

    /**
     * Reads the next byte of data from this input stream. The value
     * byte is returned as an <code>int</code> in the range
     * <code>0</code> to <code>255</code>. If no byte is available
     * because the end of the stream has been reached, the value
     * <code>-1</code> is returned. This method blocks until input data
     * is available, the end of the stream is detected, or an exception
     * is thrown.
     * <p>
     * This method
     * simply performs <code>in.read()</code> and returns the result.
     *
     * @return     the next byte of data, or <code>-1</code> if the end of the
     *             stream is reached.
     * @exception  IOException  if an I/O error occurs.
     * @see        java.io.FilterInputStream#in
     */
    public int read() throws IOException {
        return in.read();
    }

    /**
     * Reads up to <code>byte.length</code> bytes of data from this
     * input stream into an array of bytes. This method blocks until some
     * input is available.
     * <p>
     * This method simply performs the call
     * <code>read(b, 0, b.length)</code> and returns
     * the  result. It is important that it does
     * <i>not</i> do <code>in.read(b)</code> instead;
     * certain subclasses of  <code>FilterInputStream</code>
     * depend on the implementation strategy actually
     * used.
     *
     * @param      b   the buffer into which the data is read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  IOException  if an I/O error occurs.
     * @see        java.io.FilterInputStream#read(byte[], int, int)
     */
    public int read(byte b[]) throws IOException {
        return read(b, 0, b.length);
    }

    /**
     * Reads up to <code>len</code> bytes of data from this input stream
     * into an array of bytes. If <code>len</code> is not zero, the method
     * blocks until some input is available; otherwise, no
     * bytes are read and <code>0</code> is returned.
     * <p>
     * This method simply performs <code>in.read(b, off, len)</code>
     * and returns the result.
     *
     * @param      b     the buffer into which the data is read.
     * @param      off   the start offset in the destination array <code>b</code>
     * @param      len   the maximum number of bytes read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  NullPointerException If <code>b</code> is <code>null</code>.
     * @exception  IndexOutOfBoundsException If <code>off</code> is negative,
     * <code>len</code> is negative, or <code>len</code> is greater than
     * <code>b.length - off</code>
     * @exception  IOException  if an I/O error occurs.
     * @see        java.io.FilterInputStream#in
     */
    public int read(byte b[], int off, int len) throws IOException {
        return in.read(b, off, len);
    }

    /**
     * Skips over and discards <code>n</code> bytes of data from the
     * input stream. The <code>skip</code> method may, for a variety of
     * reasons, end up skipping over some smaller number of bytes,
     * possibly <code>0</code>. The actual number of bytes skipped is
     * returned.
     * <p>
     * This method simply performs <code>in.skip(n)</code>.
     *
     * @param      n   the number of bytes to be skipped.
     * @return     the actual number of bytes skipped.
     * @exception  IOException  if the stream does not support seek,
     *                          or if some other I/O error occurs.
     */
    public long skip(long n) throws IOException {
        return in.skip(n);
    }

    /**
     * Returns an estimate of the number of bytes that can be read (or
     * skipped over) from this input stream without blocking by the next
     * caller of a method for this input stream. The next caller might be
     * the same thread or another thread.  A single read or skip of this
     * many bytes will not block, but may read or skip fewer bytes.
     * <p>
     * This method returns the result of {@link #in in}.available().
     *
     * @return     an estimate of the number of bytes that can be read (or skipped
     *             over) from this input stream without blocking.
     * @exception  IOException  if an I/O error occurs.
     */
    public int available() throws IOException {
        return in.available();
    }

    /**
     * Closes this input stream and releases any system resources
     * associated with the stream.
     * This
     * method simply performs <code>in.close()</code>.
     *
     * @exception  IOException  if an I/O error occurs.
     * @see        java.io.FilterInputStream#in
     */
    public void close() throws IOException {
        in.close();
    }

    /**
     * Marks the current position in this input stream. A subsequent
     * call to the <code>reset</code> method repositions this stream at
     * the last marked position so that subsequent reads re-read the same bytes.
     * <p>
     * The <code>readlimit</code> argument tells this input stream to
     * allow that many bytes to be read before the mark position gets
     * invalidated.
     * <p>
     * This method simply performs <code>in.mark(readlimit)</code>.
     *
     * @param   readlimit   the maximum limit of bytes that can be read before
     *                      the mark position becomes invalid.
     * @see     java.io.FilterInputStream#in
     * @see     java.io.FilterInputStream#reset()
     */
    public synchronized void mark(int readlimit) {
        in.mark(readlimit);
    }

    /**
     * Repositions this stream to the position at the time the
     * <code>mark</code> method was last called on this input stream.
     * <p>
     * This method
     * simply performs <code>in.reset()</code>.
     * <p>
     * Stream marks are intended to be used in
     * situations where you need to read ahead a little to see what's in
     * the stream. Often this is most easily done by invoking some
     * general parser. If the stream is of the type handled by the
     * parse, it just chugs along happily. If the stream is not of
     * that type, the parser should toss an exception when it fails.
     * If this happens within readlimit bytes, it allows the outer
     * code to reset the stream and try another parser.
     *
     * @exception  IOException  if the stream has not been marked or if the
     *               mark has been invalidated.
     * @see        java.io.FilterInputStream#in
     * @see        java.io.FilterInputStream#mark(int)
     */
    public synchronized void reset() throws IOException {
        in.reset();
    }

    /**
     * Tests if this input stream supports the <code>mark</code>
     * and <code>reset</code> methods.
     * This method
     * simply performs <code>in.markSupported()</code>.
     *
     * @return  <code>true</code> if this stream type supports the
     *          <code>mark</code> and <code>reset</code> method;
     *          <code>false</code> otherwise.
     * @see     java.io.FilterInputStream#in
     * @see     java.io.InputStream#mark(int)
     * @see     java.io.InputStream#reset()
     */
    public boolean markSupported() {
        return in.markSupported();
    }
}

　　仔细观察，你会发现，这家伙在开始就有这么个定义

　　　/**
     * The input stream to be filtered.
     */
    protected volatile InputStream in;

这是啥？我的第一感觉就是。这不是策略模式的形状吗？

这里的FilterInputStream其实什么都不做的，真正干活的是传给他的in，而他的子类就是利用那些传进来的in做一些功能处理。比如我最常用的BufferedInputStream就是增加了缓存这一步骤，从而实现效率，不过看BufferedInputStream的源码，你会发现，真正读取流信息的动作还是传给他的in！，下面上BufferedInputStream的代码。

/*
 * Copyright (c) 1994, 2010, Oracle and/or its affiliates. All rights reserved.
 * ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 *
 */

package java.io;
import java.util.concurrent.atomic.AtomicReferenceFieldUpdater;

/**
 * A <code>BufferedInputStream</code> adds
 * functionality to another input stream-namely,
 * the ability to buffer the input and to
 * support the <code>mark</code> and <code>reset</code>
 * methods. When  the <code>BufferedInputStream</code>
 * is created, an internal buffer array is
 * created. As bytes  from the stream are read
 * or skipped, the internal buffer is refilled
 * as necessary  from the contained input stream,
 * many bytes at a time. The <code>mark</code>
 * operation  remembers a point in the input
 * stream and the <code>reset</code> operation
 * causes all the  bytes read since the most
 * recent <code>mark</code> operation to be
 * reread before new bytes are  taken from
 * the contained input stream.
 *
 * @author  Arthur van Hoff
 * @since   JDK1.0
 */
public
class BufferedInputStream extends FilterInputStream {

    private static int defaultBufferSize = 8192;

    /**
     * The internal buffer array where the data is stored. When necessary,
     * it may be replaced by another array of
     * a different size.
     */
    protected volatile byte buf[];

    /**
     * Atomic updater to provide compareAndSet for buf. This is
     * necessary because closes can be asynchronous. We use nullness
     * of buf[] as primary indicator that this stream is closed. (The
     * "in" field is also nulled out on close.)
     */
    private static final
        AtomicReferenceFieldUpdater<BufferedInputStream, byte[]> bufUpdater =
        AtomicReferenceFieldUpdater.newUpdater
        (BufferedInputStream.class,  byte[].class, "buf");

    /**
     * The index one greater than the index of the last valid byte in
     * the buffer.
     * This value is always
     * in the range <code>0</code> through <code>buf.length</code>;
     * elements <code>buf[0]</code>  through <code>buf[count-1]
     * </code>contain buffered input data obtained
     * from the underlying  input stream.
     */
    protected int count;

    /**
     * The current position in the buffer. This is the index of the next
     * character to be read from the <code>buf</code> array.
     * <p>
     * This value is always in the range <code>0</code>
     * through <code>count</code>. If it is less
     * than <code>count</code>, then  <code>buf[pos]</code>
     * is the next byte to be supplied as input;
     * if it is equal to <code>count</code>, then
     * the  next <code>read</code> or <code>skip</code>
     * operation will require more bytes to be
     * read from the contained  input stream.
     *
     * @see     java.io.BufferedInputStream#buf
     */
    protected int pos;

    /**
     * The value of the <code>pos</code> field at the time the last
     * <code>mark</code> method was called.
     * <p>
     * This value is always
     * in the range <code>-1</code> through <code>pos</code>.
     * If there is no marked position in  the input
     * stream, this field is <code>-1</code>. If
     * there is a marked position in the input
     * stream,  then <code>buf[markpos]</code>
     * is the first byte to be supplied as input
     * after a <code>reset</code> operation. If
     * <code>markpos</code> is not <code>-1</code>,
     * then all bytes from positions <code>buf[markpos]</code>
     * through  <code>buf[pos-1]</code> must remain
     * in the buffer array (though they may be
     * moved to  another place in the buffer array,
     * with suitable adjustments to the values
     * of <code>count</code>,  <code>pos</code>,
     * and <code>markpos</code>); they may not
     * be discarded unless and until the difference
     * between <code>pos</code> and <code>markpos</code>
     * exceeds <code>marklimit</code>.
     *
     * @see     java.io.BufferedInputStream#mark(int)
     * @see     java.io.BufferedInputStream#pos
     */
    protected int markpos = -1;

    /**
     * The maximum read ahead allowed after a call to the
     * <code>mark</code> method before subsequent calls to the
     * <code>reset</code> method fail.
     * Whenever the difference between <code>pos</code>
     * and <code>markpos</code> exceeds <code>marklimit</code>,
     * then the  mark may be dropped by setting
     * <code>markpos</code> to <code>-1</code>.
     *
     * @see     java.io.BufferedInputStream#mark(int)
     * @see     java.io.BufferedInputStream#reset()
     */
    protected int marklimit;

    /**
     * Check to make sure that underlying input stream has not been
     * nulled out due to close; if not return it;
     */
    private InputStream getInIfOpen() throws IOException {
        InputStream input = in;
        if (input == null)
            throw new IOException("Stream closed");
        return input;
    }

    /**
     * Check to make sure that buffer has not been nulled out due to
     * close; if not return it;
     */
    private byte[] getBufIfOpen() throws IOException {
        byte[] buffer = buf;
        if (buffer == null)
            throw new IOException("Stream closed");
        return buffer;
    }

    /**
     * Creates a <code>BufferedInputStream</code>
     * and saves its  argument, the input stream
     * <code>in</code>, for later use. An internal
     * buffer array is created and  stored in <code>buf</code>.
     *
     * @param   in   the underlying input stream.
     */
    public BufferedInputStream(InputStream in) {
        this(in, defaultBufferSize);
    }

    /**
     * Creates a <code>BufferedInputStream</code>
     * with the specified buffer size,
     * and saves its  argument, the input stream
     * <code>in</code>, for later use.  An internal
     * buffer array of length  <code>size</code>
     * is created and stored in <code>buf</code>.
     *
     * @param   in     the underlying input stream.
     * @param   size   the buffer size.
     * @exception IllegalArgumentException if size <= 0.
     */
    public BufferedInputStream(InputStream in, int size) {
        super(in);
        if (size <= 0) {
            throw new IllegalArgumentException("Buffer size <= 0");
        }
        buf = new byte[size];
    }

    /**
     * Fills the buffer with more data, taking into account
     * shuffling and other tricks for dealing with marks.
     * Assumes that it is being called by a synchronized method.
     * This method also assumes that all data has already been read in,
     * hence pos > count.
     */
    private void fill() throws IOException {
        byte[] buffer = getBufIfOpen();
        if (markpos < 0)
            pos = 0;            /* no mark: throw away the buffer */
        else if (pos >= buffer.length)  /* no room left in buffer */
            if (markpos > 0) {  /* can throw away early part of the buffer */
                int sz = pos - markpos;
                System.arraycopy(buffer, markpos, buffer, 0, sz);
                pos = sz;
                markpos = 0;
            } else if (buffer.length >= marklimit) {
                markpos = -1;   /* buffer got too big, invalidate mark */
                pos = 0;        /* drop buffer contents */
            } else {            /* grow buffer */
                int nsz = pos * 2;
                if (nsz > marklimit)
                    nsz = marklimit;
                byte nbuf[] = new byte[nsz];
                System.arraycopy(buffer, 0, nbuf, 0, pos);
                if (!bufUpdater.compareAndSet(this, buffer, nbuf)) {
                    // Can't replace buf if there was an async close.
                    // Note: This would need to be changed if fill()
                    // is ever made accessible to multiple threads.
                    // But for now, the only way CAS can fail is via close.
                    // assert buf == null;
                    throw new IOException("Stream closed");
                }
                buffer = nbuf;
            }
        count = pos;
        int n = getInIfOpen().read(buffer, pos, buffer.length - pos);
        if (n > 0)
            count = n + pos;
    }

    /**
     * See
     * the general contract of the <code>read</code>
     * method of <code>InputStream</code>.
     *
     * @return     the next byte of data, or <code>-1</code> if the end of the
     *             stream is reached.
     * @exception  IOException  if this input stream has been closed by
     *                          invoking its {@link #close()} method,
     *                          or an I/O error occurs.
     * @see        java.io.FilterInputStream#in
     */
    public synchronized int read() throws IOException {
        if (pos >= count) {
            fill();
            if (pos >= count)
                return -1;
        }
        return getBufIfOpen()[pos++] & 0xff;
    }

    /**
     * Read characters into a portion of an array, reading from the underlying
     * stream at most once if necessary.
     */
    private int read1(byte[] b, int off, int len) throws IOException {
        int avail = count - pos;
        if (avail <= 0) {
            /* If the requested length is at least as large as the buffer, and
               if there is no mark/reset activity, do not bother to copy the
               bytes into the local buffer.  In this way buffered streams will
               cascade harmlessly. */
            if (len >= getBufIfOpen().length && markpos < 0) {
                return getInIfOpen().read(b, off, len);
            }
            fill();
            avail = count - pos;
            if (avail <= 0) return -1;
        }
        int cnt = (avail < len) ? avail : len;
        System.arraycopy(getBufIfOpen(), pos, b, off, cnt);
        pos += cnt;
        return cnt;
    }

    /**
     * Reads bytes from this byte-input stream into the specified byte array,
     * starting at the given offset.
     *
     * <p> This method implements the general contract of the corresponding
     * <code>{@link InputStream#read(byte[], int, int) read}</code> method of
     * the <code>{@link InputStream}</code> class.  As an additional
     * convenience, it attempts to read as many bytes as possible by repeatedly
     * invoking the <code>read</code> method of the underlying stream.  This
     * iterated <code>read</code> continues until one of the following
     * conditions becomes true: <ul>
     *
     *   <li> The specified number of bytes have been read,
     *
     *   <li> The <code>read</code> method of the underlying stream returns
     *   <code>-1</code>, indicating end-of-file, or
     *
     *   <li> The <code>available</code> method of the underlying stream
     *   returns zero, indicating that further input requests would block.
     *
     * </ul> If the first <code>read</code> on the underlying stream returns
     * <code>-1</code> to indicate end-of-file then this method returns
     * <code>-1</code>.  Otherwise this method returns the number of bytes
     * actually read.
     *
     * <p> Subclasses of this class are encouraged, but not required, to
     * attempt to read as many bytes as possible in the same fashion.
     *
     * @param      b     destination buffer.
     * @param      off   offset at which to start storing bytes.
     * @param      len   maximum number of bytes to read.
     * @return     the number of bytes read, or <code>-1</code> if the end of
     *             the stream has been reached.
     * @exception  IOException  if this input stream has been closed by
     *                          invoking its {@link #close()} method,
     *                          or an I/O error occurs.
     */
    public synchronized int read(byte b[], int off, int len)
        throws IOException
    {
        getBufIfOpen(); // Check for closed stream
        if ((off | len | (off + len) | (b.length - (off + len))) < 0) {
            throw new IndexOutOfBoundsException();
        } else if (len == 0) {
            return 0;
        }

        int n = 0;
        for (;;) {
            int nread = read1(b, off + n, len - n);
            if (nread <= 0)
                return (n == 0) ? nread : n;
            n += nread;
            if (n >= len)
                return n;
            // if not closed but no bytes available, return
            InputStream input = in;
            if (input != null && input.available() <= 0)
                return n;
        }
    }

    /**
     * See the general contract of the <code>skip</code>
     * method of <code>InputStream</code>.
     *
     * @exception  IOException  if the stream does not support seek,
     *                          or if this input stream has been closed by
     *                          invoking its {@link #close()} method, or an
     *                          I/O error occurs.
     */
    public synchronized long skip(long n) throws IOException {
        getBufIfOpen(); // Check for closed stream
        if (n <= 0) {
            return 0;
        }
        long avail = count - pos;

        if (avail <= 0) {
            // If no mark position set then don't keep in buffer
            if (markpos <0)
                return getInIfOpen().skip(n);

            // Fill in buffer to save bytes for reset
            fill();
            avail = count - pos;
            if (avail <= 0)
                return 0;
        }

        long skipped = (avail < n) ? avail : n;
        pos += skipped;
        return skipped;
    }

    /**
     * Returns an estimate of the number of bytes that can be read (or
     * skipped over) from this input stream without blocking by the next
     * invocation of a method for this input stream. The next invocation might be
     * the same thread or another thread.  A single read or skip of this
     * many bytes will not block, but may read or skip fewer bytes.
     * <p>
     * This method returns the sum of the number of bytes remaining to be read in
     * the buffer (<code>count&nbsp;- pos</code>) and the result of calling the
     * {@link java.io.FilterInputStream#in in}.available().
     *
     * @return     an estimate of the number of bytes that can be read (or skipped
     *             over) from this input stream without blocking.
     * @exception  IOException  if this input stream has been closed by
     *                          invoking its {@link #close()} method,
     *                          or an I/O error occurs.
     */
    public synchronized int available() throws IOException {
        int n = count - pos;
        int avail = getInIfOpen().available();
        return n > (Integer.MAX_VALUE - avail)
                    ? Integer.MAX_VALUE
                    : n + avail;
    }

    /**
     * See the general contract of the <code>mark</code>
     * method of <code>InputStream</code>.
     *
     * @param   readlimit   the maximum limit of bytes that can be read before
     *                      the mark position becomes invalid.
     * @see     java.io.BufferedInputStream#reset()
     */
    public synchronized void mark(int readlimit) {
        marklimit = readlimit;
        markpos = pos;
    }

    /**
     * See the general contract of the <code>reset</code>
     * method of <code>InputStream</code>.
     * <p>
     * If <code>markpos</code> is <code>-1</code>
     * (no mark has been set or the mark has been
     * invalidated), an <code>IOException</code>
     * is thrown. Otherwise, <code>pos</code> is
     * set equal to <code>markpos</code>.
     *
     * @exception  IOException  if this stream has not been marked or,
     *                  if the mark has been invalidated, or the stream
     *                  has been closed by invoking its {@link #close()}
     *                  method, or an I/O error occurs.
     * @see        java.io.BufferedInputStream#mark(int)
     */
    public synchronized void reset() throws IOException {
        getBufIfOpen(); // Cause exception if closed
        if (markpos < 0)
            throw new IOException("Resetting to invalid mark");
        pos = markpos;
    }

    /**
     * Tests if this input stream supports the <code>mark</code>
     * and <code>reset</code> methods. The <code>markSupported</code>
     * method of <code>BufferedInputStream</code> returns
     * <code>true</code>.
     *
     * @return  a <code>boolean</code> indicating if this stream type supports
     *          the <code>mark</code> and <code>reset</code> methods.
     * @see     java.io.InputStream#mark(int)
     * @see     java.io.InputStream#reset()
     */
    public boolean markSupported() {
        return true;
    }

    /**
     * Closes this input stream and releases any system resources
     * associated with the stream.
     * Once the stream has been closed, further read(), available(), reset(),
     * or skip() invocations will throw an IOException.
     * Closing a previously closed stream has no effect.
     *
     * @exception  IOException  if an I/O error occurs.
     */
    public void close() throws IOException {
        byte[] buffer;
        while ( (buffer = buf) != null) {
            if (bufUpdater.compareAndSet(this, buffer, null)) {
                InputStream input = in;
                in = null;
                if (input != null)
                    input.close();
                return;
            }
            // Else retry in case a new buf was CASed in fill()
        }
    }
}

BufferedInputStream的实现呢是先将流中的一部分数据读取到自己成员变量protected volatile byte buf[];中去，然后再从这个byte数组中去读。而读取到byte数组中的实现就需要依赖传给他的in了，可能是FileInputStream,也可能是ByteArrayInputStream。可以看看fill()方法，就会明白了。

//这行代码就是利用传进来的流进行读取，读取的byte数组存在buffer中
int n = getInIfOpen().read(buffer, pos, buffer.length - pos);
下面是getInIfOpen()方法
private InputStream getInIfOpen() throws IOException {
        InputStream input = in;
        if (input == null)
            throw new IOException("Stream closed");
        return input;
    }

BufferedInputStream还实现了一个功能，就是标记和重读。，对了这里需要强调一点，java的原生态io流是不可以回读的，就像个管道一样，我取出了管道前面的水，那么他就不在管道中了。

具体的用法呢，我还没完全搞明白，先说说我理解明白的部分。。。

首先我们要关注BufferedInputStream定义的这么几个成员变量

//从流中读取的总量
protected int count;
//当前读取的位置
protected int pos;
//标记的位置
protected int markpos = -1;
//这个我暂时没想好怎么解释他，不好用官方的解释，和功能不对应
protected int marklimit;

以数组{1,2,3,4,5,6}为例

　　　　　　　byte[] b = {1,2,3,4,5,6};
            InputStream out = new BufferedInputStream(new ByteArrayInputStream(b),3);//读取b数组的信息，其中设置BufferedInputStream的缓冲buffer为3
            System.out.println(out.read());//调用read之后pos由0变为1，count由0变为3
            out.mark(1);//此刻marklimit = readlimit;markpos = pos = 1;
            System.out.println(out.read());
            System.out.println(out.read());
            out.reset();//pos = markpos = 1;
            System.out.println(out.read());//所以又从数组1的位置开始读了，
            System.out.println(out.read());
            System.out.println(out.read());
            System.out.println(out.read());
            out.close();

以上只用了常规的写法，关于marklimit 字段的讨论放到以后去，今天就写到这