C# TSC打印二维码和条形码

效果图

 

开发、使用环境说明

1. 安装TSC_7.3.8_M-3.exe打印机驱动，安装时选择对应的ttp 244 pro
2. 将TSCLIB.dll复制到C:Windowssystem

驱动安装说明

 

  选择下一步

 

  选择安装路径，默认即可，选择下一步

 

   选择安装打印机，选择下一步

 

  选择其他，点击下一步

 

  选择对应的打印机型号，点击下一步

 

  选择USB端口，点击下一步

 

  直接默认即可，点击下一步

  驱动安装完成

TSCLIB.cs代码：

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Runtime.InteropServices;

namespace WindowsFormsPrint
{
    public class TSCLIB_DLL
    {
        [DllImport("TSCLIB.dll", EntryPoint = "about")]
        public static extern int about();

        [DllImport("TSCLIB.dll", EntryPoint = "openport")]
        public static extern int openport(string printername);

        [DllImport("TSCLIB.dll", EntryPoint = "barcode")]
        public static extern int barcode(string x, string y, string type,
                    string height, string readable, string rotation,
                    string narrow, string wide, string code);

        [DllImport("TSCLIB.dll", EntryPoint = "clearbuffer")]
        public static extern int clearbuffer();

        [DllImport("TSCLIB.dll", EntryPoint = "closeport")]
        public static extern int closeport();

        [DllImport("TSCLIB.dll", EntryPoint = "downloadpcx")]
        public static extern int downloadpcx(string filename, string image_name);

        [DllImport("TSCLIB.dll", EntryPoint = "formfeed")]
        public static extern int formfeed();

        [DllImport("TSCLIB.dll", EntryPoint = "nobackfeed")]
        public static extern int nobackfeed();

        [DllImport("TSCLIB.dll", EntryPoint = "printerfont")]
        public static extern int printerfont(string x, string y, string fonttype,
                        string rotation, string xmul, string ymul,
                        string text);

        [DllImport("TSCLIB.dll", EntryPoint = "printlabel")]
        public static extern int printlabel(string set, string copy);

        [DllImport("TSCLIB.dll", EntryPoint = "sendcommand")]
        public static extern int sendcommand(string printercommand);

        [DllImport("TSCLIB.dll", EntryPoint = "setup")]
        public static extern int setup(string width, string height,
                  string speed, string density,
                  string sensor, string vertical,
                  string offset);

        [DllImport("TSCLIB.dll", EntryPoint = "windowsfont")]
        public static extern int windowsfont(int x, int y, int fontheight,
                        int rotation, int fontstyle, int fontunderline,
                        string szFaceName, string content);




        //打开打印机端口,并进行相关设置
        public static void openportExt()
        {
            TSCLIB_DLL.openport("TSC TTP-244 Pro");//找打打印机端口
            TSCLIB_DLL.sendcommand("SIZE 60 mm,30 mm");//设置条码大小
            TSCLIB_DLL.sendcommand("GAP 2 mm,0");//设置条码间隙
            TSCLIB_DLL.sendcommand("SPEED 4");//设置打印速度
            TSCLIB_DLL.sendcommand("DENSITY 7");//设置墨汁浓度
            TSCLIB_DLL.sendcommand("DERECTION 1");//设置相对起点
            TSCLIB_DLL.sendcommand("REFERENCE 3 mm,3 mm");//设置偏移边框
            TSCLIB_DLL.sendcommand("CLS");//清除记忆（每次打印新的条码时先清除上一次的打印记忆）
        }
        //打印在用车档案二维码
        public static void printVehicleCode(string str_hetong, string str_zhengjian, string str_name)
        {
            char space = (char)(32);
            string codeValue = str_hetong + space + str_zhengjian;
            TSCLIB_DLL.sendcommand("CLS");//需要清除上一次的打印记忆
            TSCLIB_DLL.sendcommand("QRCODE 260,20,H,7,A,0,M2,S7,"" + codeValue + """);
            TSCLIB_DLL.windowsfont(240, 100, 24, 180, 0, 0, "黑体", str_hetong);
            TSCLIB_DLL.windowsfont(240, 140, 24, 180, 0, 0, "黑体", str_zhengjian);
            TSCLIB_DLL.windowsfont(240, 180, 24, 180, 0, 0, "黑体", str_name);
            TSCLIB_DLL.printlabel("1", "1");
        }

        //打印财务条形码
        public static void printFinanceCode(string str_Date, string str_siteNo,
            string str_siteName, string str_Num, string str_Name, int count)
        {
            for (int i = 0; i < count; i++)
            {
                char Num = (char)(i + 65);
                char space = (char)(32);
                string value = str_Date + space + str_siteNo + space + str_Num + space + Num;
                string txt = str_Date + space + str_siteName + space + str_Num + space + str_Name + space + Num;
                TSCLIB_DLL.sendcommand("CLS");//需要清除上一次的打印记忆
                TSCLIB_DLL.barcode("40", "50", "128", "160", "0", "0", "2", "2", value);
                TSCLIB_DLL.windowsfont(440, 35, 24, 180, 0, 0, "黑体", txt);
                TSCLIB_DLL.printlabel("1", "1");
            }
        }

        //关闭打印机端口
        public static void closeportExt()
        {
            TSCLIB_DLL.closeport();
        }
    }
}

打印二维码：

        private void print_Click(object sender, EventArgs e)
        {
            try
            {
                print.Enabled = false;
                base.DoWork(DoPrint);
                print.Enabled = true;
            }
            catch (Exception ex)
            {
                //   FileLogHelper.WriteInfoLog(ex.ToString());
                MessageBox.Show(ex.ToString());
            }

        }

        private void DoPrint(object sender, EventArgs e)
        {
            DataGridViewSelectedRowCollection rows = ArchivesView.SelectedRows;
            if (rows.Count <= 0)
            {
                MessageBox.Show("请先选择数据项！");
                return;
            }
            TSCLIB_DLL.openportExt();
            foreach (DataGridViewRow dr in rows)
            {
                TSCLIB_DLL.printVehicleCode(dr.Cells[1].Value.ToString(), dr.Cells[2].Value.ToString(), dr.Cells[3].Value.ToString());
            }
            TSCLIB_DLL.closeportExt();
        }

C#调用dll提示"试图加载格式不正确的程序"解决方法

程序在32位操作系统上运行正常，在64位操作系统上运行读卡功能提示”试图加载格式不正确“。

程序在64位操作系统上运行正常，在64位操作系统上运行读卡功能提示”试图加载格式不正确“。

--------------------------------------------------------------------------------------------

点击项目属性，把目标平台Any CPU 设置为X86（32位操作系统）或者X64（64位操作系统）

按照上面解决方案可能会有下面的问题：

 C# form继承问题 ： 提示 无法加载基类 ；请确保已引用该程序集并已生成所有项目。 

 把 生成 - 目标平台 改成 x86或者Any CPU ，重新生成一次，Form可正常编辑。 

 

所以新的解决方案是：选择Any CPU 把下面打勾的去掉