XmlSerializer vs DataContractSerializer: Serialization in Wcf

The XmlSerializer has been in .Net since version 1.0 and has served us well for everything from Remoting, Web Services, serializing to a file, etc. However in .Net 3.0 the DataContractSerializer came along.  And all of a sudden a lot of guidance suggests that we should use it over the old tried and true XmlSerializer. Wcf even uses this as the default mechanism for serialization.  The question is, “Is it really better?”.  The verdict is yes, and no.  Like most things it depends on your implementation and what you need.  For Wcf, you should prefer to use the DataContractSerializer.  If you need full control over how the xml looks though, you should go back to the XmlSerializer.

Lets look at the both of these in detail and leave it up to you to decide which is best for your implementation.  Here are a few of the advantages and disadvantages of each of them:

XmlSerializer

DataContractSerializer

Advantages: 1. Opt-out rather than opt-in properties to serialize. This mean you don’t have to specify each and every property to serialize, only those you don’t wan to serialize2. Full control over how a property is serialized including it it should be a node or an attribute 3. Supports more of the XSD standard Disadvantages: 1. Can only serialize properties 2. Properties must be public 3. Properties must have a get and a set which can result in some awkward design 4. Supports a narrower set of types 5. Cannot understand the DataContractAttribute and will not serialize it unless there is a SerializableAttribute too

Advantages: 1. Opt-in rather than opt-out properties to serialize. This mean you specify what you want serialize 2. Because it is opt in you can serialize not only properties, but also fields.  You can even serialize non-public members such as private or protected members. And you dont need a set on a property either (however without a setter you can serialize, but not deserialize) 3. Is about 10% faster than XmlSerializer to serialize the data because since you don’t have full control over how it is serialize, there is a lot that can be done to optimize the serialization/deserialization process. 4. Can understand the SerializableAttribute and know that it needs to be serialized 5. More options and control over KnownTypes Disadvantages: 1. No control over how the object is serialized outside of setting the name and the order

What is Serialization?

Let’s start with the basics.  Serialization has been a key part of .Net since version 1.  It is basically the process of converting an object instance into a portable and transferable format.  The objects can be serialized into all sorts of formats.  Serializing to Xml is most often used for its interoperability.  Serializing to binary is useful when you want to send the object from one .Net application to another.  .Net even supports the interfaces and base classes to build your own serializes. There are libraries out there to serialize to comma delimited strings, JSON, etc.

Deserialization is basically the reverse of serialization.  Its the process of taking some data (Xml, binary, etc) and converting it back into an object.

What is the XmlSerialzer?

For those that may not be familiar with System.Xml.Serialization.XmlSerializer let’s go over it briefly.  This is the xml serializer that has been around since .Net version one.  To serialize or deserialize an object, you basically just need to create an instance of the XmlSerializer for the type you want to work with, then just call Serialize() or Deserialize().  It works with streams, so you could serialize to any stream such as an MemoryStream, FileStream, etc.

// Create serializer for the type


System.Xml.Serialization.XmlSerializer xmlSerializer =

    new
 System.Xml.Serialization.XmlSerializer(typeof
(MyType)); 



// Serialize from an object to a stream


xmlSerializer.Serialize(stream, myInstanceOfMyType); 



// Deserialize from a stream to an object


myInstanceOfMyType = (MyType)xmlSerializer.Deserialize(stream);

However not just any object can be serialized.  It supports a number of the base types in .Net and most custom types.  Many people think that the SerializableAttribute is required on the class in order for it to be serializable by the XmlSerializer, but this is not the case.  It is good practice to use the SerializableAttribute, but it not required.  As long as your class contains all types that the serializer understands, then it will work.  You need to break out IXmlSerializable to implement your own custom serialization for types that the XmlSerializer cannot understand.  Any public property that is of a known serializable type and has a get and set will be serialized by the XmlSerialzer.  This can be referred to as an “opt-out” approach, because you chose what you don’t want to include, not what you want to include.

There are a number of attributes you can use in your class to change how it is serialized:

1. System.Xml.Serialization.XmlIgnoreAttribute : This is used to mark a public property as “not to be serialized”. This is the “opt-out” approach used by the XmlSerializer.  There are no properties on this attribute.
2. System.Xml.Serialization.XmlRootAttribute : This is used on the class itself to change the name or namespace of the root node. The following properties are supported on the attribute:
   1. AttributeName: Gets or sets the name of the XML attribute.
   2. DataType: Gets or sets the XSD data type of the XML attribute generated by the XmlSerializer .
   3. Form: Gets or sets a value that indicates whether the XML attribute name generated by the XmlSerializer is qualified.
   4. Namespace: Gets or sets the XML namespace of the XML attribute.
   5. Type: Gets or sets the complex type of the XML attribute.
   6. TypeId: When implemented in a derived class, gets a unique identifier for this Attribute .
3. System.Xml.Serialization.XmlAttributeAttribute : Serialize the property as an xml attribute.  You can specify things such as the name to use (instead of the property name).  The following properties are supported on the attribute:
   1. AttributeName: Gets or sets the name of the XML attribute.
   2. DataType: Gets or sets the XSD data type of the XML attribute generated by the XmlSerializer .
   3. Form: Gets or sets a value that indicates whether the XML attribute name generated by the XmlSerializer is qualified.
   4. Namespace: Gets or sets the XML namespace of the XML attribute.
   5. Type: Gets or sets the complex type of the XML attribute.
   6. TypeId: When implemented in a derived class, gets a unique identifier for this Attribute .
4. System.Xml.Serialization.XmlElementAttribute : Serialize the property as an xml element.  You can specify things such as the name to use (instead of the property name), whether or not to serialize it if it is null, the order to serialize the property in relative to other properites, etc. The following properties are supported on the attribute:
   1. ElementName: Gets or sets the name of the XML element.
   2. DataType: Gets or sets the XSD data type of the XML attribute generated by the XmlSerializer .
   3. Form: Gets or sets a value that indicates whether the XML attribute name generated by the XmlSerializer is qualified.
   4. Namespace: Gets or sets the XML namespace of the XML attribute.
   5. IsNullable: Gets or sets a value that indicates whether the XmlSerializer must serialize a member that is set to nullNothingnullptra null reference (Nothing in Visual Basic) as an empty tag with the xsi:nil attribute set to true.
   6. Order: Gets or sets the explicit order in which the elements are serialized or deserialized.
   7. Type: Gets or sets the complex type of the XML attribute.
   8. TypeId: When implemented in a derived class, gets a unique identifier for this Attribute .

Here is an example class setup to use the XmlSerializer.  The only thing fancy here is that I don’t want to serialize the Social Security number:

[System.Serializable]

public
 class
 Individual

{

    private
 string
 m_FirstName;

    private
 string
 m_LastName;

    private
 int
 m_SocialSecurityNumber; 



    public
 string
 FirstName

    {

        get { return
 m_FirstName; }

        set { m_FirstName = value
; }

    } 



    public
 string
 LastName

    {

        get { return
 m_LastName; }

        set { m_LastName = value
; }

    } 



    [System.Xml.Serialization.XmlIgnore]

    public
 int
 SocialSecurityNumber

    {

        get { return
 m_SocialSecurityNumber; }

        set { m_SocialSecurityNumber = value
; }

    } 



    public
 Individual()

    {

    }

    public
 Individual(string
 firstName, string
 lastName)

    {

        m_FirstName = firstName;

        m_LastName = lastName;

    }

}

What is the DataContractSerializer?

The System.Runtime.Serialization.DataContractSerializer is new in .Net 3.0 and was designed for contract-first development and speed.  Specifically it was brought in to be used by Wcf, but can be used for general serialization as well. Using the DataContractSerializer isn’t that much different than using the XmlSerializer.  There are a few more options, but the only real key difference is that you use a WriteObject() method to serialize instead of a Serialize() method and a ReadObject() method to deserialize instead of a Deserialize() method.  It works with the same types of streams, so you can write to memory, files, etc.

DataContractSerializer dataContractSerializer =

    new
 DataContractSerializer(typeof
(MyType)); 



// Serialize from an object to a stream


dataContractSerializer.WriteObject(stream, myInstanceOfMyType); 



// Deserialize from a stream to an object


myInstanceOfMyType = (MyType)dataContractSerializer.ReadObject(stream);

One thing to note: before you can use the DataContactSeriliazer, you must include a reference to System.Runtime.Serialization.  mscorelib gives you some parts of System.Runtime.Serialization, but you must include this reference to get the DataContactSeriliazer and the associated attributes.

Again, not just any object can be serialized.  It supports a number of the base types in .Net and most custom types.  One nice advantage that the DataContractSerializer has over the XmlSerializer is that it understands the SerializableAttribute and classes built for the XmlSerializer or ISerializable.  So if your class is declared with an DataContactAttribute and it contains a type that uses the SerializableAttibute, all will be well.  Unlike the XmlSerializer though you must define either the SerializableAttribute or the DataContractAttributeon the class in order for it to be serializable by the DataContractSerializer.

The DataContactSerializer implements an “opt-in” approach.  The basically means that you have to explicitly say what will be serialized by adding the DataMemeberAttribute to it.  The nice thing about this is that this attribute can be applied to fields and well as properties, you can set it on any access modified (private, protected, etc) not just public, and you can use it on properties that do not have a “set”.  However if you label a property that doesn’t have a “set”, then you can only serialize that property.  You won’t be able to deserialize it since it has no idea how to set the property.  This also means you cant use it for communication over Wcf.  But you can still use a “private set” to ensure that your model is clean.  However, you cannot specify that properties should be xml attributes and control other more complex things about how the xml will look.  It hurts not having this flexibility, but because of this rigidness, the format is highly predictable and the serializer can make some big optimizations.  The DataContractSerializer can serialize and deserialize about 10% faster than the XmlSerializer.  This can be pretty significant if you are working with a lot of data.

There are really only 2 attributes to use in your class:

1. System.Runtime.Serialization.DataContactAttribute : Declares that the class is serializable and allows you to specify the namespace and name to serialize it as.  This is similar to a combination of the SerializableAttribute and XmlRootAttribute in the XmlSerializer. The following properties are supported on the attribute:
   1. Name: Gets or sets the name of the data contract for the type.
   2. Namespace: Gets or sets the namespace for the data contract for the type.
   3. TypeId:When implemented in a derived class, gets a unique identifier for this Attribute .
2. System.Runtime.Serialization.DataMemberAttribute : This is used to declare a property or a field to be serialized.  This can work with any access modifier.  The following properties are supported on the attribute:
   1. EmitDefauleValue: Gets or sets a value that specifies whether to serialize the default value for a field or property being serialized.
   2. IsRequired: Gets or sets a value that instructs the serialization engine that the member must be present when reading or deserializing.
   3. Name: Gets or sets a data member name.
   4. Order: Gets or sets the order of serialization and deserialization of a member.  This can be pretty powerful if you have fields that might depend on one another and you really need to define the order that the properties are serialize and deserialized in.
   5. TypeId: When implemented in a derived class, gets a unique identifier for this Attribute .

If you are going to work with the DataMemberAttribute, here is an concise post about best practices around it: http://blogs.msdn.com/drnick/archive/2008/02/22/datamember-best-practices

Below example class setup to use the DatContractSerializer.  Notice that I am explicitly setting the DataMemberAttribute on the properties I want to serialize, but not on the others.

[DataContract]

public
 class
 Individual

{

    private
 string
 m_FirstName;

    private
 string
 m_LastName;

    private
 int
 m_SocialSecurityNumber; 



    [DataMember]

    public
 string
 FirstName

    {

        get { return
 m_FirstName; }

        set { m_FirstName = value
; }

    } 



    [DataMember]

    public
 string
 LastName

    {

        get { return
 m_LastName; }

        set { m_LastName = value
; }

    } 



    public
 int
 SocialSecurityNumber

    {

        get { return
 m_SocialSecurityNumber; }

        set { m_SocialSecurityNumber = value
; }

    } 



    public
 Individual()

    {

    }

    public
 Individual(string
 firstName, string
 lastName)

    {

        m_FirstName = firstName;

        m_LastName = lastName;

    }

}

One other important thing to talk about with the DataContractSerializer are the ServiceKnownTypeAttribute and KnownTypeAttribute attributes.  These are similar to the XmlIncludeAttribute used by the XmlSerializer.  When used in Wcf, these identify what types should be represented in the WSDL that is generated.

The KnownTypeAttribute specifies types that should be recognized by the DataContractSerializer when serializing and deserializing a type.  It is applied to a class and basically specifies what other types are used in the class.  You don’t need to specify known .Net types, but any custom classes should be added here.  This attribute can be used multiple times to identify multiple types.

[DataContract]

[KnownType(typeof
(MyOtherType))]

public
 class
 MyType

{

    [DataMember]

    public
 MyOtherType TheOtherType;

} 



[DataContract]

public
 class
 MyOtherType

{

    [DataMember]

    public
 string
 MyValue;

}

The ServiceKnownTypeAttribute specifies known types to be used by a service when serializing or deserializing.  It is applied to a ServiceContract or to an OperationContract and specifies what types are used in the methods.  Again (like the KnownTypeAttribute), you don’t need to specify known .Net types and this attribute can be used multiple times to identify multiple types.

[ServiceContract]

[ServiceKnownType(typeof
(MyType))]

[ServiceKnownType(typeof
(MyOtherType))]

public
 interface
 MyService

{

    [OperationContract]

    [ServiceKnownType(typeof
(YetAnotherType))]

    void
 MyMethod();

}

What about the NetDataContractSerializer?

I haven’t really mentioned this yet because it is just like the DataContractSerializer, but there is also a System.Runtime.Serialization.NetDataContractSerializer .  It differs from the DatContactSerializer in that it includes CLR type information in the serialized xml, whereas the DataContractSerializer does not.  So it can only work if the serializing and derserializing ends share the same CLR types.   The nice thing about this serializer is that since the CLR type information is sent around, you don’t have to implement the ServiceKnownTypeAttirbute or KnownTypeAttribute. Like the DataContractSerializer it can work serialize types that implement either the DataContractAttribute, SerializableAttribute, or ISerializable.

I don’t recommend using this serializer often.  If possible you should declare your known types explicitly for better understand of the code and of course for the greater interoperability.

Why another xml serializer?

So why the need to even create another xml serializer? The XmlSerializer has served us well over the years.  Well part of it it speed.  Since the DataContracts are faster to serialize because the structure is predictable and can be more highly optimized.  This results in about a 10% performance gain.  If you are working with pure Wcf the gain in speed is probably worth the trade off in loss of control over what the Xml is to look like.  Sometimes you might need to control what the xml looks like to get it to fit to some other schema.  If that is the case, then you will want to switch to the XmlSerializer.

There is more to the story.  Microsoft wants us think of in terms of “Contracts” with Wcf.  We often hear the term “Contract First Development”.  Some of this principal is already in play by forcing all Wcf Services to be defined in an interface (contract).  In the old days of pure WebServices, you could just tag a class as WebService and you didn’t need a separate interface or contract.  In some respects, the DataContractSerializer is pushing us down this route too.  By declaring a class as a DataContract and explictily setting the DataMembers, you are building a contract of how the class should look.  One could argue that you could do this through the Serializable attribute, however you don’t define what goes in the contract. Instead you only specify what isn’t suppose to be serialized and the serializer decides what is should serialize.  There is no way to look at the class or use reflection and really get a good feel for the data contract for the class.  While with the DataContract and DataMember attributes, you could use reflection to see exactly what the contract is.

How to change Wcf to use a different serializer?

By default Wcf uses the DataContactSerializer, so if you want to use it, you need to do nothing else.  If you want to use the XmlSerializer through, all you need to do is add the System.ServiceModel.XmlSerializerFormatAttribute to the contact interface.  The nice thing about this attribute is that it can be applied to the entire service contract, or just to an operation contract.  So you could keep the entire service as a whole using the DataContractSerializer, but only the methods you chose to use the XmlSerializer.

[ServiceContract]

[XmlSerializerFormat]

public
 interface
 MyService

{

    [OperationContract]

    [XmlSerializerFormat]

    void
 MyMethod();

}

You can also set the service to use the XmlSerilizer by default, but specify which methods use the DataContractSerializer with the help of the System.ServiceModel.DataContractFormatAttribute :

[ServiceContract]

[XmlSerializerFormat]

public
 interface
 MyService

{

    [OperationContract]

    [DataContractFormat]

    void
 MyMethod();

}

Now what about changing to use the NetDataContractSerializer.  Or what if I want to use a different serializer or create my own? In order to do this you need to create a custom operation behavior using the IOperationBehavior interface and the Attribute class.

Here is an example of a custom operation behavior written to use the NetDataContractSerialier.  You could use this, build your own, or modify it to work with a different serializer.

public
 class
 NetDataContractFormatAttribute : Attribute, IOperationBehavior

{

    public
 void
 AddBindingParameters(OperationDescription description, BindingParameterCollection parameters)

    {

    } 



    public
 void
 ApplyClientBehavior(OperationDescription description, ClientOperation proxy)

    {

        ReplaceDataContractSerializerOperationBehavior(description);

    } 



    public
 void
 ApplyDispatchBehavior(OperationDescription description, DispatchOperation dispatch)

    {

        ReplaceDataContractSerializerOperationBehavior(description);

    }

    public
 void
 Validate(OperationDescription description)

    {

    } 



    private
 static
 void
 ReplaceDataContractSerializerOperationBehavior (OperationDescription description)

    {

        DataContractSerializerOperationBehavior dcs = description.Behaviors.Find<DataContractSerializerOperationBehavior>(); 



        if
 (dcs != null
)

            description.Behaviors.Remove(dcs); 



        description.Behaviors.Add(new
 NetDataContractSerializerOperationBehavior(description));

    } 



    public
 class
 NetDataContractSerializerOperationBehavior : DataContractSerializerOperationBehavior

    {

        private
 static
 NetDataContractSerializer serializer = new
 NetDataContractSerializer(); 



        public
 NetDataContractSerializerOperationBehavior(OperationDescription operationDescription) : base
(operationDescription) { } 



        public
 override
 XmlObjectSerializer CreateSerializer(Type type, string
 name, string
 ns, IList<Type> knownTypes)

        {

            return
 NetDataContractSerializerOperationBehavior.serializer;

        } 



        public
 override
 XmlObjectSerializer CreateSerializer(Type type, XmlDictionaryString name, XmlDictionaryString ns, IList<Type> knownTypes)

        {

            return
 NetDataContractSerializerOperationBehavior.serializer;

        }

    }

}Once you have this
 you can just mark up your service like before using
 the new
 attribute:



[ServiceContract]

[NetDataContractSerializerFormat]

public
 interface
 MyService

{

    [OperationContract]

    void
 MyMethod();

}

Once you have this you can just mark up your service like before using the new attribute:

[ServiceContract]

[NetDataContractSerializerFormat]

public
 interface
 MyService

{

    [OperationContract]

    void
 MyMethod();

}

When to use which serializer?

For Wcf, you should prefer to use the DataContractSerializer.  If you need full control over how the xml looks though, you should go back to the XmlSerializer.   If you are doing general serialization, it is up to you, but I would weigh out the advantages and disadvantages.  I would still prefer the DataContractSerializer for the same reasons I prefer it for Wcf.  I do not recommend using the NetDataContractSerializer unless you have to.  You can lose too much interoperability and its not as descriptive.

If you need some custom xml serializer, by all means go ahead and implement it.  Wcf supports any serializer you can throw at it.  Just be careful not to “reinvent the wheel”.  The XmlSerializer is very configurable and may suit your needs. If that doesn’t work, then ISerializable gives you full control.